You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Optical Link for Cryogenic FPA Readout Using Si Circuitry and Thin Film Emitters, Detectors, and Modulators

    SBC: Abj Integration Technologies,            Topic: N/A

    Standard Digital CMOS silicon circuits will have high quality Thin Film emitters, and modulators integrated on to the silicon using epitaxial liftoff and results in low cost opto-electronics in the near future. ABJ Integration is a leader in the field and proposes to design an optimized FPA readout system using this technology. Both emitters and modulators as signal sources will be investigated.

    SBIR Phase I 1995 Department of DefenseArmy
  2. Optoelectronic Packaging for Through-Substrate Communications

    SBC: Abj Integration Technologies,            Topic: N/A

    ABJ Integration Technologies, Inc. proposes to model a vertically optically interconnected stack of silicon integrated circuits to form a three dimensional system. This 3D system will utilize through-substrate optoelectronic communication to which the package and silicon are optically transparent. System optimization for user specifications will include materials and components such as emitters ...

    SBIR Phase I 1997 Department of DefenseArmy
  3. Intelligent Flexible Fixturing System

    SBC: ACT Research Corporation            Topic: N/A

    Two approaches are proposed to attack the problems of fixturing process. First, a novel hardware holding system, Dexterous Vise, is proposed. Functionally, a single Dexterous Vise is capable of revealing four faces of the clamped workpiece to the cutting tool without re-fixturing, which actually increases one degree of freedom to the machine tool. A pair of Dexterous Vises, the "Dual-Vise", ena ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Buffet Control of the F-22 Using an Enhanced Distributed Actuation System

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Unsteady buffet forces excite the vertical tails of aircraft flying at high angles of attack and cause excessive stress and vibration in the tail structure. This results in increased fatigue which ultimately reduces aircraft life. It has been shown by ACX that distributed piezoceramics can significantly reduce the buffet loads on the tail structure of an F/A-18. ACX proposes to develop a simila ...

    SBIR Phase I 1997 Department of DefenseAir Force
  5. Smart, Compact Packages for Vibration Control

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Herein, ACX proposes to develop compact, low cost, integrated smart packs for vibration reduction. Each package would include actuators and sensors, drive and signal conditioning electronics as well as simple controllers to yield a self standing solution to vibration problems. The electronics module would be low cost and compact. The pack would run off of standard available power supplies and w ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  6. High Performance Piezoceramic Coatings for Ultrasound Applications

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes an innovative new process for the manufacture of smart structures using a High Velocity Oxy-Fuel (HVOF) thermal spray process. This simple, multi-step process will be capable of depositing electroded piezoceramic coatings. The coatings will be poled while still hot, reducing poling times and voltages while increasing poling efficiency. Process times will be extremely short. The pr ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Advanced Conformal Piezoceramic Actuators

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes to develop durable and reliable conformal geometry actuator packages. These packages will have the ability to operate as linear actuators for motion control applications as well as to conform to structures with curved surfaces for applications requiring induced strain actuation. These packages provide a protective skin offering electrical isolation, and provide a means for integration ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. Damage Detection in Thick Walled Composites Using Surface Mounted Piezoelectric Elements

    SBC: Active Control eXperts, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseArmy
  9. Compact Piezoelectric Based Power Generation

    SBC: Active Devices, Inc.            Topic: N/A

    Active Devices proposes an innovation for energy harvesting using piezoelectric based approaches to extract energy from mechanical vibrations. This innovation consists of a piezoelectric element for energy transduction, rectifier circuits for extraction, and storage devices to store power for use by other devices. Ideal models predict that a 1" x1" x.010" piezoelectric wafer undergoing moderate ...

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
  10. COST REDUCTION DESIGNS OF A LARGE RANGE OF HIGH PERFORMANCE PM ALTERNATORS AND CONTROLS WITH A PARALLEL EMPHASIS ON...

    SBC: Active Technologies Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government