You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
INFRARED SENSOR AND IMAGING SYSTEM
SBC: EMPIRICAL TECHNOLOGIES CORPORATION Topic: N/AN/A
SBIR Phase I 1988 Department of DefenseMissile Defense Agency -
Development of a Performance Assessment Process Controller
SBC: Innovative Tech. Solutions Topic: N/AN/A
SBIR Phase I 1995 Nuclear Regulatory Commission -
LASER ALLOYING OF PLASMA-DEPOSITED COATINGS FOR PROTECTION AGAINST ATOMIC OXYGEN
SBC: American Research Corporation of Virginia Topic: N/AN/A
SBIR Phase I 1988 Department of DefenseMissile Defense Agency -
VALIDATION & TESTING OF THE VAM2D COMPUTER CODE
SBC: Hydrogeologic Inc. Topic: N/AN/A
SBIR Phase I 1988 Nuclear Regulatory Commission -
MICRO COMPUTER BASED PARALLEL PROCESSING SYSTEM FOR CODE COMPUTATIONS
SBC: Risk Management Systems Topic: N/AN/A
SBIR Phase I 1988 Nuclear Regulatory Commission -
Ultrafine HfC/TaC for Rocket Thrusters
SBC: MATERIALS MODIFICATIONS INC Topic: N/ALiquid rocket engine performance can be dramatically improved by increasing the wall temperatures for operation concurrent with a reduction in the component weight. The bipropellant fuel combustion temperatures are between 3000 "approx" 3500 C. The conventional thrusters and exit nozzles made of niobium alloys have a maximum operating temperature limit of 1600 C. A regenerative cooling technolo ...
SBIR Phase I 1996 Department of DefenseMissile Defense Agency -
High Resolution Holographic Target Tracking Sensor
SBC: HOLOGRAPHIC OPTICS, INC. Topic: N/AOptical and infrared sensors usually track the target by measuring the spatial position of a focal spot on the matrix of detectors. Range and resolution are dependent on the quality of the optics and on the complexity of the electronics (number of detectors in the matrix, their sensitivity etc). Cost is also related to these parameters and might increase exponentially with high performance systems ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Ultrafine SiC for Optical Mirrors
SBC: MATERIALS MODIFICATIONS INC Topic: N/ASiC has exceptionally high thermal conductivity and low linear expansion coefficient to resist thermal distortion, high elastic modulus to resist pressure and bowing distortion. It is lightweight and wear resistant. It also has excellent corrosion resistance and outstanding load bearing characteristics at elevated temperatures. Its hardness is only surpassed by diamond, CBN and boron carbide. As ...
SBIR Phase I 1996 Department of DefenseMissile Defense Agency -
Chiral Film Technology for Ultrahigh-Capacity & Ultrafast Retrieval Optical Storage
SBC: REVEO, INC. Topic: N/AN/A
SBIR Phase I 1996 Department of DefenseMissile Defense Agency -
Next Generation Electronic Materials For Electro-Optic Modulators
SBC: REVEO, INC. Topic: N/AMany opto-electronic systems require the modulation of optical radiation. In particular, the modulation of light is essential to optical communications systems, detectors, and sensors for many missile defense applications. This modulation is typically accomplished electro-optically. Traditional materials used to bring about the modulation often have slow response times or require high voltages. In ...
SBIR Phase I 1995 Department of DefenseMissile Defense Agency
