You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Power Density Dual Rotor Permanent Magnet Motor with Integrated Cooling and Drive for Aircraft Propulsion

    SBC: Advanced Magnet Lab, Inc.            Topic: 1

    There is a critical need for electrification of transportation systems. The proposed technology enables the development of very high-power density permanent magnet motors, which when coupled to an integrated SiC drive allows for an overall specific power beyond 12 kW/kg. The proposed concept relies on the tight integration of a high-power density dual-rotor permanent magnet motor, high power densi ...

    STTR Phase II 2020 Department of EnergyARPA-E
  2. High Power Density Dual Rotor Permanent Magnet Motor with Integrated Cooling and Drive for Aircraft Propulsion

    SBC: Advanced Magnet Lab, Inc.            Topic: 1

    There is a critical need for electrification of transportation systems. The proposed technology enables the development of very high-power density permanent magnet motors, which when coupled to an integrated SiC drive allows for an overall specific power beyond 12 kW/kg. The proposed concept relies on the tight integration of a high-power density dual-rotor permanent magnet motor, high power densi ...

    STTR Phase II 2020 Department of EnergyARPA-E
  3. Cross-polarized Near-UV/Vis Detector for In-line Quality Control of PEM Materials

    SBC: MAINSTREAM ENGINEERING CORP            Topic: 14b

    Modern fuel cells have been in development since the 1960s and stand on the cusp of commercialization, but are held back by high manufacturing costs and expensive catalysts. Membrane costs alone can account for as much as 45% of the total cost of a commercial fuel cell system. Furthermore, manufacturing defects in the membrane can cascade into complete stack failure, which is expensive and time co ...

    SBIR Phase II 2020 Department of Energy
  4. High Efficiency Cyclone Separator for Sub-micron Particle Concentration

    SBC: MAINSTREAM ENGINEERING CORP            Topic: DTRA182006

    The Radionuclide Aerosol Sampler and Analyzer (RASA) is a completely automated monitoring system that detects airborne radioactive particles and is one of the detection systems used in the U.S. and global International Monitoring System (IMS) of the Comprehensive Nuclear Test Ban Treaty Organization (CTBTO) to detect nuclear detonations. To improve performance, Mainstream proposes to develop a hig ...

    SBIR Phase II 2020 Department of DefenseDefense Threat Reduction Agency
  5. Ground-based water vapor atmospheric vertical profiler

    SBC: MESA PHOTONICS LLC            Topic: 25b

    Detailed accurate data on temperature variations and water vapor concentration distributions are needed for weather and climate forecasting. Water vapor is particularly important for predicting precipitation amounts from storms. Measurements are needed from the ground to the top of the troposphere at about 10 km altitude. Existing ground-based instruments often have measurement uncertainties due t ...

    SBIR Phase II 2020 Department of Energy
  6. Non-destructive, Functional Metabolic Imaging of Plant and Microbial Systems

    SBC: MESA PHOTONICS LLC            Topic: 27a

    Functional metabolic imaging of plant and microbial systems requires a sensitive, high spatial resolution microscopy method that can image metabolically important compounds in situ. This will require new chemically sensitive imaging methods to be developed. In this SBIR/STTR, we will develop a new coherent Raman-based microscopy technique called Doppler Raman that will improve sensitivity over exi ...

    SBIR Phase II 2020 Department of Energy
  7. Ultrafast Polysilylene Scintillators

    SBC: Adherent Technologies, Inc.            Topic: N/A

    40640 November 12, 1996 Adherent Technologies, Inc. Scintillators have been used for over 90 years to detect ionizing radiation, but solid organic scintillator, commonly used in physics experimentation, suffer from errors caused by pulse pileup. To minimize this problem, this project will examine a new class of polymeric materials which also offer the po ...

    SBIR Phase II 1997 Department of Energy
  8. High Power Target Design for a Next Generation Radioactive Beam ISOL-Type Facility

    SBC: Amparo Corp.on            Topic: N/A

    40063 November 4, 1996 Amparo Corporation First-generation radioactive beam facilities, in use or under construction, cannot completely address many of the scientific opportunities envisioned until an intense production beam is employed. This project addresses a key element in filling this need, the design of high power nuclear targets. The targe ...

    SBIR Phase II 1997 Department of Energy
  9. Chemical Stimulation of Oil Wells Producing from Carbonate Reservoirs

    SBC: Correlations Company            Topic: N/A

    65017 Oil well formation damage is detrimental to the oil production rate and ultimate recovery from carbonate reservoirs that contain 3.7 billion barrels of proved domestic reserve. This project will develop an innovative well stimulation technique, based on laboratory measurements of wettability alteration coupled with artificial intelligence, to design well treatments. Phase I laborator ...

    SBIR Phase II 2002 Department of Energy
  10. Reflex Triode

    SBC: KTECH CORP.            Topic: N/A

    "Reflex triode bremsstrahlung sources potentially provide warm X-ray sources (20 keV to 500 keV), capable of generating high doses (~10 cal/g gold) over exposure areas of ~20 cm2. This needed capability allows experimental verification of warm X-ray inducedthermomechanical response, SGEMP, and box IEMP models for achieving component and system certification to hostile environments.In a reflex trio ...

    SBIR Phase II 2002 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government