You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Electromagnetic Resonance Sensors for Determination of Moisture Content in Concrete

    SBC: American Research Corporation of Virginia            Topic: N/A

    The overall quality and the comprehensive strength, in particular, of concrete are critically dependent on the water content in the concrete mixture. It is also essential to know if the concrete has reached a stage of moisture equilibrium before surface finishes such as paint or carpet can be applied. At present, no reliable method or easy-to-use instrument exists for determining the moisture co ...

    SBIR Phase I 1995 Department of Commerce
  2. A Ruggedized System for Measuring Extreme Winds

    SBC: Caregiver Technologies, Inc.            Topic: N/A

    We will develop technology, termed a Ruggedized Wind Measurement System (RWMS), to measure directly extreme winds with high space and time resolution, focusing on the winds that occur beneath hurricanes at land fall. This development effort will include design, fabrication of two prototype RWMS units, and a series of proof-of-concept demonstrations in strong mountain-induced downslope and severe t ...

    SBIR Phase I 1997 Department of Commerce
  3. Ultrafast Compact Laser Source for Non-Linear Optical Diagnostics

    SBC: CLARK-MXR, INC.            Topic: N/A

    The goal of this program is to develop compact, reliable lasers producing intense (millijoule) femtosecond pulses at high repetition rates. These lasers will be designed to operate in industrial environments and will be ideally suited for non-linear optical diagnostics. During the Phase I we will demonstrate that diode-pumped fiber lasers can generate reliably ultrashort pulses, and that their ...

    SBIR Phase I 1995 Department of Commerce
  4. Use of Very High Frequency Plasmas to Prepare a-SiGe Alloy Photovoltaic

    SBC: ENERGY CONVERSION DEVICES, INC.            Topic: N/A

    The program objective is to investigate the feasibility of using a very high frequency (VHF) [70 MHz] plasma technique to produce high efficiency a-SiGe:H solar cells at relatively high deposition rates. Using the VHF technique, high quality a-SiGe:H material is expected due to enhanced low energy ion bombardment of the growing film surface which has been found to be beneficial to the growth of th ...

    SBIR Phase I 1997 Department of Commerce
  5. Controlled Spawning and Larviculture of Florida Pompano

    SBC: HarvestFresh Seafoods, Inc.            Topic: N/A

    Development of technology for the predictable, natural spawning of captive Florida pompano (Trachinotus carolinus) utilizing photoperiod and temperature manipulation is propose, along with the subsequent larval rearing and fingerling production through a joint effort between HarvestFresh Seafoods, Inc., and the Department of Wildlife and Fisheries Sciences at Texas A&M University. The pompano is a ...

    SBIR Phase I 1997 Department of Commerce
  6. Simple Optical Vibration Sensor for Small Objects

    SBC: LIGHTWORKS, LLC            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Commerce
  7. Development of A1203 Detector Material and OSL Dosimetric Technique for

    SBC: Stillwater Sciences, L.L.C.            Topic: N/A

    This proposal describes a new research program to be established at the small business Still Sciences, LLC, in collaboration with Department of Physics of Oklahoma State University. The overall goal is to develop and commercialize an all-optical dosimetry system for industrial radiation processing based on a novel Pulsed Optically Stimulated Luminescence readout technique and a new Al2O3 material ...

    SBIR Phase I 1997 Department of Commerce
  8. A Total Quality Self-Assessment Toolkit

    SBC: TECHNOLOGY INTERNATIONAL INCORPORATED OF VIRGINIA            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Commerce
  9. Heat Flux Instrumentation for Building Components

    SBC: Vatell Corporation            Topic: N/A

    A new method for constructing heat flux sensors of the differential thermopile type will be developed to produce sensors for testing building components. The new sensors will be thin, readily attached to structures such as walls, floors and roofs, and will have sufficiently low thermal resistance to enable accurate measurements of heat flux and temperature over the full range of building componen ...

    SBIR Phase I 1995 Department of Commerce
  10. Synthesis of Ultrafine Silicon Carbide

    SBC: Materials Modifications Inc.            Topic: N/A

    Nanosize, non-oxide ceramic powders such as silicon carbide and its composites, are desirable for use as components in high-power microelectronic devices and tubes, sensors, optical mirrors, filters, nozzles, panels and sheets in many energy related applications. The properties required for these applications include high-temperature strength, high thermal conductivity, low thermal expansion, lig ...

    SBIR Phase I 1995 Department of Commerce
US Flag An Official Website of the United States Government