You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Nitride, Carbide and Non-Oxide In Situ Coatings Using RECVD,A New CVD Method

    SBC: CCVD, Inc dba MicroCoating Technologies (MCT)            Topic: N/A

    Currently, thermal spray (flame and plasma spray) is the only single step method of applying most metal and non-oxide ceramic coatings to large objects. These coatings are usually of a low quality, and thin films cannot be applied. An in situ deposition technique that inexpensively and easily applies nitrides, carbides and other non-oxide thin or thick films in an environmentally friendly manner i ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. Production Friendly GaN Coatings Using RECVD, a New CVD Method

    SBC: CCVD, Inc dba MicroCoating Technologies (MCT)            Topic: N/A

    Currently vacuum based methods of PVD and CVD are the only processes for forming GaN thin films and coatings. These methods are usually expensive and are not applied in a production friendly manner. An atmospheric deposition technique that inexpensively and easily applies GaN thin or thick films in an environmentally friendly manner is a priority for any number of DOD and commercial applications. ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. Powder Synthesis and Bulk Crystal Growth of Gallium Nitride

    SBC: CERMET, INC.            Topic: N/A

    The primary goal of Phase I work is to demonstrate the feasibility of synthesizing gallium nitride (GaN) powder. Secondarily, this powder will be used to grow high-purity single crystals of GaN from a liquid GaN phase. This would be accomplished using a proprietary variation of the skull melting technique. Since GaN demonstrates peritectic-type decomposition at atmospheric pressure, the entire sku ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. Development of a Performance Assessment Process Controller

    SBC: Innovative Tech. Solutions            Topic: N/A

    N/A

    SBIR Phase I 1995 Nuclear Regulatory Commission
  5. Ultraspectral Imager

    SBC: Kestrel Corporation            Topic: N/A

    This Phase I SBIR demonstrates the underlying technology required to construct an ultraspectral imager that has the ability to spectrally resolve molecular absorption lines while simultaneously creating a two dimensional spatial mapping. The proposed instrument will have a spectral resolution that is better than 2 cm-1 and two dimensional spatial resolution that exceeds 2 milliradian. Based on Fou ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  6. ELECTROMAGNETIC ENVIRONMENTAL EFFECTS WITHIN A NUCLEAR POWER PLANT

    SBC: MISSION RESEARCH CORP.            Topic: N/A

    MRC PROPOSES TO DEVELOP A SAFETY PERFORMANCE INDICATOR (PI) OF THE ELECTROMAGNETIC (EM) PROTECTION STATUS OF A NUCLEAR POWER PLANT (NPP). WE BELIEVE THAT SUCH A PI IS NEEDED BECAUSE: (1) EM ENVIRONMENTAL POLLUTION IS ON THE INCREASE,(2) ADDITIONAL EM THREATS MUST BE EVALUATED, AND (3) DISRUPTION OF NPP OPERATIONS BY EM EFFECTS CAN AND MUST BE AVOIDED. PREVIOUS STUDIES HAVE ADDRESSED THE ISSUE OF E ...

    SBIR Phase I 1990 Nuclear Regulatory Commission
  7. CROSSED-FIELD WIGGLER

    SBC: MISSION RESEARCH CORP.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseMissile Defense Agency
  8. Object-Oriented Hierarchical Tool for Large-Scale Development

    SBC: MZA Associates Corporation            Topic: N/A

    We propose to develop a novel and ambitious tool for large-scale development: a fourth-generation computer language (4GL) based upon an object-oriented generalization of the hierarchical block diagram paradigm, with powerful integrated simulation capabilities. Developers would assemble a prototype in a connect-the-blocks visual programming environment, test and evaluate it via simulation, then ite ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  9. Advanced Metal Powder Manufacture for MLCC Applications

    SBC: NANOCHEM RESEARCH, INC.            Topic: N/A

    Sensors, capacitors, and conducting features such as resistors and capacitors on circuit boards are produced from metal and ceramic powders 1-12 These powders are manufactured by liquid phase precipitation routes which often start with reduction of metal salts or by solid-state routes where solid reactants are mixed, heated and then milled. The solid-state processing is generally repeated several ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government