Award Data

This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

N/A

Phase I proposes to demonstrate an easy-to-operate, inexpensive room temperature neutron detector based on boron-doped diamond. The detector would produce an immediate signal related to low-level neutron irradiation. The concept exploits the high neutron absorption cross section of B-10, which results in excellent sensitivity. The charge carriers generated in the diamond by a neutron absorption ev ...

Unexpected coupling between nuclear reaction cross sections and the solid state of metal deuterides has been demonstrated in layered Pd-PdO deuterided structures. As a result, high rates of charged particle and neutron measurements have been observed through a reaction initiated by altering the chemical state of the system. Moreover, the system acts as an amplifier of fast neutrons, with a 200-to- ...

The development of a microwave curing method for resin matrix composites and jointing/bonding epoxy is proposed. This technique will take advantage of the ability of vapor-grown carbon fiber (VGCF) to absorb microwave energy with high efficiency. By adding VGCF to resin matrix composite material and epoxy, we hope that the materials can be processed by microwave irradiation in a manner that result ...

properties: Intramolecular and intermolecular charge transfers in phthalocyanine molecules can be used as signal generators for information processing and storage; phthalocyanine molecules show an excellent molecular stability resistant to environmental changes and harsh conditions, high thermal stability up to 280¿ C in normal environment and up to 700-800¿ C in vacuum, resistive to B and most ...

Currently, thermal spray (flame and plasma spray) is the only single step method of applying most metal and non-oxide ceramic coatings to large objects. These coatings are usually of a low quality, and thin films cannot be applied. An in situ deposition technique that inexpensively and easily applies nitrides, carbides and other non-oxide thin or thick films in an environmentally friendly manner i ...

Currently vacuum based methods of PVD and CVD are the only processes for forming GaN thin films and coatings. These methods are usually expensive and are not applied in a production friendly manner. An atmospheric deposition technique that inexpensively and easily applies GaN thin or thick films in an environmentally friendly manner is a priority for any number of DOD and commercial applications. ...

The primary goal of Phase I work is to demonstrate the feasibility of synthesizing gallium nitride (GaN) powder. Secondarily, this powder will be used to grow high-purity single crystals of GaN from a liquid GaN phase. This would be accomplished using a proprietary variation of the skull melting technique. Since GaN demonstrates peritectic-type decomposition at atmospheric pressure, the entire sku ...

N/A