You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. A Compact X-Ray Laser

    SBC: Tetra Corporation            Topic: N/A

    The advanced technology described in this proposal promises to increase the performance of laboratory and, specifically, tabletop x-ray lasers by up to an order of magnitude. Such gains in performance coupled with compact technology will lead to the introduction of the world s first table-top, commercial x-ray laser. Tetra proposes to develop an advanced driver for the laboratory laser based upo ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  2. Active Suppression of Thruster Induced Seeker Jitter Using Electro-

    SBC: PROPULSION RESEARCH, INC.            Topic: N/A

    SEEKER STABILIZATION VIBRATION SUPPRESSION ELECTRO-ACTIVE MATERIALS PROPULSION RESEARCH WILL USE ITS MINIATURE "FERRO-MAGNETIC" ACTUATOR EFFORTD CAN BE USED TO CREATE A "SEEKER ANTI-MOTION SYSTEM". THIS TECHNOLOGY TAKES AN AGGRESSIVE APPROACH TOWARD "INTELLIGENTLY" MANAGING THE SEEKER DYNAMIC RESPONSE TO INDUCED MOTION BY ISOLATING IT "DYNAMICALLY" FROM THE REAMINDER OF THE AIRFRAME USING ELECTRO- ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  3. Advanced Metal Powder Manufacture for MLCC Applications

    SBC: NANOCHEM RESEARCH, INC.            Topic: N/A

    Sensors, capacitors, and conducting features such as resistors and capacitors on circuit boards are produced from metal and ceramic powders 1-12 These powders are manufactured by liquid phase precipitation routes which often start with reduction of metal salts or by solid-state routes where solid reactants are mixed, heated and then milled. The solid-state processing is generally repeated several ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. Advanced Projectile Diverters for Strategic Defense and Theater Missile Defense Miniature Interceptor Applications

    SBC: Tg&c Assoc., Inc.            Topic: N/A

    This proposal addresses the exploratory development and evaluation of novel thin film and/or monolithic detonators as diverters for guided spinning projectile use. A number of such detonators comprise a diverter technology termed RMDM, (for Ring Matrix Diverter Module) which, along with the SSPG (for Small Spinning Projectile Guidance) seeker, forms the basis for inexpensive miniature guided proje ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  5. A Novel High Thermal Conductivity, Low CTE, Low Weight MMC Substrate for Microelectronics Packaging

    SBC: ATS-MER, LLC            Topic: N/A

    This Small Business Innovation Research Phase I program proposes the development of a high thermal conductivity (470-550 W/mK), low coefficient of thermal expansion (5-8 ppm/K), and low weight (2.9-4.3 g/cc) Cu based metal matrix composite material to produce high performance substrates for microelectronics packaging. The proposed MMC system uses copper as the continuous metal matrix and cubic bor ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. Application of a Novel Micromachining Process to Millimeter Wave Circuit Fabrication

    SBC: MICROFAB (WASVA MILLIMETER WAVE)            Topic: N/A

    MicroFab Research (MFR, Inc.) proposes to apply the techniques of micromachining to aid in the fabrication of millimeter wave components, thereby reducing manufacturing expenses. Many microwave applications such as radar and communication systems would be improved by shifting to higher frequencies, provided new lower cost manufacturing techniques can be found. A manufacturing technique is presente ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. Band-Gap Engineered Varistors

    SBC: Angstrom Devices, Inc.            Topic: N/A

    Solid-state electronic devices are often subjected to high voltage transients generated by switching, lightning, or electrostatic discharge. These transients can cause mission critical components to fail. Varistors are increasingly used to avoid such failures. The current varistor devices, however, are not well suited for high frequency applications and the increasing trend towards device miniatur ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  8. Bonding of Dissimilar Materials Using Pulsed Power

    SBC: UTRON, Inc.            Topic: N/A

    BMDO seeks development of novel low-to-no outgassing joining/bonding techniques for advanced composites. Explosive welding, employing actual chemical explosives, is a versatile process that can be used, in principle, with any two materials. In some situations involving difficult materials, explosive bonding is the only practical joining method. Typically, a layer of explosive is carefully coated o ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Chalcogenide Superconductors

    SBC: Cryopower Associates, Inc.            Topic: N/A

    WE PROPOSE TO SEARCH FOR NEW SUPERCONDUCTORS THAT ARE SIMILAR TO THE PEROVSKITE-BASED HIGH TEMPERATURE SUPERCONDUCTORS (HTS), BUT WITH THE OXYGEN REPLACED BY A CHALCOGEN, THAT IS SULFUR, SELENIUM OR TELLURIUM. WE BELIEVE THAT THE HTS COPPER OXIDES ARE NOT A UNIQUE ACCIDENT OF NATURE, BUT THAT THERE ARE OTHER COMPLEX CHEMICAL COMPOUNDS THAT COULD ALSO BE SUPERCONDUCTING. AN OBVIOUS PLACE TO LOOK WO ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  10. Comprehensible Descriptions for Fast Processing of Image Data

    SBC: DATAMAT SYSTEMS RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government