You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Nondestructive Measurements of Key Mechanical Properties of Alloy 718 Welded Structures Using Novel Stress-Strain Microprobe Technology

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    33 Nondestructive Measurements of Key Mechanical Properties of Alloy 718 Welded Structures Using Novel Stress-Strain Microprobe Technology--Advanced Technology Corporation, 661 Emory Valley Road, Suite A, Oak Ridge, TN 37830-7751; (423) 483-5756 Mr. Fahmy M. Haggag, Principal Investigator Mr. Fahmy M. Haggag, Business Official DOE Grant No. DE-FG02-97ER82316 Amount: $75,000 Nickel-based super ...

    SBIR Phase I 1997 Department of Energy
  2. In-Situ Nondestructive Measurements of Key Mechanical Properties of Reactor Pressure Vessels Using Innovative SSM Technology

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Energy
  3. A RECUPERATOR FOR CRYOCOOLERS

    SBC: Almatech            Topic: N/A

    THIS PROJECT INVOLVES DEVELOPMENT AND VERIFICATION OF THE PERFORMANCE OF A NOVEL HEAT EXCHANGER OPERATING IN THE 98 TO 99 PERCENT THERMAL EFFECTIVENESS RANGE. HEAT EXCHANGERS FOR CRYOCOOLER APPLICATIONS USED IN HIGH ENERGY PHYSICS, REMOTE SENSING, ETC., FREQUENTLY REQUIRE THERMAL EFFECTIVENESS OF OVER 98%. THIS IS DIFFICULT TO ACCOMPLISH,PRIMARILY BECAUSE OF THE EFFECT OF THE LONGITUDINAL THERMAL ...

    SBIR Phase I 1988 Department of Energy
  4. Template-Medicated Synthesis of Periodic Membranes for Improved Liquid-Phase Separations

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Energy
  5. IN-SITU RESPONSE TIME TESTING OF NUCLEAR PLANT PRESSURE SENSORS

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N/A

    THE DEVELOPMENT OF NOISE ANALYSIS FOR IN-SITU RESPONSE TIME TESTING OF SAFETY SYSTEM PRESSURE SENSORS IN NUCLEAR POWERPLANTS IS UNDER WAY. THE TECHNIQUE IS BASED ON RECORDING THE NATURALLY OCCURRING FLUCTUATIONS THAT EXIST AT THE OUTPUT OF PRESSURE SENSORS AS THE PLANT IS OPERATING. THESE FLUCTUATIONS CAN BE ANALYZED TO GIVE THE SENSOR TRANSFER FUNCTION FROM WHICH THE SENSOR RESPONSE CAN BE DETERM ...

    SBIR Phase I 1988 Department of Energy
  6. NEW SENSOR FOR MEASUREMENT OF AIR MOVEMENT

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N/A

    THIS PROPOSAL IS PREPARED IN DIRECT RESPONSE TO THE NRC'S SOLICITATION FOR AN IMPROVED DEVICE TO MEASURE AIR MOVEMENT FOR PERSONNEL RADIATION PROTECTION AND HEALTH PHYSICS APPLICATIONS IN NUCLEAR FACILITIES. THE PURPOSE OF THE NEW DEVICE IS TO PROPERLY LOCATE AIR SAMPLERS SO THAT THE AIR SAMPLED IS REPRESENTATIVE OF THE AIR INHALED BY WORKERS. ALTHOUGH AIR FLOW RATE SENSORS SUCH AS ANEMOMETERS ARE ...

    SBIR Phase I 1994 Nuclear Regulatory Commission
  7. ASSESSMENT OF SMART SENSOR TECHNOLOGIES FOR CONVENTIONAL ANDADVANCED LWRS

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1991 Nuclear Regulatory Commission
  8. EFFECT OF AGING ON RESPONSE TIME OF NUCLEAR PLANT PRESSURE SENSORS

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1988 Nuclear Regulatory Commission
  9. EXPERIMENTAL EVALUATION OF FIBER OPTIC PRESSURE SENSORS FOR NUCLEAR POWER PLANTS

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1994 Nuclear Regulatory Commission
  10. Design, Development, and Fabrication of Hybrid High Temperature Superconducting Current Leads

    SBC: American Magnetics, Inc.            Topic: N/A

    40642 November 12, 1996 American Magnetics, Inc. High temperature superconducting (HTS) current leads are important to products such as magnetic resonance imaging systems where they are used to minimize heat loads. However, the leads have virtually nonexistent current carrying capabilities while operating within magnetic fields, and they are fragile, br ...

    SBIR Phase I 1996 Department of Energy
US Flag An Official Website of the United States Government