You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  3. Fully Automated Bearing Residual Life Prognosis Wireless Sensor

    SBC: Johnson Research & Development Co Inc            Topic: N/A

    This research project investigates natural and non-natural energy sources available in the environment that can be scavenged to provide electrical power. The sources considered are: thermal, barometric pressure, acoustic, humidity, water, wind, solar andelectromotive (low frequency and radio frequency waves). Most existing techniques for scavenging power are built around ideal environments. For e ...

    SBIR Phase I 2001 Department of DefenseOffice of the Secretary of Defense
  4. Hydrogen Supply System for Small Proton Exchange Membrane (PEM) Fuel Cell Stacks

    SBC: Royal Systems/ Associated            Topic: N/A

    1. A conceptual baseline design of a hydrogen supply system with a on/off capability will be prepared for delivering hydrogen in increments of up to 10g/hour with a total capacity of 120g hydrogen. This baseline design will be based upon a solid state hydrogen reactant mixture with a yield of 8% by reactant weight which has been previously qualified for military use. ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. Lightweight Trauma Module

    SBC: Excellatron Solid State, LLC            Topic: N/A

    We propose to develop a new type of primary lithium battery using an available polymer lithium ion battery technology. We will use manganese dioxide-polymer matrix as the cathode, lithium ion containing polymer as the electrolyte and lithium as the anode.The plastic lithium primary battery will combine the advantages of lithium primary batteries and plastic lithium ion rechargeable batteries. This ...

    SBIR Phase I 2001 Department of DefenseOffice of the Secretary of Defense
  6. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: T P L, INC            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Three energy sources that will work in a cold, dark, static environment

    SBC: Nanosonic Inc.            Topic: N/A

    The purpose of the proposed OSD Phase I program is to develop and commercialize novel tissue solders based on a biodegradable copolymer system that contains a controlled degree of acrylate-terminated photoactive branch sites. This will result in a processthat, with the addition of a biocompatible and non-toxic photosensitizer/electron donor initiating system, will rapidly cure from a viscous liqui ...

    SBIR Phase I 2001 Department of DefenseOffice of the Secretary of Defense
  8. HLA Federation Implementation Tools

    SBC: SYNETICS, INC.            Topic: N/A

    Developing a set of tools that is automated, integrated, and compliant with the deired goals of this SBIR is not a simple task. If a coordinated approach is not taken from the start, then a hodgepodge of tools and capabilities for a hodgepodge of environments wil be developed with unwanted outcome of falling short of the desired goals. Therefore, SYNETICS proposes to establish a CASE-like enviro ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Toolbox/Intelligent Advisor for Creating Pedagogically Correct,

    SBC: MANAGEMENT SCIENCES INC            Topic: N/A

    This SBIR will perform research leading to design, prototyping, and feasibility demonstration of an Inactive RF Tag made with a Radio Frequency Micro-Electro-Mechanical Systems (RF-MEMS) as a means to provide power scavenging in a power poor environmentfound in underground missile storage areas. The research will develop the use of RF-MEMS switches in conjunction with RF MEMS sensors as a means t ...

    SBIR Phase I 2001 Department of DefenseOffice of the Secretary of Defense
  10. Battery Optimized for Long Term Storage and Intermittent Use

    SBC: SIGMA SYSTEMS RESEARCH, INC.            Topic: N/A

    The objective of this effort is to develop an integrated system for Patient-Clinician Encounter Information Visualization Model (PCEIVM) that will exhibit a mechanism of intelligent interactivity. The project will explore advanced 3D visualizationinterface techniques that incorporate adaptive patient encounter models as well as machine reasoning about the immediate information needs of clinicians. ...

    SBIR Phase I 2001 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government