You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Innovative Power Module

    SBC: Abi            Topic: N/A

    At the end of Phase I, ABI will deliver a working "subscale" power module which runs on diesel fuel and has an output of approximately 25 horsepower at 3600 RPM. The overall size, exclusive of fuel pump, cooling, and 011 tank, will be approximately the size and shape of a roll of kitchen paper towels, about 15 cm diameter and less than 40 cm long, and less that 20 lbs. weight. Phase II will develo ...

    SBIR Phase I 1993 Department of DefenseNavy
  2. SVD-Based Detection of Internal Waves in SAR Irmgery

    SBC: Adaptive Software, Inc.            Topic: N/A

    Although satellite-based SAR is sensitive enough to pick up the modulation effects of internal waves, the signal-to-noise ratio (SNR) of th-Ls observable is believed to be to() low to afford detection of enemy sukuiarines . Adaptive Software prolses that with a new interpretation of singular value decomposition, the SNR can be improved enough to allow automated detection of sukfmrine paths. While ...

    SBIR Phase I 1992 Department of DefenseNavy
  3. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  4. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  5. Adhesive Bond Integrity of Composites

    SBC: Adler Consultants, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseNavy
  6. MATRIX-ADDRESSABLE LIQUID CRYSTAL DISPLAYS FOR VISUAL LANDING AIDS

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The objective of this project is to use the newest advance in the technology of Ferroelctric Liquid Crystal (FLC) displays so that they can be used for Visual Landing Aids as well as other applications. Currently FLC's suffer from serious mechanical and temperature limitations due to the fact that mechanical stress alters the structure of the liquid crystal material. We propose to stabilize the ce ...

    SBIR Phase I 1993 Department of DefenseNavy
  7. Development of a Low Cost Technique for the Fabrication of HfC/C-fiber Composites for Propulsion Systems

    SBC: Sensintel Inc.            Topic: N/A

    The goal of this program is to develop a low cost, flexible manufacturing method for the production of Cf reinforced composites for ablation-resistant propulsion components for Theater Missile Defense (TMD) concepts. The matrix material selected for demonstration of the technology will be HfC, a material which has demonstrated good oxidation and ablation resistance at elevated temperatures.

    SBIR Phase I 1997 Department of DefenseNavy
  8. Development of an interactive virtual environment simulator for vertical aircraft signal training

    SBC: Aeromed Software, L.l.c.            Topic: N/A

    AeroMed Software, L.L.C., proposes to develop an interactive virtual environment simulator for vertical aircraft signal training. The proposed system is intended to provide Landing Signal Enlisted (LSE) trainees with a dynamic training device similar to the operational flight trainers used by aviators. Recent advances in data acquisition, signal processing and graphics software, computer process ...

    SBIR Phase I 1996 Department of DefenseNavy
  9. Non-Toxic Coating to Replace the Cadmium Coating Used on Naval Fasteners- Zinc-Based Coating Alloy Development Program

    SBC: Amalgamated Technologies Inc.            Topic: N/A

    1The most important reason for reduction and subsequent elimiantion of cadmuim coating in fasteners is the high potential health hazard. Industry is eliminating this metal from usage where ever possible. A family of zinc based alloys has shown favor for replacement. Binary systems with several other elemental additions have been investigated by workers in the plating field and found to be credible ...

    SBIR Phase I 1992 Department of DefenseNavy
  10. Software Tools for Analysis and Design of Conformal Antennas

    SBC: Applied EM Inc.            Topic: N/A

    The growing reliance on wireless electronic systems presents us with a need for new diversity antennas for civilian and military platforms. These antennas must take account of platform curvature, material treatments and nearby interactions, all of which affect the antenna performance. To support the development and design of these antennas, a new generation of analysis is required which retains ...

    SBIR Phase I 1997 Department of DefenseNavy
US Flag An Official Website of the United States Government