List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Automated Airborne Measurement of Ozone

    SBC: ADA Technologies, Inc.            Topic: N/A

    Ozone is arguably the most important trace gas in the atmosphere, and improved monitoring of ozone throughout the atmosphere is essential. This Phase 2 project continues the development of a complete, automated system for measuring ozone from on board commercial aircraft. There is already one program within NOAA, CAAMP (Commercial Aircraft Atmospheric Measurement Program), for measuring a variety ...

    SBIR Phase I 1998 Department of Commerce
  2. CHARACTERIZATION OF CONCRETE CONDITION USING ACOUSTIC TOMOGRAPHIC IMAGING

    SBC: Atkinson-noland Assoc. Inc.            Topic: N/A

    RESIDUAL LIFETIME EVALUATION OF EXISTING NUCLEAR FACILITIES REQUIRES DETAILED INFORMATION REGARDING CONDITION OF CONTAINMENT AND SUPPORT STRUCTURES. CURRENT NONDESTRUCTIVE METHODS FOR SUBSURFACE EVALUATION OF REINFORCED CONCRETE USE COMPLEX EQUIPMENT AND RELY HEAVILY ON INTERPRETATION BY THE OPERATOR. A RESEARCH EFFORT IS PROPOSED TO EXAMINE THE USE OF COMPUTERIZED TOMOGRAPHIC IMAGING FOR LOCATING ...

    SBIR Phase II 1994 Nuclear Regulatory Commission
  3. A Standard Lidar Interface for Wind and Aerosol Profiling from Commercial

    SBC: COHERENT TECHNOLOGIES, INC.            Topic: N/A

    Lidar systems offer considerable promise for the acquisition of a variety of atmospheric variables with very high spatial and temporal resolution from airborne platforms. Ground-based lidar systems have been demonstrated that measure aerosols, water vapor, and ozone, and airborne windsensing lidar have been flown on several military aircraft. The growing number of commercial airliners, however, of ...

    SBIR Phase II 1998 Department of Commerce
  4. NO MOVING PARTS RAIN GAUGE

    SBC: THE CORE GROUP, INC.            Topic: N/A

    THE U.S. WEATHER SERVICE PRESENTLY USES A "TIPPING BUCKET" RAIN GAUGE FOR MEASURING RAIN ACCUMULATION. THIS DEVICE IS SENSITIVE TO WIND AND MOTION (AS ON BUOYS), CANNOT MEASURE RAIN RATE, AND REQUIRES FREQUENT MAINTENANCE, BECAUSE OF MOVING PARTS. AN ALTERNATIVE DEVICE IS BEING PROPOSED, WHICH INCORPORATES A RIGID, RESONANT TUBE, CLOSED AT THE TOP BY AN ELECTRO-ACOUSTIC TRANSDUCER, AND AT THE BOTT ...

    SBIR Phase I 1994 Department of Commerce
  5. Analysis Software for Near-Field Optical Microscopes

    SBC: Field Precision            Topic: N/A

    The near-field scanning optical microscope can supply information on the shape and electrical properties of surfaces with nanometer resolution. The quantitative interpretation of images is difficult because of the difficulty of electromagnetic field solutions in the near-field limit. We propose to supply software to aid in this analysis. The finite-element programs generate two and three-dimension ...

    SBIR Phase II 1998 Department of Commerce
  6. FULL CONFORMANCE TEST SUITE FOR CGM: 1992/AMD. 1 MODEL PROFILE

    SBC: Henderson Software Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of Commerce
  7. A Virtual Machining and Inspection System (VMIS)

    SBC: Icamp, Inc.            Topic: N/A

    The purpose of the VMIS is to allow manufacturers the luxury of testing and perfecting manufacturing plans long before a single machine tool is turned on and resources are committed. The VMIS will allow the user to select an available machine tool and an available inspection device, specify a proposed inspection plan and a dimensional analysis procedure, and then build and inspect hundreds (or ev ...

    SBIR Phase II 1996 Department of Commerce
  8. New Methods for Evaluating Thermal Performance of Protective Clothing for

    SBC: KTECH CORP.            Topic: N/A

    A growing number of fire fighters are suffering third degree burns; this has led to questions about the adequacy of thermal protective performance (TPP) measurements for protective clothing. A new heat flux sensor, whose response approximates that of skin, will be developed to provide better measurements of heat transfer in TPP tests. This sensor will be used with nonlinear parameter estimation an ...

    SBIR Phase II 1998 Department of Commerce
  9. Simple Optical Vibration Sensor for Small Objects

    SBC: LIGHTWORKS, LLC            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Commerce
  10. ROBUST DESIGN ENGINEERING WORKSTATION

    SBC: MANAGEMENT SCIENCES INC            Topic: N/A

    MSI PROPOSES TO INCORPORATE BACKGROUND SUBSTITUTION OF "FAULTY MODELS" IN CAD DESIGN SIMULATION OF ELECTRONIC CIRCUITS TO PERFORM A "DESIGN OF EXPRIMENTS" DETERMINATION OF SENSITIVITY TO PARAMETRIC VARIATION IN COMPONENTS. THE INFORMATION LEARNED WILL BE USED TO SELECT COMPONENTS THAT WILL HAVE A LONGER LIFE, AND GREATER DURABILITY. THIS FORM OF ANALYSIS COMBINED WITH WORST CASE SENSITIVITY ANALYS ...

    SBIR Phase I 1994 Department of Commerce

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government