You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Design, Manufacture, and Test of an Underwater Acoustic Intensity Probe

    SBC: Acoustech Corporation            Topic: N/A

    The Acoustech Corporation as the prime contractor and the Pennsylvania State University - Applied Research Labc-atory as the subcontractor propose to design, manufacture, and test an underwater acoustic intensity probe containing a geophone and two-hydrophones encased in a neutrally buoyant package. The results of this proposed effort are anticipated to be highly successful since the researc ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  3. Predictive Filtering of Situation Awareness Position Information

    SBC: DANIEL H WAGNER ASSOCIATES INC            Topic: N/A

    The proposed research project is directed at the problem of reducing communications requirements for Situation Awareness Target location by using an optimal Kalman filter to predict target motion, and only communicating data when the target position differs sufficiently from the position predicted by the filter. Our Phase I approach is to quantify the bandwidth limitations of the communications s ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. ELECTROMAGNETIC ENVIRONMENTAL EFFECTS WITHIN A NUCLEAR POWER PLANT

    SBC: MISSION RESEARCH CORP.            Topic: N/A

    MRC PROPOSES TO DEVELOP A SAFETY PERFORMANCE INDICATOR (PI) OF THE ELECTROMAGNETIC (EM) PROTECTION STATUS OF A NUCLEAR POWER PLANT (NPP). WE BELIEVE THAT SUCH A PI IS NEEDED BECAUSE: (1) EM ENVIRONMENTAL POLLUTION IS ON THE INCREASE,(2) ADDITIONAL EM THREATS MUST BE EVALUATED, AND (3) DISRUPTION OF NPP OPERATIONS BY EM EFFECTS CAN AND MUST BE AVOIDED. PREVIOUS STUDIES HAVE ADDRESSED THE ISSUE OF E ...

    SBIR Phase I 1990 Nuclear Regulatory Commission
  5. Advanced Fasteners for Low Cost Airframe Assembly and Repair

    SBC: NAVMAR APPLIED SCIENCES CORP            Topic: N/A

    This SBIR proposes the development of the 3/16 inch diameter "Wing-It" blind fastener. This effort will include fastening both aluminum and composite sheet material. The technical objective is to demonstrate a low-cost fastener for future aircraft as an alternative to production fasteners. The "Wing-It" fastener distributes the load in the joint over a much larger area than conventional fastene ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Novel Matrix Addressable Sonar Transducer

    SBC: Sensortex            Topic: N/A

    This Small Business Innovation Research Phase I will fabricate a new transducer element, which is matrix addressable, conformable and low cost. It is based on the use of a composite magnetoelectric film fabricated as a hollow cylinder. This cylinder contains both the sensing elements and the matrix-forming element. This approach builds on previous work on a composite laminar maggetoelectric mat ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government