Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Active Suppression of Thruster Induced Seeker Jitter Using Electro-

    SBC: PROPULSION RESEARCH, INC.            Topic: N/A

    SEEKER STABILIZATION VIBRATION SUPPRESSION ELECTRO-ACTIVE MATERIALS PROPULSION RESEARCH WILL USE ITS MINIATURE "FERRO-MAGNETIC" ACTUATOR EFFORTD CAN BE USED TO CREATE A "SEEKER ANTI-MOTION SYSTEM". THIS TECHNOLOGY TAKES AN AGGRESSIVE APPROACH TOWARD "INTELLIGENTLY" MANAGING THE SEEKER DYNAMIC RESPONSE TO INDUCED MOTION BY ISOLATING IT "DYNAMICALLY" FROM THE REAMINDER OF THE AIRFRAME USING ELECTRO- ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  2. Advanced Projectile Diverters for Strategic Defense and Theater Missile Defense Miniature Interceptor Applications

    SBC: Tg&c Assoc., Inc.            Topic: N/A

    This proposal addresses the exploratory development and evaluation of novel thin film and/or monolithic detonators as diverters for guided spinning projectile use. A number of such detonators comprise a diverter technology termed RMDM, (for Ring Matrix Diverter Module) which, along with the SSPG (for Small Spinning Projectile Guidance) seeker, forms the basis for inexpensive miniature guided proje ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. AN YTTRIUM ALUMINUM PEROVSKITE BASED GAMMA-RAY DOSIMETER

    SBC: W Peter Trower Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Nuclear Regulatory Commission
  4. Application of a Novel Micromachining Process to Millimeter Wave Circuit Fabrication

    SBC: MICROFAB (WASVA MILLIMETER WAVE)            Topic: N/A

    MicroFab Research (MFR, Inc.) proposes to apply the techniques of micromachining to aid in the fabrication of millimeter wave components, thereby reducing manufacturing expenses. Many microwave applications such as radar and communication systems would be improved by shifting to higher frequencies, provided new lower cost manufacturing techniques can be found. A manufacturing technique is presente ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  5. Bonding of Dissimilar Materials Using Pulsed Power

    SBC: UTRON, Inc.            Topic: N/A

    BMDO seeks development of novel low-to-no outgassing joining/bonding techniques for advanced composites. Explosive welding, employing actual chemical explosives, is a versatile process that can be used, in principle, with any two materials. In some situations involving difficult materials, explosive bonding is the only practical joining method. Typically, a layer of explosive is carefully coated o ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. Comprehensible Descriptions for Fast Processing of Image Data

    SBC: DATAMAT SYSTEMS RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  7. Computer Architecture, Algorithms, Models and Simulations

    SBC: Information Systems Laboratories, Inc.            Topic: N/A

    Reconfigurable computing architectures based on Field Programmable Gate Arrays (FPGAs) offer extaordinary real time processing rates in inexpensive programmable hardware. The key to using FPGAs for reconfigurable computing is to reformulate algorithms in terms of parallel operations that are easily implemented with chains of simple processing elements. Currently available commercial integrated cir ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. Development of a Compact Electron Beam Accelerator

    SBC: MICROWAVE TECHNOLGIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Dynamic Consolidation of Powders for Very Large Components

    SBC: UTRON, Inc.            Topic: N/A

    BMDO seeks development of novel methods to cut tabrication cost of metallic spacecraft and interceptor structures. UTRON proposes to develop an innovative rapid powder consolidation technique called Combustion Driven Dynamic Consolidation (CDDC) to consolidate metal (and other) powders. This technique is versatile and can be applied to various material systems such as metal and alloy powders, inte ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Frequency-Doubling Millimeter-Wave Amplifier

    SBC: MICROWAVE TECHNOLGIES, INC.            Topic: N/A

    We propose the experimental investigation of a frequency-doubling millimeter-wave amplifier (MWA) that has diverse applications such as short-wavelength radiation sources for sensors and associated systems. The MWA is proposed as a very compact, light-weight RF source in which an electron beam is injected into a deflection cavity operating at the drive frequency. A transverse magnetic field produc ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government