You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Aluminum Alloy: Extruded Thin Wall Structural Concepts

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The primary objective of this proposed work is to develop a method of producing integrally stiffened, complex shaped monolithic structural components in high strength aluminum alloys at a lower cost and lighter weight than equivalent conventional built-up assemblies. In Phase I the feasibility of attaining this objective will be demonstrated by conducting a series of subscale experiments based upo ...

    SBIR Phase I 1994 Department of DefenseAir Force
  2. Processing of Selectively-Discontinuous-Fiber (SDF) Composite Materials

    SBC: Advanced Composite Operations            Topic: N/A

    This proposal is directed at creating discontinuous unidirectional composite from continuous unidirectional prepreg. The process, Selectively-Discontinuous-Fiber (SDF), introduces micro-cuts in preimpregnated unidirectional materials at specified locations. This process will allow unidirectional composite prepreg to be used for the fabrication of complex-compound components that have be ...

    SBIR Phase I 1996 Department of DefenseAir Force
  3. LIGHT-WEATHER DATABASE FOR REENTRY TECHNOLOGIES

    SBC: Aeromet, Inc.            Topic: N/A

    DEVELOPMENT OF A PLAN AND ITS DEMONSTRATION IN PRODUCING MODERN DATABASE FOR RV TECHNOLOGIES IS PROPOSED BY USING CLOUD MICROPHYSICAL DATA SETS COLLECTED SINCE 1985 OVER THE NORTH AMERICAN CONTINENT AND U.S. ARMY KWAJALEIN ATOLL. THE PLAN INCLUDES THE USE OF AIRBORNE RADAR, MODELING, AND SATELLITE ADDITIONS TO THE PARTICLE SIZE DATA TO CORRELATE PARTICLE SIZE AND LIQUID WATER CONTENT OVER AN EXTEN ...

    SBIR Phase I 1990 Department of DefenseAir Force
  4. DESIGN OF A STAR HYPERVELOCITY EML SYSTEM FOR AIR FORCE REQUIREMENTS

    SBC: American Advanced Technologies            Topic: N/A

    THE WORK PROPOSED WILL RESULT IN A COMPLETE, PRELIMINARY SYSTEM DESIGN OF AN ELECTROMAGNETIC PROJECTILE LAUNCHER, BASED ON THE STAR EML CONCEPT DEVELOPED BY AMERICAN ADVANCED TECHNOLOGIES. THE COMPLETED DESIGN WILL PERMIT THE AIR FORCE TO COMPARE THE PERFORMANCE, WEIGHT AND SIZE OF THE STAR EML WITH OTHER CONCEPTS BEING INVESTIGATED. THE STAR EML SYSTEM IS OF INTEREST TO THE AIR FORCE BECAUSE THE ...

    SBIR Phase I 1988 Department of DefenseAir Force
  5. Evaluation of Analog Interface for Dosimetry Temperature Probes

    SBC: Automated Instruments            Topic: N/A

    Measuring temperature in specimens being heated by electromagnetic energy requires the use of special probes. The temperature probes must be specially designed to minimize electromagnetic field perturbations. Several types of non-perturbing temperature measurement probes have been investigated and developed. Many employ optical fibers rather than electrical conductors to avoid the e ...

    SBIR Phase I 1996 Department of DefenseAir Force
  6. Low Cost Curing and Repair Process for Composites

    SBC: ADVANCED PROCESSING TECHNOLOGY, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  7. Fiber Optic Raman Sensors for the Remote Determination of Composite Chemical Characteristics

    SBC: ADVANCED PROCESSING TECHNOLOGY, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  8. REACTIVE PROTECTION FOR HARDENED FACILITIES

    SBC: BAKER ENGINEERING AND RISK CONSULTANTS, INC.            Topic: N/A

    THREE CONCEPTS ARE PROPOSED FOR REACTIVE PROTECTIVE SYSTEMS FOR ABOVE-GROUND HARDENED STRUCTURES. THESE AND OTHER CONCEPTS WOULD BE EVALUATED FOR THEIR EFFECTIVENESS IN DEFEATING OR SERIOUSLY DEGRADING THE TERMINAL BALLISTIC PERFORMANCE OF A VARIETY OF CONVENTIONAL MUNITIONS WHICH COULD BE USED TO ATTACK AND DIRECTLY IMPACT HARDENED STRUCTURES. APPROXIMATE COST COMPARISONS WOULD BE MADE BETWEEN CO ...

    SBIR Phase I 1988 Department of DefenseAir Force
  9. DALM Personal Radio Frequency Radiation Dosimetry System

    SBC: Beam Tech Corp.            Topic: N/A

    Beam Technology Corporation is prepared to develop an innovative personal Radio frequency Radiation Dosimeter based on concepts originally enunciated by Dr. Johnathan Kiel, The approach will use a technology that promises to be much more versatile than currently available methods of measurement, which often employ E-field probes and meters. The objective is to use a novel chemical, Diazoluminomel ...

    SBIR Phase I 1997 Department of DefenseAir Force
  10. A Design Improvement Study for the CFTF Centrifuge

    SBC: Biodynamic Research Corporation            Topic: N/A

    The CFTF Centrifuge at Armstrong Laboratory will be a useful tool for crewmember training and human factors research for future high performance aircraft. The centrifuge features an accelearation of performance that is unmatched by other Air Force facilities, however, it lacks a set of powered gimbals that would allow positioning of the rider with respect to acceleration. With these additional d ...

    SBIR Phase I 1997 Department of DefenseAir Force
US Flag An Official Website of the United States Government