You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Wind Noise Reduction Using the Multiple Aperture Sensor System

    SBC: PLANNING SYSTEMS, INC.            Topic: N/A

    Wind noise in outdoor measuemetn micropnones can mask an acoustic signal. Windscreens provide some wind noise reduction; however, those typically used for outdoor applications provide noise reductions of approximately 10-15 dB. Planning Systems Incorporated (PSI) proposes to design and test a Multiple Aperture Sensor System (MASS) consisting of a microphone, a processor, and data acquisitio and ...

    SBIR Phase I 1997 Department of DefenseAir Force
  2. Whole Wafer Thermal Measurements by Means of Laser Ultrasound

    SBC: KARTA TECHNOLOGIES            Topic: N/A

    The production of semi-conductor wafers is a multibillion dollar industry. The 1996 worldwide semiconductor market is estimated at $162 billion with a growth potential to $309 billion by the year 2000. Thus, even a small improvement in control during the manufacturing process could have a large impact on the economic viability of many companies and products. A critical factor in all semiconduct ...

    SBIR Phase I 1997 Department of DefenseAir Force
  3. WE PROPOSE TO DEVELOP A REPETITIVE, FAST-OPENING SWITCH FOR PULSED-POWER APPLICATIONS EMPLOYING SATURABLE MAGNETIC MATERIALS.

    SBC: MISSION RESEARCH CORP.            Topic: N/A

    WE PROPOSE TO DEVELOP A REPETITIVE, FAST-OPENING SWITCH FOR PULSED-POWER APPLICATIONS EMPLOYING SATURABLE MAGNETIC MATERIALS. THIS TECHNOLOGY HAS PROVEN EFFECTIVE AND RELIABLE IN ELECTRONIC SWITCHING SYSTEMS (ESS) USED IN TELEPHONE EXCHANGES. FOR PHASE I WE WILL DESIGN A PROOF- OF-PRINCIPLE EXPERIMENT; OPTIMIZING THE DESIGN, WHILE TAKING INTO ACCOUNT CONSIDERATIONS OF COST. SUCH A SYSTEM WOULD BE ...

    SBIR Phase I 1983 Department of DefenseAir Force
  4. (VIRCATOR) MICROVE SOURCE

    SBC: MISSION RESEARCH CORP.            Topic: N/A

    DURING PHASE I MISSION RESEARCH CORPORATION PROPOSES TO PERFORM A STUDY OF THE UTILITY OF CAVITY RESONATORS TO INCREASE THE EFFICIENCY AND MODIFY THE BANDWIDTH OF MICROWAVE EMMISSION FROM THE VIRCATOR. THE RESEARCH WILL INCLUDE BOTH A THEORETICAL AND EXPERIMENTAL EFFORT. NUMERICAL SIMULATIONS OF THE CAVITY DESIGN WILL BE CARRIED OUT USING A THREE DIMENSIONAL FULLY RELATIVISTIC AND ELECTROMAGNETIC ...

    SBIR Phase I 1983 Department of DefenseAir Force
  5. VALIDATION & TESTING OF THE VAM2D COMPUTER CODE

    SBC: Hydrogeologic Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Nuclear Regulatory Commission
  6. USER-ORIENTED MICROWAVE COUPLING SIMULATION CODE UTILIZING CAD BASED EXPERT SYSTEM ONN IBM PC-AT COMPATIBLES

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseAir Force
  7. USER INTERACTION WITH SELF-LEARNING SYSTEMS

    SBC: Decision Science Associates            Topic: N/A

    MILITARY INTEREST IN ARTIFICIAL INTELLIGENCE (AI) AND EXPERT SYSTEMS IS GROWING IN RESPONSE TO NEEDS FOR REDUCTING MANPOWER-INTENSIVE TASKS AND PROVIDING AID TO DECISION MAKERS WHOSE INFORMATIONPROCESSING CAPABILILTIES ARE BEING OVERTAXED. THE CUTTING EDGE OF RESEARCH ON EXPERT SYSTEMS CONCERNS SELF-LEARNING SYSTEMS, NAMELY, SYSTEMS WHOSE KNOWLEDGE BASES AND PROCESSING LOGIC CAN CHANGE IN RESPONSE ...

    SBIR Phase I 1988 Department of DefenseAir Force
  8. Ultra-Wideband Waveguide Bends Using Continuously Varying Dielectric (CVD) Materials

    SBC: FARR RESEARCH, INC.            Topic: N/A

    Bends in waveguides are a problem for high-voltage Ultra-Wideband (UWB) systems. The difficulty arises because only a straight section of standard transmission line can support a pure TEM mode. And a pure TEM mode is necessary to preserve the risetime of the transmitted impulse. When there is a bend in the waveguide, the transmitted signal is a broader impulse than the incident signal. This ca ...

    SBIR Phase I 1997 Department of DefenseAir Force
  9. Transport and Shipping of Diagnostic Specimen and Etiologic Agents

    SBC: Pro-tech-tube International,            Topic: N/A

    The proposed product, called Pro-Tech-Tube Infectious Shipper (PTTIF), will enable health care workers in military or commercial laboratories to ship diagnostic substances that may contain infectious microorganisms (including Level 1, 2, and 3 in the DoD Biological Defense Safety Program, Technical Safety Requirements) as FDA regulated biological products. Such products are not subject to current ...

    SBIR Phase I 1997 Department of DefenseAir Force
  10. THIN FILM COATINGS FOR INFRARED DETECTORS

    SBC: Polytronix Inc            Topic: N/A

    THE METHOD OF PLASMA ASSISTED CHEMICAL VAPOR DEPOSITION (PACVD) WILL BE EMPLOYED TO DEPOSIT QUARTER WAVELENGTH FILMS ON LONG WAVELENGTH IR DETECTORS (E.G., INSB). THE TECHNIQUE EMPLOYED HAS BEEN SHOWN TO PRODUCE FILMS OF TUNABLE REFRACTIVE INDEX (FROM 1.3 TO 2.3) AND THESE FILMS ARE KNOWN TO HAVE FAVORABLE PTICAL TRANSMISSION PROPERTIES. THESE FILMS WILL ENHANCE IR DETECTOR SENSITIVITY BY ACTING A ...

    SBIR Phase I 1988 Department of DefenseAir Force
US Flag An Official Website of the United States Government