Award Data

There is a need for accurate and cost effective airborne techniques to estimate fish biomass in the open ocean. Arete proposes to develop in Phase I optimal detection algorithms using existing imaging LIDAR data collected with the Fisheye(R) sensor. These algorithms will be developed to allow real-time detection of fish and fish schools, discrimination between fish and ambient clutter, and discr ...

American health care is in the midst of momentous change. Quality improvement principles are being used increasingly to enhance productivity and efficiency of health care delivery and to help contain costs. In producing patient outcomes and resource utilization measures, it is vital to control appropriately for case mix (i.e., differences in patients due, e.g., to illness severity) in the predicti ...

We will develop technology, termed a Ruggedized Wind Measurement System (RWMS), to measure directly extreme winds with high space and time resolution, focusing on the winds that occur beneath hurricanes at land fall. This development effort will include design, fabrication of two prototype RWMS units, and a series of proof-of-concept demonstrations in strong mountain-induced downslope and severe t ...

Domain modeling and automated software construction offers significant potential for rapidly producing high quality software systems within many application domains, specially in mature and stable application domains where many variations of similar systems are generated. There is now a clear opportunity to leverage off the work that has already been done in constructing domain-engineering suppor ...

This proposal addresses development of CAD software for simulating non-linear optical materials. The software will provide a virtual lab in which experimental setups are simulated. The proposed software is based on the use of a Maxwell differential equation solver, the Finite Difference Time Domain (FDTD) method. This numerical method has been developed by numerous researchers since 1968 and no ...

We propose to characterize the early stage of consolidation of non-spherical powders to further the development of process models to enable simulation of powder metallurgy manufacturing for the consumer market, especially the automotive industry. Typically, spherical powders with a narrow size distribution are used for aerospace applications, while low-cost powders with irregular shapes and a wide ...

This proposal describes a new research program to be established at the small business Still Sciences, LLC, in collaboration with Department of Physics of Oklahoma State University. The overall goal is to develop and commercialize an all-optical dosimetry system for industrial radiation processing based on a novel Pulsed Optically Stimulated Luminescence readout technique and a new Al2O3 material ...

The accurate measurement of fluid densities flowing in pipes is important for custodial monitoring of valuable and/or controlled substances. Most on-line fluid flow meters require independent determination of the fluid density while Coriolis type meters, which directly measure the fluid mass, are off-lie devices. HY-Tech is proposing to develop a laser based diagnostic techique for measuring the ...

The overall quality and the comprehensive strength, in particular, of concrete are critically dependent on the water content in the concrete mixture. It is also essential to know if the concrete has reached a stage of moisture equilibrium before surface finishes such as paint or carpet can be applied. At present, no reliable method or easy-to-use instrument exists for determining the moisture co ...

A new method for constructing heat flux sensors of the differential thermopile type will be developed to produce sensors for testing building components. The new sensors will be thin, readily attached to structures such as walls, floors and roofs, and will have sufficiently low thermal resistance to enable accurate measurements of heat flux and temperature over the full range of building componen ...