You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Ultraspectral Imager

    SBC: Kestrel Corporation            Topic: N/A

    This Phase I SBIR demonstrates the underlying technology required to construct an ultraspectral imager that has the ability to spectrally resolve molecular absorption lines while simultaneously creating a two dimensional spatial mapping. The proposed instrument will have a spectral resolution that is better than 2 cm-1 and two dimensional spatial resolution that exceeds 2 milliradian. Based on Fou ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  2. Ultrahigh Quality, Single-Crystal Bulk Silicon Carbide

    SBC: INTRINSIC SEMICONDUCTOR CORP.            Topic: N/A

    Silicon carbide materials will revolutionize semiconductor devices for military and commercial markets. The material's wide bandgap, high electric field breakdown, high thermal conductivity give SiC capabilities that far exceed those of silicon or gallium arsenide. Despite significant progress in silicon carbide development, fundamental defects--most prominently micropipes--persist. If SiC is to s ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. Ultra-high Dielectric Constant Dielectric Materials

    SBC: T P L, INC            Topic: N/A

    NON-NUCLEAR APPROACHES ARE SOUGHT FOR HIGH ENERGY DENSITIES FOR SPACE POWER SYSTEMS. ONE CRITICAL COMPONENT TO ACHIEVE IMPROVED PERFORMANCE IS CAPACITOR STORES. THESE ARE DEPENDENT UPON ADVANCES IN LOW LOSS, HIGH ENERGY/HIGH POWER DENSITY STORAGE MATERIALS. A UNIQUE INORGANIC COMPOSITE IS PROPOSED FOR INVESTIGATION AS A HIGH ENERGY DENSITY STORAGE MATERIAL. AN APPROACH IS FORMULATED BASED ON SOL-G ...

    SBIR Phase II 1996 Department of DefenseMissile Defense Agency
  4. Ultrafine SiC for Optical Mirrors

    SBC: Materials Modifications Inc.            Topic: N/A

    SiC has exceptionally high thermal conductivity and low linear expansion coefficient to resist thermal distortion, high elastic modulus to resist pressure and bowing distortion. It is lightweight and wear resistant. It also has excellent corrosion resistance and outstanding load bearing characteristics at elevated temperatures. Its hardness is only surpassed by diamond, CBN and boron carbide. As ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  5. Ultrafine HfC/TaC for Rocket Thrusters

    SBC: Materials Modifications Inc.            Topic: N/A

    Liquid rocket engine performance can be dramatically improved by increasing the wall temperatures for operation concurrent with a reduction in the component weight. The bipropellant fuel combustion temperatures are between 3000 "approx" 3500 C. The conventional thrusters and exit nozzles made of niobium alloys have a maximum operating temperature limit of 1600 C. A regenerative cooling technolo ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  6. Solid-State Spray Forming of Near-Net-Shape Structural Materials

    SBC: INNOVATIVE TECHNOLOGY INC            Topic: N/A

    The objective of this research is to demonstrate the feasibility of spray forming aluminum Metal Matrix Composites (MMC) in the solid-state physical form as a light weight structural material. It is anticipated that this innovative manufacturing process will provide opportunities to fabricate near-net-shape spacecraft and interceptor structures with unique material properties. The process called S ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. SIDEBAND SUPPRESSION IN HIGH POWER FREE ELECTRON LASERS

    SBC: MISSION RESEARCH CORP.            Topic: N/A

    A SELF-REGENERATIVE FEEDBACK TECHNIQUE IS BEING INVESTIGATEDTO SUPPRESS THE FORMATION OF SIDEBANDS THAT LIMIT THE SPECTRAL BRIGHTNESS AND GENERAL PERFORMANCE OF PRESENT HIGH-POWER FREE ELECTRON LASERS (FELS). THIS TECHNIQUE DOES NOT INVOLVE INTRA-CAVITY COMPONENTS THAT SUFFER LOSS DAMAGE DUE TO HIGH POWER OPERATION. A POTENTIAL BREAKTHROUGH IN FEL TECHNOLOGY, ANALYSIS AND SIMULATION ARE BEING PERF ...

    SBIR Phase II 1990 Department of DefenseMissile Defense Agency
  8. Sensors-Adaptive Beam Expander

    SBC: LSA            Topic: N/A

    We propose to design and fabricate an adaptive beam expander that can be switched between two magnifications. Specifically, the beam expander provides diffraction-limited performance for laser radar beams with diameters of 1 mm and 3 mm. The adaptive beam expander is lightweight, and it has no moving parts. Because the beam expander is an afocal system, it operates on both outgoing and incoming be ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Pulsed High Energy Synthesis of Fine Metal Powders

    SBC: UTRON, Inc.            Topic: N/A

    Demand for micrometer size metal powders is increasing rapidly as new technologies emerge which can make use of their unique characteristics. One rapidly growing application requiring such powders is metal injection molding, a powder metallurgy process for forming near-net-shape components with higher dimensional accuracy than earlier processes. A significant need also exists for micrometer size s ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  10. Protective Coatings for Optical System Components Fabricated Using Ionic Self Assembled Monolayer (ISAM) Processes

    SBC: Luna Innovations Incorporated            Topic: N/A

    F&S and Virginia Tech will cooperatively develop high performance protective ionic self-assembled monolayer (ISAM) organic/inorganic coatings for space-based optical and structural components, and work with Litton to upscale practical coating manufacturing. Revolutionary ISAM methods of creating multi-layer protective nanopartwcle films offer major advantages over con-ventional coating processes, ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government