You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. DEVELOPMENT OF A DYNAMIC OPERATIONAL RISK MODEL TO SUPPORT RISK MANAGEMENT OF NUCLEAR POWER PLANTS

    SBC: Accident Prevention Group            Topic: N/A

    CURRENT ACTIVITY WITHIN THE NRC AND THE NUCLEAR INDUSTRY SEEKS TO EXPLOIT THE BENEFITS OF PRA IN RISK-BASED APPROACHES TO RELIEVE REGULATORY BURDEN ON THE ECONOMICALLY THREATENED NUCLEAR POWER PLANTS. THE ACCIDENT PREVENTION GROUP HAS BEEN DEVELOPING THE CONCEPT OF AN INTEGRATED RISK MANAGEMENT PROGRAM (IRMP) TOWARD SUCH GOALS. A KEY ELEMENT OF AN IRMP IS AN "OPERATIONAL RISK MODEL" OF THE NPP THA ...

    SBIR Phase I 1994 Nuclear Regulatory Commission
  2. Validation and security verification using a holographic phase mask correlator

    SBC: Accuwave Corp.            Topic: N/A

    Accuwave Corporation will study the feasibility of a volume holographic, phase-encoded optical image correlator for credit card and document validation and security application. Fourier transform holograms of a phase-encoded input image are stored using wavelength multiplexed holographic gratings in a photorefractive crystal. High spatial resolution images can be sotred with low crosstalk using ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  3. Compact, High Capacity Parallel Optical Memories

    SBC: Accuwave Corp.            Topic: N/A

    In this proposed SBIR program, Accuwave will investigate and demonstrate architectures for compact hologrpahic storage using materials and system innovations to reduce complexity and improve performance. Crosstalk, data formatting, input/output interfaces, and other relevant parameters will be characterized. Both wavelength and angle multiplexing, as well as its combination, will be used to prov ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. Rotorcraft Model Enhancements to Support Land and Sea-Based Testing and Operational Analysis

    SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC.            Topic: N/A

    We Propose to enhance rotorcraft simulation model to support land and sea-based flight testing and operational analysis. The model enhancement will resolve the long-time perplexing problems related to the fundamental simulation requirement for an accurate prediction of rotorcraft response in full range of flight. The solution proposed is to improve the widely used finite state dynamic wake ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: Applied Electroless Concepts,            Topic: N/A

    A new Navy process substitutes low toxicity trivalent chromium for toxic hexavalent chromium in aluminum conversion coatings. Further work is needed to investigate variations on the original formulations, with special consideration to formulas useful with common alloys of aluminum. Both a yellow and a blue-bright conversion film are desirable. Fractional Factorial Experimental Designs will be used ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  6. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  7. Measurement of Fuel Spray Interactions

    SBC: COMPLERE INC            Topic: N/A

    Quantitative measurement of spray patterns is of fundamental importance in the development of efficient and practical aerospace propulsion and power systems. At present, there is considerable interest in obtaining measurements of fuel and air motions in both fuel droplet and solid particle combustors since the velocity of the fuel relative to the gas strongly influences the local oxygen supply, t ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  8. Development of a Commercial FOM for 3D Interactive Entertainment Applications

    SBC: PERCEPTRONICS SOLUTIONS, INC.            Topic: N/A

    Perceptronics and its team members, Litton Guidance & Control Systems and Infinity Multimedia, will demonstrate that the High Level Architecture (HLA) provides a viable approach for multi-participant entertainment applications and implement an HLA federation and a Federation Object Model (FOM) for this domain. A simple tennis-like game with both 2D and 3D visualization will be used as representat ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Advanced Tooling Manufacturing for Composite Structures (ATMCS)

    SBC: Fem Engineering            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  10. SCOPING ANALYSIS OF LWR SHUTDOWN ACCIDENTS INITIATED BY EARTHQUAKES AND INTERNAL FIRES

    SBC: Future Resources Associate Inc            Topic: N/A

    N/A

    SBIR Phase I 1990 Nuclear Regulatory Commission
US Flag An Official Website of the United States Government