You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. Development of a Low Toxicity Treatment for Zebra Mussels

    SBC: Pharmacognetics, Inc.            Topic: N/A

    Zebra mussels cause an estimated $5 billion in economic damages annually. They clog water intake pipes, damage water supplies, threaten native fish and aquatic species, and promote the mobilization of toxic materials into the food chain. Chlorination is presently the most common treatment for zebra mussels. However, chlorine causes many serious environmental risks, thus necessitating the develo ...

    SBIR Phase I 1997 Environmental Protection Agency
  3. Silica Materials for Mercury Recovery From Wastewater

    SBC: TPL, INC            Topic: N/A

    A number of industrial processes generate wastewater with mercury contamination. Existing cleanup processes have difficulties in achieving low mercury discharge limits, especially in the presence of competing metal ions already below their discharge limits. Commercial ion exchange media are not selective for mercury, so other metal ions compete with mercury for binding sites. Consequently, excess ...

    SBIR Phase I 1997 Environmental Protection Agency
  4. Development of a Multianalyte Biosensor Instrument

    SBC: Ergopedia, Inc.            Topic: N/A

    This Phase I project will develop a multianalyte biosensor field screening instrument (MBFI). The MBFI has the potential to reduce the annual cost of environmental analyses in the United States by more than $20 million and to reduce the analysis turnaround time from approximately 19 days to less than 15 minutes. The major barrier to the development of a biosensor instrument for environmental mea ...

    SBIR Phase I 1997 Environmental Protection Agency
  5. An Innovative Photocatalytic Process for Silver Recovery

    SBC: Wangtec Inc.            Topic: N/A

    The photographic industry consumes about 70 million troy ounces of silver annually. The technology used to recover the silver from concentrated solution is more than 40 years old. However, investigators project that, based on industry experience, as much as 20% of this silver is lost in the wash water and goes unrecovered. The toxicity of silver in the effluent is a growing concern in the United ...

    SBIR Phase I 1997 Environmental Protection Agency
  6. Optimization of Cryogenic Power Switching Devices

    SBC: Hmj Corp.            Topic: N/A

    The innovative approach of operating power electronics in a crvogenic environment depends criticallv on the availabilitx of controllable semiconductor switches capable of high efficiency operation in the temperature range from about 20 K to 150 K. Thc motivation for developing this type of pouer electronics is to realize highly efficient and compact svstems with significantl! improved power/mass r ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. A NEAR-INFRARED DIODE LASER-BASED CONTINUOUS EMISSIONS MONITOR FOR NITROGEN OXIDES

    SBC: SOUTHWEST SCIENCES INC            Topic: N/A

    This project addresses the development of diode-laser-based continuous-emissionsmonitors (CEMs) to meet the emissions monitoring requirements imposed on a widerange of industries by Federal and state clean air regulations. The overridingobjective is the development of new, highly reliably instrumentation that hassubstantially lower long term operating and maintenance costs than existinginstrument ...

    SBIR Phase I 1995 Environmental Protection Agency
  8. Solid-State Spray Forming of Near-Net-Shape Structural Materials

    SBC: INNOVATIVE TECHNOLOGY INC            Topic: N/A

    The objective of this research is to demonstrate the feasibility of spray forming aluminum Metal Matrix Composites (MMC) in the solid-state physical form as a light weight structural material. It is anticipated that this innovative manufacturing process will provide opportunities to fabricate near-net-shape spacecraft and interceptor structures with unique material properties. The process called S ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Object-Oriented Hierarchical Tool for Large-Scale Development

    SBC: MZA ASSOCIATES CORP            Topic: N/A

    We propose to develop a novel and ambitious tool for large-scale development: a fourth-generation computer language (4GL) based upon an object-oriented generalization of the hierarchical block diagram paradigm, with powerful integrated simulation capabilities. Developers would assemble a prototype in a connect-the-blocks visual programming environment, test and evaluate it via simulation, then ite ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  10. High Performance Fault Tolerant Missile Control System

    SBC: Intelligent Automation, Inc.            Topic: N/A

    Future missiles will be required to handle many diverse missions. These missions will require increased speed, precision, and survivability under a wider variety of flight conditions than current missiles. Therefore the role of modern flight control systems (FCS) must be expanded well beyond the traditional functions of augmenting stability and controllability with very limited control authority. ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government