You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Economical and Reliable Adaptive Disturbance Cancellation for Lightly Damped Systems

    SBC: PLANNING SYSTEMS, INC.            Topic: N/A

    Efforts to apply active noise and vibration control commercially, while intensifying, continue to be hampered by the cost of the computers required to implement the active algorithms. Currently, the cost of wide-band control is prohibitive for lightly damped systems such as precision structures or highly reverberant acoustic spaces, even if the system has just one canceling actuator and one error ...

    SBIR Phase I 1997 Department of DefenseAir Force
  2. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Flight Control Technology

    SBC: DIGITAL SYSTEM RESOURCES, INC.            Topic: N/A

    The Air Force has identified the need to develop affordable flight control technology to support Air Force Global Engagement objectives. Of particular interest to the Air Force is the development of real-time optimization algorithms for cooperative engagement solutions among Uninhabited Air Vehicles (UAV) in a multiple target environment. DSR proposes developing a real-time, rule based, Cooperat ...

    SBIR Phase I 1997 Department of DefenseAir Force
  5. A Job Performance Measurement System

    SBC: Research Development Corporation            Topic: N/A

    As organizations move toward increased performance measurement and accountability, there is an increasing need to measure job performance at the individual worker level. Traditional assessment tools have been criticized as measuring test taking skills more than job performance skills. A number of approaches have been developed to address this weakness by measuring performance in practical proble ...

    SBIR Phase I 1997 Department of DefenseAir Force
  6. Hydrogen Supply System for Small Proton Exchange Membrane (PEM) Fuel Cell Stacks

    SBC: Royal Systems/ Associated            Topic: N/A

    1. A conceptual baseline design of a hydrogen supply system with a on/off capability will be prepared for delivering hydrogen in increments of up to 10g/hour with a total capacity of 120g hydrogen. This baseline design will be based upon a solid state hydrogen reactant mixture with a yield of 8% by reactant weight which has been previously qualified for military use. ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  7. A Gallium Arsenide Synchronous Rectified-based Low Voltage Power Converter for High Radiation Environments

    SBC: Virginia Power Technologies            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  8. An Advanced Sensor For Field Characterization of Operational Laser Systems

    SBC: WAVEFRONT SCIENCES, INC.            Topic: N/A

    To field characterize laser systems the laser power, beam divergence, intensity profile and spot size of the laser must be measured with a robust, vibration insensitive system. While some of these parameters can be obtained using conventional components, beam divergence is difficult to measure because of the complexity and vibration sensitivity of typical interferometry based elements. We propos ...

    SBIR Phase I 1997 Department of DefenseAir Force
  9. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: T P L, INC            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. Abductive Electronics Prognostic Tool (ADEPT)

    SBC: ABTECH CORPORATION            Topic: N/A

    AbTech Corporation proposes to apply its unique Statistical Network ModelingTM technology to develop a non contact prognostic assessment tool that 1) acquires, processes, and analyzes electronic radiated signal data, 2) learns the expected characteristics and patterns of specific radiated signals measured from microelectronic semiconductor devices using AbTech's statistical network modeling techno ...

    SBIR Phase I 1997 Department of DefenseAir Force
US Flag An Official Website of the United States Government