You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Economical and Reliable Adaptive Disturbance Cancellation for Lightly Damped Systems
SBC: PLANNING SYSTEMS, INC. Topic: N/AEfforts to apply active noise and vibration control commercially, while intensifying, continue to be hampered by the cost of the computers required to implement the active algorithms. Currently, the cost of wide-band control is prohibitive for lightly damped systems such as precision structures or highly reverberant acoustic spaces, even if the system has just one canceling actuator and one error ...
SBIR Phase I 1997 Department of DefenseAir Force -
Environmentally Safe, In Situ Surface-Protection of Carbon Steel Structures
SBC: ACCURATE AUTOMATION CORPORATION Topic: N/AA special purpose robot to remove corrosion from the interior surfaces of the ductwork in AEDC's Engine Test Facility (ETF) will be designed and developed. The robot willimplemnt the Laser Induced Surface Improvement (LISI) process which alloys the interior surface of the ductwork with a chromimum compound. The system will include a remotely operated robot capable of traversing the ETF ductwork, ...
SBIR Phase I 1997 Department of DefenseAir Force -
Processing of Selectively-Discontinuous-Fiber (SDF) Composite Materials
SBC: Advanced Composite Operations Topic: N/AThis proposal is directed at creating discontinuous unidirectional composite from continuous unidirectional prepreg. The process, Selectively-Discontinuous-Fiber (SDF), introduces micro-cuts in preimpregnated unidirectional materials at specified locations. This process will allow unidirectional composite prepreg to be used for the fabrication of complex-compound components that have be ...
SBIR Phase I 1996 Department of DefenseAir Force -
Coherent Burst Ranging
SBC: Consultec Scientific Topic: N/AN/A
SBIR Phase I 1996 Department of DefenseAir Force -
Flight Control Technology
SBC: DIGITAL SYSTEM RESOURCES, INC. Topic: N/AThe Air Force has identified the need to develop affordable flight control technology to support Air Force Global Engagement objectives. Of particular interest to the Air Force is the development of real-time optimization algorithms for cooperative engagement solutions among Uninhabited Air Vehicles (UAV) in a multiple target environment. DSR proposes developing a real-time, rule based, Cooperat ...
SBIR Phase I 1997 Department of DefenseAir Force -
Rechargeable Lithium-ion Cells Containing Ambient Temperature Molten Salts
SBC: Electrochemical Systems, Inc. Topic: N/AFeasibility of rechargeable lithium-ion cells utilizing two ambient temperature molten salt electrolytes will be investigated. The anions of these electrolytes will be resistant to oxidation; the cation of one of the electrolytes will be resistant to both oxidation and reduction; therefore, in such electrolytes both cathode and anode will be electrochemically stable. The electrolytes will be pre ...
SBIR Phase I 1997 Department of DefenseAir Force -
Novel Pulsed Nitrogen Source Diagnostic for GaN Thin Film Stoichiometry Control
SBC: IONWERKS INC Topic: N/AN/A
SBIR Phase I 1996 Department of DefenseAir Force -
A Comprehensive System for the Prevention and Remediation of Biofilms in Dental Equipment
SBC: LYNNTECH INC. Topic: N/AThere is a substantial body of evidence demonstrating that biofilms growing inside the water lines of dental units pose a significant risk as a source of infection. The problem has been recognized by practitioners, regulators, manufacturers, and the ADA, with the ADA proposing a set of guidelines for water quality that include a limit of 200 colony forming units per milliliter for the year 2000. ...
SBIR Phase I 1997 Department of DefenseAir Force -
A Fiber Optic Electrochemiluminescence Sensor for the Detection of Organic Pollutants and Trace Metals i
SBC: LYNNTECH INC. Topic: N/AChemiluminescence is a powerful analytical technique that exhibits high sensitivity and selectivity. This technique when coupled with electrolysis is greatly advantageious over the conventional methods as the reagents are produced in situ at the electrode. The presence of trace amounts of solvents such as TCE, PCE, methylene chloride and carbon tetrachloride can be monitored using the method of ...
SBIR Phase I 1997 Department of DefenseAir Force -
Automated Long Taper Hone
SBC: REINHART & ASSOC., INC. Topic: N/AThe prototype of an automated computer controlled precision hone will be built and evaluated in Phase I. The prototype hone will evaluate in situ bore measurement as a means to reduce the overall time required for maintenance honing of long tapered bores currently in use at a government facility. The measurement system would be used as a feedback signal to control the honing head's forward progr ...
SBIR Phase I 1997 Department of DefenseAir Force