You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Economical and Reliable Adaptive Disturbance Cancellation for Lightly Damped Systems

    SBC: PLANNING SYSTEMS, INC.            Topic: N/A

    Efforts to apply active noise and vibration control commercially, while intensifying, continue to be hampered by the cost of the computers required to implement the active algorithms. Currently, the cost of wide-band control is prohibitive for lightly damped systems such as precision structures or highly reverberant acoustic spaces, even if the system has just one canceling actuator and one error ...

    SBIR Phase I 1997 Department of DefenseAir Force
  2. Liquid Rocket Engine Combustion Components Fabricated from ZrB2/BN Composite Using Electroconsolidation (TM) Rapid Densification Technique

    SBC: Sensintel Inc.            Topic: N/A

    The goal of this program is to design and fabricate selected liquid rocket engine combustion components. This goal will be accomplished by developing a low-cost, near net-shape technology for fabrication and rapid densification of ablation and oxidation-resistant LRE components for a wide variety of Air Force missions. The material which will be used for this purpose is zirconium diboride/boron ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  3. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. Non-invasive, Real-Time Measurement of Cognitive Workland for Adaptive Aiding of the Overburdened Decision-Maker

    SBC: Applied Innovation, Inc.            Topic: N/A

    This project will conceptually design and demonstrate the feasibility of a multivariate approach to the real-time measurement of cognitive workload, basedon operator psychophysiology as well as behavior, in the context of task demands. Such as approach will facilitate the development of cooperative human-computer controversy over how to implement such capabilities, including how to ascertain the ...

    SBIR Phase I 1997 Department of DefenseAir Force
  5. Advanced Six-Degree-of-Freedom (6-D) Laser Measurement System

    SBC: AUTOMATED PRECISION, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  6. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  7. Flight Control Technology

    SBC: DIGITAL SYSTEM RESOURCES, INC.            Topic: N/A

    The Air Force has identified the need to develop affordable flight control technology to support Air Force Global Engagement objectives. Of particular interest to the Air Force is the development of real-time optimization algorithms for cooperative engagement solutions among Uninhabited Air Vehicles (UAV) in a multiple target environment. DSR proposes developing a real-time, rule based, Cooperat ...

    SBIR Phase I 1997 Department of DefenseAir Force
  8. Development of High Quality and Large (3 & 4 Inch Diameter) Cd[sub 1-x]Zn[sub x]Te Substrates Lattice Ma

    SBC: EPIR TECHNOLOGIES INC            Topic: N/A

    The fabrication of large format, long wavelength (LWIR) mercury cadmium telluride based focal plane arrays (FPAs) is highly desirable for Air Force applications such as satellite power and array cooling reduction along with higher resolution. However, the development of large FPAs has been seriously impeded by the limited size of commercially available bulk Cd{sub 1-x}Zn{sub x}Te substrates. In ...

    SBIR Phase I 1997 Department of DefenseAir Force
  9. Digital Model Reuse through Reconfigurable Pattern Translation

    SBC: GMA INDUSTRIES, INC.            Topic: N/A

    This project involves research and development of a means for reusing existing digital models and test vectors generated using the LASAR and HITS ATPG for digital test programs that are currently hosted on absolete and non-supported automatic test equipment. The approach identified herein promotes translation of LASAR and HITS ATPG into VXIbus-compatible instrument functions that are interoperabl ...

    SBIR Phase I 1997 Department of DefenseAir Force
  10. Nondestructive Ultrasonic Near-Surface Residual Stress Measurements in Aircraft Wheels

    SBC: Industrial Quality, Inc.            Topic: N/A

    An ultrasonic Rayleigh surface wave method is propose to determine residual stress depth profile in aluminum aircraft wheels. The Rayleigh wave method has several distinct advantages. The residual stress depth profile can be easily obtained by altering the penetration depth of the Rayleigh wave. The Rayleigh wave is bound to the surface of the wheel, enabling measurements on curved and ...

    SBIR Phase I 1996 Department of DefenseAir Force
US Flag An Official Website of the United States Government