You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Compact, High Pulse Rate, Mid-Infrared laser

    SBC: Aculight Corporation            Topic: N/A

    We propose to develop and deliver a compact, high pulse repetition rate, mid-infrared optical parametric oscillator wavelength converter and cw fiber coupled diode pumped, Q-switched, Nd:YV04 diode pumped laser. A new nonlinear material, periodic poled Lithium Niobate (PPLN) enables an OPO to efficiently convert low energy pulses (150 microjoules) into the mid-infrared wavelengths. By changing t ...

    SBIR Phase II 1997 Department of DefenseNavy
  2. Low Power Long Wave Infrared Laser Sources

    SBC: Aculight Corporation            Topic: N/A

    With new detectors capable of sensing 7.5 - 9 micron wavelengths, a future threat is emerging since these detectors can be used in seekers. The need is to counter this threat with a laser source operating at 7.5 - 9 microns. The source requirements are 5 - 10 Watts of average power and a repetition rate of > 10 kHz. The proposed laser source is a Nd:YAG-pumped tandem OPO system consisting o ...

    SBIR Phase I 1997 Department of DefenseNavy
  3. Low-cost, high brightness, short-pulse eyesafe solid-state laser transmitter for long-range missile defense

    SBC: Aculight Corporation            Topic: N/A

    For future long-range theater ballistic missile defense, aircraft-mounted LADAR systems require eyesafe laser transmitters that produce higher pulse energy and better beam quality than currently available optical parametric oscillators (OPOs) pumped by diode-pumped Nd:YAG lasers. Aculight proposes a novel laser transmitter approach that can simultaneously generate the required pulse energy, b ...

    SBIR Phase I 1997 Department of DefenseNavy
  4. Compact, High Pulse Rate, Mid-Infrared laser

    SBC: Aculight Corporation            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseNavy
  5. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  6. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  7. COMPACT HIGH POWER LASERS FOR MODERN DEFENSE APPLICATIONS

    SBC: Advec Corp.            Topic: N/A

    THE DEVELOPMENT OF COMPACT, HIGH ENERGY DENSITY, HIGH POWER (AND POTENTIALLY C.W.) LASER SYSTEMS CAPABLE OF PROPAGATING THROUGH BOTH AIR AND WATER COULD PAVE THE WAY FOR NEXT GENERATION TACTICAL NAVAL SYSTEMS. APPLICATIONS IN OTHER DEFENSE AREAS AS WELL AS A HOST OF COMMERCIAL APPLICATIONS ARE ALSO POSSIBLE WITH THESE TYPES OF SYSTEMS. WE PROPOSE TO PROVIDE A DETAILED PLAN AND DESIGN OF SPECIFIC E ...

    SBIR Phase II 1989 Department of DefenseNavy
  8. COMPACT HIGH POWER LASERS FOR MODERN DEFENSE APPLICATIONS

    SBC: Advec Corp.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseNavy
  9. POLYMERIC CARTRIDGE CASE

    SBC: Ammunition Technologies Inc            Topic: N/A

    THE OBJECT OF THIS EFFORT WILL BE A REDUCTION IN WEIGHT AND PRODUCTION COSTS, RELATING TO THE CURRENT 5.56 BRASS CASED AMMUNITION CARRIED BY THE U.S. MILITARY FORCES. IT WILL INVOLVE THE EVALUATION OF MATERIALS AND DESIGNS USED BY AMMUNITION TECHNOLOGIES INC (A.T.I.) IN THE DESIGN AND CONSTRUCTION OF THE M193 PLASTIC CARTRIDGE CASE DEMONSTRATED AT FORT LEWIS WASHINGTON IN SEPTEMBER OF 1988. THESE ...

    SBIR Phase I 1990 Department of DefenseNavy
  10. Low Cost, High Performance GPS/IMU Attitude and Orientation System

    SBC: Applied Analytics, Inc.            Topic: N/A

    The objective is to show that the performance requirements and costs of GPS/IMU implementations of attitude and sightline systems are substantially lower than those of conventional non- GPS aided designs. The errors of integrated GPS/IMU attitude and sightline stabilization systems are determined by simulations of these systems using complete mathematical models of IMUs and GPS receivers. The GPS ...

    SBIR Phase II 1997 Department of DefenseNavy
US Flag An Official Website of the United States Government