You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Damage Detection in Thick Walled Composites Using Surface Mounted Piezoelectric Elements

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Herein ACX proposes a damage detection system based on ACX's QuickPack+ technology to combine piezoelectric actuators and sensors in a robust, easily mounted transducer package. The QuickPack encapsulates a piezoceramic with insulating flex circuit material and a simple connector. The transducer package will be bonded via a low-melting-point thermoplastic adhesive to ensure removability. The t ...

    SBIR Phase II 1997 Department of DefenseArmy
  2. Damage Detection in Thick Walled Composites Using Surface Mounted Piezoelectric Elements

    SBC: Active Control eXperts, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseArmy
  3. Aided recovery from Visual Loss

    SBC: AMS. Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseArmy
  4. ONE-WAY DOPPLER MEASUREMENT

    SBC: ADCOM SYSTEMS TECHNOLOGY,INC.            Topic: N/A

    INNOVATIVE APPROACHES ARE DESCRIBED IN THIS PROPOSAL FOR SUPPRESSING FREQUENCY MODULATION ON A SINUSOIDAL CARRIER. PARTICULAR EMPHASIS IS DIRECTED TO THE SUPPRESSION OF IDENTIFIABLE COMPONENTS OF A COMPOSITE MODULATION PROCESS FOR THE PURPOSE OF RETAINING, FOR SEPARATE MEASUREMENT, ANY FORM OF RANGE-RATE DOPPLER SHIFT/MODULATION PRESENT. THE PROPOSED EFFORT WILL CONSIST OF AN ANALYTICAL STUDY FOR ...

    SBIR Phase I 1988 Department of DefenseArmy
  5. DIRECT GROWTH/FUSION CIRCUITRY DEVICES ON OPTICAL FIBER

    SBC: Advanced Fiberoptics Corp.            Topic: N/A

    THE OBJECTIVE OF THIS PROJECT IS TO EVALUATE THE FEASIBILITY OF GROWTH OR FUSION OF OPTOELECTRONIC DEVICES DIRECTLY ONTO THE OPTICAL FIBER. THIS APPROACH WILL HAVE SIGNIFICANT IMPLICATION AND BENEFITS ON FUTURE FIBER OPTIC COMMUNICATIONS. TO ACHIEVE THE OBJECTIVE, A COMPLETE LITERATURE SEARCH RELATED TO THE TOPIC WILL BE COMPILED. A THEORETICAL ANALYSIS ON ALL POSSIBLE DESIGNS WILL BE INVESTIGATED ...

    SBIR Phase II 1988 Department of DefenseArmy
  6. WASTE HEAT EXCHANGER FOR DIESEL EXHAUST POWERED AIR CONDITIONING

    SBC: Advanced Mechanical Technology, Inc.            Topic: N/A

    THE WASTE HEAT EXCHANGER IS OFTEN THE LARGEST SINGLE COMPONENT IN DIESEL-EXHAUST POWERED AIR CONDITIONING SYSTEMS, AND ON ACCOUNT OF ITS HIGH MATERIAL CONTENT, IS OFTEN THE HEAVIEST AND MOST COSTLY AS WELL. THE NEED EXISTS FOR A HEAT EXCHANGER DESIGN AND FABRICATION TECHNIQUE WHICH IS COMPACT AND LIGHTWEIGHT, RESISTS FOULING FROM EXHAUST GASES, IS EASILY CLEANED, USES INEXPENSIVE MATERIALS, AND IS ...

    SBIR Phase I 1988 Department of DefenseArmy
  7. Metal Hydride Preheater for M2 Diesel Burner

    SBC: Advanced Mechanical Technology, Inc.            Topic: N/A

    The XA2 gasoline burner is widely used by the military to meet a variety of food preparation and heating requirements in the field. Because of the trend toward an single-fuel Army vehicle fleet and away from gasoline as a general purpose fuel, a diesel/JPS fueled burner is sorely needed. A recently developed catalytic vapor generator together with the proposed metal-hydride preheater should prov ...

    SBIR Phase I 1997 Department of DefenseArmy
  8. PATTERNED ETCHING OF INFRARED DETECTOR ARRAYS

    SBC: Aerodyne Research, Inc.            Topic: N/A

    WE PROPOSE TO DEVELOP A PATTERNED ETCHING TECHNIQUE FOR INFRARED DETECTOR ARRAYS BASED ON PHOTO-INDUCED ETCHING OF HGCDTE THAT IS COMPATIBLE WITH THE ULTRA-HIGH VACUUM ENVIRONMENT OF A MOLECULAR BEAM EPITAXY APPARATUSES. THE PHASE I RESEARCH FOCUSES ON ESTABLISHING THE EFFICACY OF SUITABLE GAS PHASE PRECURSORS FOR THE ETCHING PROCESS. IF THE PHASE I RESEARCH IS SUCCESSFUL, OPTICAL PROJECTION TECHN ...

    SBIR Phase I 1990 Department of DefenseArmy
  9. A COLD FLOW TEST FACILITY FOR IR SUPPRESSORS

    SBC: Aerodyne Research, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseArmy
  10. SATELLITE KILL ASSESSMENT SPECTROSCOPY

    SBC: Aeromet, Inc.            Topic: N/A

    TO MEET THE KINETIC ENERGY ANTI-SATELLITE (KE ASAT) REQUIREMENTS FOR TIMELY AND RELIABLE KILL ASSESSMENT, AEROMET PROPOSES TO RECOMMEND INNOVATIVE TECHNIQUES IN REAL-TIME KILL ASSESSMENT SPECTROSCOPY. BECAUSE IT CAN BE CRITICALLY IMPORTANT TO ACCURATELY VERIFY SATELLITE ELIMINATION, A KILL ASSESSMENT SYSTEM MUST DISCERN BETWEEN VARIOUS HIT AND MISS PHENOMENA, INCLUDING THE USE OF POTENTIAL COUNTER ...

    SBIR Phase I 1990 Department of DefenseArmy
US Flag An Official Website of the United States Government