You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. Comprehensible Descriptions for Fast Processing of Image Data

    SBC: DATAMAT SYSTEMS RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  3. Nonequilibrium Electron Transport in InP Based Hybrid Heterojunction

    SBC: EPITRONICS CORP.            Topic: N/A

    InP based heterojunction bipolar transistors (HBTs) exhibit proven potential for use in high performance digital integrated circuits and discrete microwave components. For high speed applications, it is desirable to utilize structures that have been designed to promote high levels of nonequilibrium electron transport as this allows realization of higher electron velocities than possible for diffus ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  4. Thermally Insulated Flexible Composite Cores for Aerospace Applications

    SBC: Infinite Materials & Products, Inc.            Topic: N/A

    Aerospace composite panels containing a core structure usually use an expanded honeycomb of either aluminum, NOMEX, or carbon fiber. These types of composite panels are often used as structure since the honey-comb core provides stiffness in the "Z" direction. However, they provide no thermal insulation value. Aerospace craft operating both inside and outside the earth's atmosphere experience envir ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  5. Environmentally Safe, Sprayable, Waterproof, Rapid Three Minute Room Temperature Cure Resin for the Manufacturing of Aerospace Composite Sealants

    SBC: Infinite Materials & Products, Inc.            Topic: N/A

    Currently manufactured aerospace composites absorb water vapor to varying degrees. This moisture absorption adds weight to the composite, however, it lowers the glass transition temperature. And, subsequently, the ultimate strength of the resin holding the composite together, in the total composite matrix. For aerospace vehicles that slip the bonds of Earth and enter the vacume of space, any compo ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. Computer Architecture, Algorithms, Models and Simulations

    SBC: INFORMATION SYSTEMS LABORATORIES, INC.            Topic: N/A

    Reconfigurable computing architectures based on Field Programmable Gate Arrays (FPGAs) offer extaordinary real time processing rates in inexpensive programmable hardware. The key to using FPGAs for reconfigurable computing is to reformulate algorithms in terms of parallel operations that are easily implemented with chains of simple processing elements. Currently available commercial integrated cir ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. Band-Gap Engineered Varistors

    SBC: Angstrom Devices, Inc.            Topic: N/A

    Solid-state electronic devices are often subjected to high voltage transients generated by switching, lightning, or electrostatic discharge. These transients can cause mission critical components to fail. Varistors are increasingly used to avoid such failures. The current varistor devices, however, are not well suited for high frequency applications and the increasing trend towards device miniatur ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  8. High Energy Density Inductors

    SBC: Angstrom Devices, Inc.            Topic: N/A

    Inductors are essential components of military and commercial power management and electronic systems. Existing ferrite based inductors have reached a technology plateau that allow only marginal improvements in performance per unit volume. It is anticipated that the future inductor based technologies, such as EMI suppression, would require significantly higher energy density inductors. Fundamental ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  9. Active Mode Millimeter Wave Imaging

    SBC: K&c Tech., Inc.            Topic: N/A

    This proposal addresses an approach to millimeter wave imaging called encoded image detection (EID). The concept offers a means of achieving a low cost, all weather seeker for smart munition and submunitions. Its low cost potential makes adaptation of the imager also attractive for a variety of other military applications such as search and rescue, surveillance, and security. Most current devel ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  10. Ultraspectral Imager

    SBC: Kestrel Corporation            Topic: N/A

    This Phase I SBIR demonstrates the underlying technology required to construct an ultraspectral imager that has the ability to spectrally resolve molecular absorption lines while simultaneously creating a two dimensional spatial mapping. The proposed instrument will have a spectral resolution that is better than 2 cm-1 and two dimensional spatial resolution that exceeds 2 milliradian. Based on Fou ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government