You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. Material Growth and Bandgap Engineering of DMS Crystals and Q-Switching and Isolation of Near/Mid IR Lasers

    SBC: American Research Corporation of Virginia            Topic: N/A

    Development of reliable (Q-) switching and isolation materials is being sought for near-to-mid infrared lasers for safety, extended life and fiber optic communication. The voltage or E-field controlled (Q-) switching materials such as Pockels cells and liquid Kerr cells are not reliable for long term operation in tactica applications due to crystal surface (e.g., KDP, ADP) degradation by moisture ...

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
  3. GaAs/GaN Strained Layer Superlattice Material for High Temperature Transistors

    SBC: Apa Optics, Inc.            Topic: N/A

    Electronic devices which operate at high temperatures could be used in many military and commercial systems. GaAs and Si based devices cannot operate at these temperatures and require cooling. Wide bandgap material such as diamond, SiC and GaN have greater breakdown voltages, higher operating temperatures, and higher saturated electron velocities than either GaAs or Si. However, these material sys ...

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
  4. Single Cell Carbide Fueled Thermionic Fuel Element

    SBC: Applied Sciences Inc.            Topic: N/A

    If you can't beat them, join them. Such is the philosophy of Space Exploration Associates, who hired the top talent in Russian and the new Republic of Georgia to develop advanced thermionic converters for SDIO. Unlike other highly publicized exchanged with the Russians, this work will be done in the US and no hardware will cross international lines. The metallurgical wizards from the East have con ...

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
  5. Joining Carbon Composite Fins to Titanium Heat Pipes

    SBC: Applied Sciences Inc.            Topic: N/A

    Everybody knows that composites have high strength, low density, and great thermal properties. They would be great for a number of applications such as fins for spacecraft radiators. So why aren't they used more on spacecraft thermal systems? One reason is joining technology. Although many methods such as brazing and adhesives have been developed for joining composites to metals, these methods are ...

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
  6. Solid State Neutron Detector

    SBC: Applied Sciences Inc.            Topic: N/A

    Phase I proposes to demonstrate an easy-to-operate, inexpensive room temperature neutron detector based on boron-doped diamond. The detector would produce an immediate signal related to low-level neutron irradiation. The concept exploits the high neutron absorption cross section of B-10, which results in excellent sensitivity. The charge carriers generated in the diamond by a neutron absorption ev ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  7. Solid State Neutron Sensor

    SBC: Applied Sciences Inc.            Topic: N/A

    Unexpected coupling between nuclear reaction cross sections and the solid state of metal deuterides has been demonstrated in layered Pd-PdO deuterided structures. As a result, high rates of charged particle and neutron measurements have been observed through a reaction initiated by altering the chemical state of the system. Moreover, the system acts as an amplifier of fast neutrons, with a 200-to- ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. A Novel Technique for Processing Advance Composites and Joining/Bonding Epoxy

    SBC: Applied Sciences Inc.            Topic: N/A

    The development of a microwave curing method for resin matrix composites and jointing/bonding epoxy is proposed. This technique will take advantage of the ability of vapor-grown carbon fiber (VGCF) to absorb microwave energy with high efficiency. By adding VGCF to resin matrix composite material and epoxy, we hope that the materials can be processed by microwave irradiation in a manner that result ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Object-Oriented Data Collection and Fusion

    SBC: Cybernet Systems Corporation            Topic: N/A

    This proposal suggests that a basic data collection, management, and fusion framework is ideally suited for integrating distributed data from multiple heterogeneous sources and making it available on a multi-point basis for analysis, viewing, and C**4I applications. The basic framework proposed was built (and is currently under ongoing development) to support object-oriented, temporally consistent ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Optical Techniques for Tbits/Second Communication

    SBC: CLARK-MXR, INC.            Topic: N/A

    This program will demonstrate key enabling technologies for Terabit/second optical fiber networks capable of meeting critical DoD needs. Optical network technology offers characteristics that satisfy many DoD requirements. These characteristics include improved data handling through multiwavelength transmission in single optical fibers; enhanced network security; greater inter-network operabilit ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government