You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. OpenROOM: Architecture for Real-Time Objects

    SBC: Advanced Systems & Technologies Inc            Topic: N/A

    The ultimate purpose of the proposed R&D is to develop and demonstrate an innovative software development environment which supports the engineering, analysis, development, test, maintenance, and reuse of software for embedded, heterogeneous, real-time systems. The proposed approach is innovative in two respects: (1) it is based on the integration of two best-of-breed environments, ObjecTime/ROOM ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  3. Mission Flexible, Low Cost, Suborbital Launch Vehicle

    SBC: AEROASTRO, INC.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of DefenseMissile Defense Agency
  4. High Performance Arcjet Engines

    SBC: Applied Sciences Inc.            Topic: N/A

    IT IS PROPOSED THAT ADVANCED ARCJET ENGINES CAN BE DEVELOPED USING KNOWN PRINCIPLES FOR ADVANCED NOZZLE DESIGN, ARC ATTACHMENT, INCREASED CHAMBER EFFECTIVE TEMPERATURE AND SO FORTH. SUCH STUDIES ARE PARTIALLY SUPPORTED BY EXPERIMENTAL RESULTS BY RESEARCHERS IN THE RUSSIAN FEDERATION. YET THESE PRINCIPLES RESULT IN INCREASED HEATING OF THE ANODE, AS THE ARC MORE EFFECTIVELY HEATS THE ANODE. THIS CA ...

    SBIR Phase I 1993 Department of DefenseMissile Defense Agency
  5. Thermionic Nuclear Thermal Propulsion Bimodal Reactor

    SBC: Applied Sciences Inc.            Topic: N/A

    BIMODAL REACTORS FOR POWER AND PROPULSION HAVE LONG BEEN OF INTEREST FOR MISSIONS REQUIRINGS BOTH HIGH POWER AND LARGE DELTA-V; E.G., HIGH ALTITUDE, GEOSYNCHRONOUS AND PLANETARY MISSIONS. IT PROPULSIVE THRUST AND ELECTRIC POWER CAN BOTH BE SUPPLIED FROM THE SAME UNIT, A LARGE POTENTIAL SAVINGS CAN OCCUR. SUCH A REACTOR CAN BE DEVELOPED FROM A URANIUM CARBIDE FUELED THERMIONIC REACTOR WITH SINGLE C ...

    SBIR Phase I 1993 Department of DefenseMissile Defense Agency
  6. Solid State Neutron Detector

    SBC: Applied Sciences Inc.            Topic: N/A

    Phase I proposes to demonstrate an easy-to-operate, inexpensive room temperature neutron detector based on boron-doped diamond. The detector would produce an immediate signal related to low-level neutron irradiation. The concept exploits the high neutron absorption cross section of B-10, which results in excellent sensitivity. The charge carriers generated in the diamond by a neutron absorption ev ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  7. Solid State Neutron Sensor

    SBC: Applied Sciences Inc.            Topic: N/A

    Unexpected coupling between nuclear reaction cross sections and the solid state of metal deuterides has been demonstrated in layered Pd-PdO deuterided structures. As a result, high rates of charged particle and neutron measurements have been observed through a reaction initiated by altering the chemical state of the system. Moreover, the system acts as an amplifier of fast neutrons, with a 200-to- ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. A Novel Technique for Processing Advance Composites and Joining/Bonding Epoxy

    SBC: Applied Sciences Inc.            Topic: N/A

    The development of a microwave curing method for resin matrix composites and jointing/bonding epoxy is proposed. This technique will take advantage of the ability of vapor-grown carbon fiber (VGCF) to absorb microwave energy with high efficiency. By adding VGCF to resin matrix composite material and epoxy, we hope that the materials can be processed by microwave irradiation in a manner that result ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. MULTI LEVEL SECURE IMAGE OPERATING SYSTEM

    SBC: ARIES Technology Corporation            Topic: N/A

    This proposed study will accomplish the following: Investigate methods for allocating image resources in MLS operating systems. Investigate methods for controlling image processes from MLS (OS). Develop algorithms for efficient image management in MLS OSs. Develop algorithms for efficient image processing security in MLS OSs. Provide a framework for automatic downgrading of images using a MLS OS. ...

    SBIR Phase II 1995 Department of DefenseMissile Defense Agency
  10. High Temperature Optoelectronics

    SBC: ASTRALUX, INC.            Topic: N/A

    There are no commercial amplifiers that can operate at temperatures above 125 degrees Celsius. We will combine two comparable wide bandgap semiconducting materials to make electronic amplifiers and switches that operate at high temperatures (at least 500 degrees Celsius). These devices can be controlled remotely by a light beam. Hence wireless coupling to a room temperature macroprocessor is possi ...

    SBIR Phase II 1993 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government