You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Electromagnetic Resonance Sensors for Determination of Moisture Content in Concrete

    SBC: American Research Corporation of Virginia            Topic: N/A

    The overall quality and the comprehensive strength, in particular, of concrete are critically dependent on the water content in the concrete mixture. It is also essential to know if the concrete has reached a stage of moisture equilibrium before surface finishes such as paint or carpet can be applied. At present, no reliable method or easy-to-use instrument exists for determining the moisture co ...

    SBIR Phase I 1995 Department of Commerce
  2. Process-Based Assurance Product Suite

    SBC: Arca Systems, Inc.            Topic: N/A

    Arca proposes research leading to development of a suite of methodology support products to help meet the need for innovative assurance techniques appropriate for emerging information technologies. The product will consist of a licensable methodology and supporting materials for specifying, building, and evaluating assurance arguments for products and systems based on the capability of security en ...

    SBIR Phase I 1997 Department of Commerce
  3. CAD of Non-linear Optical Properties of Thin-film Structures

    SBC: Autometric Inc.            Topic: N/A

    This proposal addresses development of CAD software for simulating non-linear optical materials. The software will provide a virtual lab in which experimental setups are simulated. The proposed software is based on the use of a Maxwell differential equation solver, the Finite Difference Time Domain (FDTD) method. This numerical method has been developed by numerous researchers since 1968 and no ...

    SBIR Phase I 1995 Department of Commerce
  4. Algorithms for Health Care Quality Management and Outcomes Assessment

    SBC: BARRON ASSOCIATES, INC.            Topic: N/A

    American health care is in the midst of momentous change. Quality improvement principles are being used increasingly to enhance productivity and efficiency of health care delivery and to help contain costs. In producing patient outcomes and resource utilization measures, it is vital to control appropriately for case mix (i.e., differences in patients due, e.g., to illness severity) in the predicti ...

    SBIR Phase I 1997 Department of Commerce
  5. A Ruggedized System for Measuring Extreme Winds

    SBC: Caregiver Technologies, Inc.            Topic: N/A

    We will develop technology, termed a Ruggedized Wind Measurement System (RWMS), to measure directly extreme winds with high space and time resolution, focusing on the winds that occur beneath hurricanes at land fall. This development effort will include design, fabrication of two prototype RWMS units, and a series of proof-of-concept demonstrations in strong mountain-induced downslope and severe t ...

    SBIR Phase I 1997 Department of Commerce
  6. ASSESSING AND INCREASING THE TESTABILITY OF OBJECT-ORIENTED SOFTWARE

    SBC: Cigital, Inc.            Topic: N/A

    SOFTWARE HAS BECOME EXPENSIVE; BY THE YEAR 2000, IT REPORTEDLY WILL BE A 2 TRILLION DOLLAR INDUSTRY WORLDWIDE. TO REDUCE COSTS, IT IS VITAL TO REUSE CODE. OBJECT-ORIENTED (00) LANGUAGES ARE TOUTED TODAY FOR THE EASE WITH WHICH SOFTWARE COMPONENTS WRITTEN IN THEM CAN BE REUSED. DUE TO THIS CHARACTERISTIC (ALONG WITH OTHER BENEFITS FO 00 SOFTWARE), SOFTWARE VENDORS ARE BEGINNING TO WRITE CRITICAL AP ...

    SBIR Phase II 1995 Department of Commerce
  7. RESISITVE HEAT CURED RESIN TRANSFER MOLDING OF ADVANCED COMPOSITES

    SBC: Conductive Composites Tech,inc            Topic: N/A

    WE PROPOSE TO DEVELOP A NEW METHOD OF RESIN TRANSFER MOLDING (RTM) FOR ADVANCED COMPOSITES MANUFACTURING IN WHICH THE HEAT REQUIRED FOR CURING IS PROVIDED BY PASSING AN ELECTRICAL CURRENT THROUGH ELECTRICALLY CONDUCTIVE GRAPHITE FIBERS IN THE PREFORM. THIS METHOD, WHICH WE DESIGNATE RESISTIVE-HEAT CURED RTM OR RHCRTM, WILL OFFER THE FOLLOWING ADVANTAGES OVER CONVENTIONAL RTM IN WHICH HEAT IS PROVI ...

    SBIR Phase II 1995 Department of Commerce
  8. Self-Monitoring Surveillance System for Prestressing Tendons

    SBC: Construction Technology            Topic: N/A

    N/A

    SBIR Phase I 1995 Nuclear Regulatory Commission
  9. Laser Polarimetric Apparatus for Rapid Emissivity Measurements on Pulse-Heated Materials

    SBC: Containerless Research, Inc.            Topic: N/A

    Laser polarimetric/ellipsometric methods have been employed in our laboratory for the measurement of the normal spectral emissivities of solid and liquid materials at elevated temperatures. In this approach, a polarized light source is incident on the surface of interest at oblique incidence, and the reflected polarization state is measured in about 0.5 ms. The optical properties of the surface, ...

    SBIR Phase II 1996 Department of Commerce
  10. Laser Polarimetric Apparatus for Rapid Emissivity Measurements on Pulse-Heated Materials

    SBC: Containerless Research, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Commerce
US Flag An Official Website of the United States Government