You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. LASER ALLOYING OF PLASMA-DEPOSITED COATINGS FOR PROTECTION AGAINST ATOMIC OXYGEN

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseMissile Defense Agency
  3. Comprehensible Descriptions for Fast Processing of Image Data

    SBC: DATAMAT SYSTEMS RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  4. INFRARED SENSOR AND IMAGING SYSTEM

    SBC: EMPIRICAL TECHNOLOGIES CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseMissile Defense Agency
  5. Ionic Self Assembled Monolayer (ISAM) Processes for Electronic Materials and Devices

    SBC: Luna Innovations Incorporated            Topic: N/A

    Novel ionic self-assembled monolayer (ISAM) processes for the fabrication of advanced electronic materials and devices will be developed through this program. Revolutionary ISAM methods to create nanostructured multi-layer inorganic/organic thin-films offer major advantages over conventional manufacturing processes, since the process is simple, low-cost and environmentally friendly in that no vola ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. Protective Coatings for Optical System Components Fabricated Using Ionic Self Assembled Monolayer (ISAM) Processes

    SBC: Luna Innovations Incorporated            Topic: N/A

    F&S and Virginia Tech will cooperatively develop high performance protective ionic self-assembled monolayer (ISAM) organic/inorganic coatings for space-based optical and structural components, and work with Litton to upscale practical coating manufacturing. Revolutionary ISAM methods of creating multi-layer protective nanopartwcle films offer major advantages over con-ventional coating processes, ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. VALIDATION & TESTING OF THE VAM2D COMPUTER CODE

    SBC: Hydrogeologic Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Nuclear Regulatory Commission
  8. Ultraspectral Imager

    SBC: Kestrel Corporation            Topic: N/A

    This Phase I SBIR demonstrates the underlying technology required to construct an ultraspectral imager that has the ability to spectrally resolve molecular absorption lines while simultaneously creating a two dimensional spatial mapping. The proposed instrument will have a spectral resolution that is better than 2 cm-1 and two dimensional spatial resolution that exceeds 2 milliradian. Based on Fou ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  9. Sensors-Adaptive Beam Expander

    SBC: LSA            Topic: N/A

    We propose to design and fabricate an adaptive beam expander that can be switched between two magnifications. Specifically, the beam expander provides diffraction-limited performance for laser radar beams with diameters of 1 mm and 3 mm. The adaptive beam expander is lightweight, and it has no moving parts. Because the beam expander is an afocal system, it operates on both outgoing and incoming be ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Ultrafine HfC/TaC for Rocket Thrusters

    SBC: Materials Modifications Inc.            Topic: N/A

    Liquid rocket engine performance can be dramatically improved by increasing the wall temperatures for operation concurrent with a reduction in the component weight. The bipropellant fuel combustion temperatures are between 3000 "approx" 3500 C. The conventional thrusters and exit nozzles made of niobium alloys have a maximum operating temperature limit of 1600 C. A regenerative cooling technolo ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government