You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Active Suppression of Thruster Induced Seeker Jitter Using Electro-
SBC: PROPULSION RESEARCH, INC. Topic: N/ASEEKER STABILIZATION VIBRATION SUPPRESSION ELECTRO-ACTIVE MATERIALS PROPULSION RESEARCH WILL USE ITS MINIATURE "FERRO-MAGNETIC" ACTUATOR EFFORTD CAN BE USED TO CREATE A "SEEKER ANTI-MOTION SYSTEM". THIS TECHNOLOGY TAKES AN AGGRESSIVE APPROACH TOWARD "INTELLIGENTLY" MANAGING THE SEEKER DYNAMIC RESPONSE TO INDUCED MOTION BY ISOLATING IT "DYNAMICALLY" FROM THE REAMINDER OF THE AIRFRAME USING ELECTRO- ...
SBIR Phase I 1994 Department of DefenseMissile Defense Agency -
Advanced Projectile Diverters for Strategic Defense and Theater Missile Defense Miniature Interceptor Applications
SBC: Tg&c Assoc., Inc. Topic: N/AThis proposal addresses the exploratory development and evaluation of novel thin film and/or monolithic detonators as diverters for guided spinning projectile use. A number of such detonators comprise a diverter technology termed RMDM, (for Ring Matrix Diverter Module) which, along with the SSPG (for Small Spinning Projectile Guidance) seeker, forms the basis for inexpensive miniature guided proje ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
A HIGH RESOLUTION CDTE ARRAY MONITORING SYSTEM FOR MONITORING CONTAMINATION IN SOILS
SBC: Radiation Safety Engineering, Inc. Topic: N/AN/A
SBIR Phase I 1994 Nuclear Regulatory Commission -
A Novel High Thermal Conductivity, Low CTE, Low Weight MMC Substrate for Microelectronics Packaging
SBC: ATS-MER, LLC Topic: N/AThis Small Business Innovation Research Phase I program proposes the development of a high thermal conductivity (470-550 W/mK), low coefficient of thermal expansion (5-8 ppm/K), and low weight (2.9-4.3 g/cc) Cu based metal matrix composite material to produce high performance substrates for microelectronics packaging. The proposed MMC system uses copper as the continuous metal matrix and cubic bor ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
AN YTTRIUM ALUMINUM PEROVSKITE BASED GAMMA-RAY DOSIMETER
SBC: W Peter Trower Inc. Topic: N/AN/A
SBIR Phase I 1994 Nuclear Regulatory Commission -
Application of a Novel Micromachining Process to Millimeter Wave Circuit Fabrication
SBC: MICROFAB (WASVA MILLIMETER WAVE) Topic: N/AMicroFab Research (MFR, Inc.) proposes to apply the techniques of micromachining to aid in the fabrication of millimeter wave components, thereby reducing manufacturing expenses. Many microwave applications such as radar and communication systems would be improved by shifting to higher frequencies, provided new lower cost manufacturing techniques can be found. A manufacturing technique is presente ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Band-Gap Engineered Varistors
SBC: Angstrom Devices, Inc. Topic: N/ASolid-state electronic devices are often subjected to high voltage transients generated by switching, lightning, or electrostatic discharge. These transients can cause mission critical components to fail. Varistors are increasingly used to avoid such failures. The current varistor devices, however, are not well suited for high frequency applications and the increasing trend towards device miniatur ...
SBIR Phase I 1996 Department of DefenseMissile Defense Agency -
Bonding of Dissimilar Materials Using Pulsed Power
SBC: UTRON, Inc. Topic: N/ABMDO seeks development of novel low-to-no outgassing joining/bonding techniques for advanced composites. Explosive welding, employing actual chemical explosives, is a versatile process that can be used, in principle, with any two materials. In some situations involving difficult materials, explosive bonding is the only practical joining method. Typically, a layer of explosive is carefully coated o ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Comprehensible Descriptions for Fast Processing of Image Data
SBC: DATAMAT SYSTEMS RESEARCH, INC. Topic: N/AN/A
SBIR Phase I 1996 Department of DefenseMissile Defense Agency -
Computer Architecture, Algorithms, Models and Simulations
SBC: INFORMATION SYSTEMS LABORATORIES INC Topic: N/AReconfigurable computing architectures based on Field Programmable Gate Arrays (FPGAs) offer extaordinary real time processing rates in inexpensive programmable hardware. The key to using FPGAs for reconfigurable computing is to reformulate algorithms in terms of parallel operations that are easily implemented with chains of simple processing elements. Currently available commercial integrated cir ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency