You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Optoelectronic Packaging for Through-Substrate Communications

    SBC: Abj Integration Technologies,            Topic: N/A

    ABJ Integration Technologies, Inc. proposes to model a vertically optically interconnected stack of silicon integrated circuits to form a three dimensional system. This 3D system will utilize through-substrate optoelectronic communication to which the package and silicon are optically transparent. System optimization for user specifications will include materials and components such as emitters ...

    SBIR Phase I 1997 Department of DefenseArmy
  2. Damage Detection in Thick Walled Composites Using Surface Mounted Piezoelectric Elements

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Herein ACX proposes a damage detection system based on ACX's QuickPack+ technology to combine piezoelectric actuators and sensors in a robust, easily mounted transducer package. The QuickPack encapsulates a piezoceramic with insulating flex circuit material and a simple connector. The transducer package will be bonded via a low-melting-point thermoplastic adhesive to ensure removability. The t ...

    SBIR Phase II 1997 Department of DefenseArmy
  3. Damage Detection in Thick Walled Composites Using Surface Mounted Piezoelectric Elements

    SBC: Active Control eXperts, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseArmy
  4. Aided recovery from Visual Loss

    SBC: AMS. Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseArmy
  5. Metal Hydride Preheater for M2 Diesel Burner

    SBC: Advanced Mechanical Technology, Inc.            Topic: N/A

    The XA2 gasoline burner is widely used by the military to meet a variety of food preparation and heating requirements in the field. Because of the trend toward an single-fuel Army vehicle fleet and away from gasoline as a general purpose fuel, a diesel/JPS fueled burner is sorely needed. A recently developed catalytic vapor generator together with the proposed metal-hydride preheater should prov ...

    SBIR Phase I 1997 Department of DefenseArmy
  6. PATTERNED ETCHING OF INFRARED DETECTOR ARRAYS

    SBC: Aerodyne Research, Inc.            Topic: N/A

    WE PROPOSE TO DEVELOP A PATTERNED ETCHING TECHNIQUE FOR INFRARED DETECTOR ARRAYS BASED ON PHOTO-INDUCED ETCHING OF HGCDTE THAT IS COMPATIBLE WITH THE ULTRA-HIGH VACUUM ENVIRONMENT OF A MOLECULAR BEAM EPITAXY APPARATUSES. THE PHASE I RESEARCH FOCUSES ON ESTABLISHING THE EFFICACY OF SUITABLE GAS PHASE PRECURSORS FOR THE ETCHING PROCESS. IF THE PHASE I RESEARCH IS SUCCESSFUL, OPTICAL PROJECTION TECHN ...

    SBIR Phase I 1990 Department of DefenseArmy
  7. A COLD FLOW TEST FACILITY FOR IR SUPPRESSORS

    SBC: Aerodyne Research, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseArmy
  8. SATELLITE KILL ASSESSMENT SPECTROSCOPY

    SBC: Aeromet, Inc.            Topic: N/A

    TO MEET THE KINETIC ENERGY ANTI-SATELLITE (KE ASAT) REQUIREMENTS FOR TIMELY AND RELIABLE KILL ASSESSMENT, AEROMET PROPOSES TO RECOMMEND INNOVATIVE TECHNIQUES IN REAL-TIME KILL ASSESSMENT SPECTROSCOPY. BECAUSE IT CAN BE CRITICALLY IMPORTANT TO ACCURATELY VERIFY SATELLITE ELIMINATION, A KILL ASSESSMENT SYSTEM MUST DISCERN BETWEEN VARIOUS HIT AND MISS PHENOMENA, INCLUDING THE USE OF POTENTIAL COUNTER ...

    SBIR Phase I 1990 Department of DefenseArmy
  9. Toughened E-Beam Curable Resins for Low Cost, Rapidly Pultruded, Filament Wound and Resin Transfer Molded Composites

    SBC: AEROPLAS CORP. INTERNATIONAL            Topic: N/A

    The objective of the proposed program is to demonstrate the feasibility of an innovative, cost-effective, rapid-pultrusion composite processing technique and newly formulated resins which substantially reduce the need for expensive tooling, high puller tensions (dies are expected to be an order of magnitude shorter than conventional pultrusion dies) and slow thermal processing and can cure the com ...

    SBIR Phase II 1996 Department of DefenseArmy
  10. Issues of Adaptive Automated Surveys in a Computer Network Environment

    SBC: ALPHATECH, INC.            Topic: N/A

    Network surveys hold great promise for information and data gathering, and would allow almost instantaneous access to large and diverse populations. Although there is a mature literature on survey methodology in other media, little is known about how networks might interact with survey processes or impact response accuracy. ALPHATECH proposes to analyze existing survey literature to identify cri ...

    SBIR Phase I 1997 Department of DefenseArmy
US Flag An Official Website of the United States Government