You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Innovative Power Module

    SBC: Abi            Topic: N/A

    At the end of Phase I, ABI will deliver a working "subscale" power module which runs on diesel fuel and has an output of approximately 25 horsepower at 3600 RPM. The overall size, exclusive of fuel pump, cooling, and 011 tank, will be approximately the size and shape of a roll of kitchen paper towels, about 15 cm diameter and less than 40 cm long, and less that 20 lbs. weight. Phase II will develo ...

    SBIR Phase I 1993 Department of DefenseNavy
  2. Self-routing Optical Crossbar Switch

    SBC: Abj Integration Technologies,            Topic: N/A

    High speed, low cost optical self routing optical crossbar switches with gigabit data rates are key components in optical communication and routing systems. We propose to fabricate and study a monolithically integrated optical crossbar switch which will be inexpensive and high performance. This integrated switch utilizes thin film emitters and detectors integrated directly onto a host integrated c ...

    SBIR Phase I 1993 Department of DefenseDefense Advanced Research Projects Agency
  3. Optical Link for Cryogenic FPA Readout Using Si Circuitry and Thin Film Emitters, Detectors, and Modulators

    SBC: Abj Integration Technologies,            Topic: N/A

    Standard Digital CMOS silicon circuits will have high quality Thin Film emitters, and modulators integrated on to the silicon using epitaxial liftoff and results in low cost opto-electronics in the near future. ABJ Integration is a leader in the field and proposes to design an optimized FPA readout system using this technology. Both emitters and modulators as signal sources will be investigated.

    SBIR Phase I 1995 Department of DefenseArmy
  4. Optoelectronic Packaging for Through-Substrate Communications

    SBC: Abj Integration Technologies,            Topic: N/A

    ABJ Integration Technologies, Inc. proposes to model a vertically optically interconnected stack of silicon integrated circuits to form a three dimensional system. This 3D system will utilize through-substrate optoelectronic communication to which the package and silicon are optically transparent. System optimization for user specifications will include materials and components such as emitters ...

    SBIR Phase I 1997 Department of DefenseArmy
  5. COST REDUCTION DESIGNS OF A LARGE RANGE OF HIGH PERFORMANCE PM ALTERNATORS AND CONTROLS WITH A PARALLEL EMPHASIS ON...

    SBC: Active Technologies Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  6. Non-Destructive Real-Time In-Situ Analysis of Vacuum Grown and Processed Infrared Material and Sensor Arrays

    SBC: ADAM INSTRUMENT CO., INC.            Topic: N/A

    The objective of the proposed project is to develop innovative new analytical instrumentation and methodology capable of performing fully automated, non-destructive analysis of semiconductor sensor elements and arrays locate on three inch diameter wafers. The instrumentation would be capable of analyzing II-VI compounds and alloys, particularly HgCdTe. The methodology would employ state-of-the-a ...

    SBIR Phase I 1997 Department of DefenseArmy
  7. Advanced Analytical Techniques for Determining Metal Speciation in Contaminated Soils

    SBC: ADAM INSTRUMENT CO., INC.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseArmy
  8. Detecting and Correcting Adaptive and Conventional Test Compromise

    SBC: Algorithm Design & Measurement            Topic: N/A

    Project objectives briefly described: i. Improve accuracy of measurement for cheating examinees by using a scoring method that takes account of the credibility of the examinee's patterm of wrong answers. ii. Provide an adjunct to on-line calibration that would assist in timing the replacement of items. iii. Identify test sites and recruiters that are associated with high rates of item compromis ...

    SBIR Phase I 1995 Department of DefenseNavy
  9. ADAPTIVE SUBBAND DECOMPOSITIONS FOR ARBITRARY TIME-FREQUENCY TILINGS

    SBC: Adaptronics, Inc.            Topic: N/A

    The extension of classical frequency domain and wavelet transformation adaptive subband decompositions result in arbitrary time frequency til. The use of a time-varying tree-structured filterbank is proposed to provide a signal dependent transform which is capable of tracking non-stationarities via local reconfigurations. Under stationary assemptions, the filterbank converges to a unitary operat ...

    SBIR Phase I 1995 Department of DefenseNavy
  10. Novel Recycling Process for Aircraft Transparencies

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for reclaiming scrap aircraft transparency materials. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200 C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Met ...

    SBIR Phase I 1995 Department of DefenseAir Force
US Flag An Official Website of the United States Government