You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Actuation for Compressor Surge Allevation and Stall Line Management

    SBC: Scientific Monitoring, Inc.            Topic: N/A

    Control systems that stabilize the operation of a compressor around the surge line have been demonstrated in controlled laboratory conditions on fixed speed compressors. Jet engine manufacturers are considering this technology for improving engine performance and operability by reducing the compressor surge margins that are currently built into engine control logic. To demonstrate this technolog ...

    SBIR Phase I 1996 Department of DefenseArmy
  2. Advanced Materials for Ultralight PEM Fuel Cell Applications

    SBC: ATS-MER, LLC            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseArmy
  3. A High Density Liquid Hydride Based Hydrogen Storage System

    SBC: ATS-MER, LLC            Topic: N/A

    A liquid chemical hydride-based hydrogen storage system is proposed for high density hydrogen supply for fuel cell power generation applications. Research works performed at MER showed that certain liquid hydrides can be catalytically dehydrogenated at temperatures as low as 150¿C. The released hydrogen gas can be withdrawn from the system through a hydrogen permeable membrane to achieve comple ...

    SBIR Phase I 1997 Department of DefenseArmy
  4. A HIGH RESOLUTION CDTE ARRAY MONITORING SYSTEM FOR MONITORING CONTAMINATION IN SOILS

    SBC: Radiation Safety Engineering, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Nuclear Regulatory Commission
  5. Air Release Valve and Control for Airbags

    SBC: Warrick & Assoc., Inc.            Topic: N/A

    An air pressure relief valve for airbags is described that has high frequency response owing to its low inertial mass. It is able to open to expose up to 2 square feet of exhaust area within .010 second, thus achieving optimum energy management. The relief valve operation is passive; it is opened and closed by variation of air pressure within the airbag, rather than any external power source. T ...

    SBIR Phase I 1997 Department of DefenseArmy
  6. An Advanced Ceramic Heat Recuperator for Vehicular Application

    SBC: CERONE, INC.            Topic: N/A

    An advanced ceramic heat recuperator (ACHR) incorporates thin corrugated,d triangular-shaped flow channels made of non-oxide ceramics with high thermal conductivity and high fracture toughness. A counterflow arrangement together with the unique design of the flow channels makes the ACHR highly efficient, highly reliable and compact. A key processing innovation is also made for fabrication of the ...

    SBIR Phase I 1995 Department of DefenseArmy
  7. An Advanced Integrated Electric Wheel Motor and Hydraulic Suspension System for High-Mobility Scout Ground Vehicle

    SBC: NEW GENERATION MOTORS CORP.            Topic: N/A

    Military scout vehicles and commercial sports utility vehicles share the common need for advanced suspension/drive systems that offer robustness over widely varying terrain. The ultimate system for handling, ride isolation, and stability control would incorporate high efficiency electric motors independently driving the four wheels, with one on-board high-level computer for controlling the active ...

    SBIR Phase I 1997 Department of DefenseArmy
  8. A Novel, Inexpensive approach to Inertial Guidance for Gun Launched Projectiles

    SBC: S. Adelman Associates            Topic: N/A

    The notion of using an inexpensive inertial augmentation system for a tube launched ordnance, either with or without a terminal homing sensor, has existed for some time now. The main drawback has been the high cost associated with reliable inertial components and the hardening problem with gyroscopes or other rate sensing elements. Some of the solutions that have been proposed to date attempt to ...

    SBIR Phase I 1995 Department of DefenseArmy
  9. A Novel Non-Lethal Effects Device

    SBC: Adroit Systems, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseArmy
  10. AN YTTRIUM ALUMINUM PEROVSKITE BASED GAMMA-RAY DOSIMETER

    SBC: W Peter Trower Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Nuclear Regulatory Commission
US Flag An Official Website of the United States Government