You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. A HIGH RESOLUTION CDTE ARRAY MONITORING SYSTEM FOR MONITORING CONTAMINATION IN SOILS

    SBC: Radiation Safety Engineering, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Nuclear Regulatory Commission
  2. Airborne Imaging LIDAR for Biomass Estimation

    SBC: Arete Associates            Topic: N/A

    There is a need for accurate and cost effective airborne techniques to estimate fish biomass in the open ocean. Arete proposes to develop in Phase I optimal detection algorithms using existing imaging LIDAR data collected with the Fisheye(R) sensor. These algorithms will be developed to allow real-time detection of fish and fish schools, discrimination between fish and ambient clutter, and discr ...

    SBIR Phase I 1995 Department of Commerce
  3. Algorithms for Health Care Quality Management and Outcomes Assessment

    SBC: BARRON ASSOCIATES, INC.            Topic: N/A

    American health care is in the midst of momentous change. Quality improvement principles are being used increasingly to enhance productivity and efficiency of health care delivery and to help contain costs. In producing patient outcomes and resource utilization measures, it is vital to control appropriately for case mix (i.e., differences in patients due, e.g., to illness severity) in the predicti ...

    SBIR Phase I 1997 Department of Commerce
  4. AN ASSESSMENT AND TEACHING TOOL FOR NATIONAL EDUCATION GOALS

    SBC: Research Development Corporation            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of Commerce
  5. AN YTTRIUM ALUMINUM PEROVSKITE BASED GAMMA-RAY DOSIMETER

    SBC: W Peter Trower Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Nuclear Regulatory Commission
  6. A Ruggedized System for Measuring Extreme Winds

    SBC: Caregiver Technologies, Inc.            Topic: N/A

    We will develop technology, termed a Ruggedized Wind Measurement System (RWMS), to measure directly extreme winds with high space and time resolution, focusing on the winds that occur beneath hurricanes at land fall. This development effort will include design, fabrication of two prototype RWMS units, and a series of proof-of-concept demonstrations in strong mountain-induced downslope and severe t ...

    SBIR Phase I 1997 Department of Commerce
  7. ASSESSING AND INCREASING THE TESTABILITY OF OBJECT-ORIENTED SOFTWARE

    SBC: Cigital, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of Commerce
  8. Automated Support for Domain Engineering and System Construction

    SBC: Reuse, Inc.            Topic: N/A

    Domain modeling and automated software construction offers significant potential for rapidly producing high quality software systems within many application domains, specially in mature and stable application domains where many variations of similar systems are generated. There is now a clear opportunity to leverage off the work that has already been done in constructing domain-engineering suppor ...

    SBIR Phase I 1995 Department of Commerce
  9. CAD of Non-linear Optical Properties of Thin-film Structures

    SBC: Autometric Inc.            Topic: N/A

    This proposal addresses development of CAD software for simulating non-linear optical materials. The software will provide a virtual lab in which experimental setups are simulated. The proposed software is based on the use of a Maxwell differential equation solver, the Finite Difference Time Domain (FDTD) method. This numerical method has been developed by numerous researchers since 1968 and no ...

    SBIR Phase I 1995 Department of Commerce
  10. Characterization of Consolidation of Non-Spherical Powders

    SBC: Matsys Incorporated            Topic: N/A

    We propose to characterize the early stage of consolidation of non-spherical powders to further the development of process models to enable simulation of powder metallurgy manufacturing for the consumer market, especially the automotive industry. Typically, spherical powders with a narrow size distribution are used for aerospace applications, while low-cost powders with irregular shapes and a wide ...

    SBIR Phase I 1997 Department of Commerce
US Flag An Official Website of the United States Government