You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. PULSE DETONATION SYNTHESIS FOR HIGH TEMPERATURE CERAMIC COMPOSITES AND COATINGS

    SBC: Adroit Systems, Inc.            Topic: N/A

    Adroit Systems, Inc. will develop a Pulse Detonation Synthesis (PDS) process to manufacture ceramic powders from gas-powder reactant mixtures more efficiently and inexpensively than current methods. A high combustion rate and simple design make the PDS system capable of mass producing these powders, which are used as raw materials for high-temperature, high-performance ceramics and ceramic composi ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  2. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. NEW SENSOR FOR MEASUREMENT OF AIR MOVEMENT

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N/A

    THIS PROPOSAL IS PREPARED IN DIRECT RESPONSE TO THE NRC'S SOLICITATION FOR AN IMPROVED DEVICE TO MEASURE AIR MOVEMENT FOR PERSONNEL RADIATION PROTECTION AND HEALTH PHYSICS APPLICATIONS IN NUCLEAR FACILITIES. THE PURPOSE OF THE NEW DEVICE IS TO PROPERLY LOCATE AIR SAMPLERS SO THAT THE AIR SAMPLED IS REPRESENTATIVE OF THE AIR INHALED BY WORKERS. ALTHOUGH AIR FLOW RATE SENSORS SUCH AS ANEMOMETERS ARE ...

    SBIR Phase I 1994 Nuclear Regulatory Commission
  4. EXPERIMENTAL EVALUATION OF FIBER OPTIC PRESSURE SENSORS FOR NUCLEAR POWER PLANTS

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1994 Nuclear Regulatory Commission
  5. MULTI LEVEL SECURE IMAGE OPERATING SYSTEM

    SBC: ARIES Technology Corporation            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  6. OPTIMAL ENERGY MANAGEMENT FOR KINETIC ENERGY WEAPONS

    SBC: BARRON ASSOCIATES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseMissile Defense Agency
  7. Nitride, Carbide and Non-Oxide In Situ Coatings Using RECVD,A New CVD Method

    SBC: CCVD, Inc dba MicroCoating Technologies (MCT)            Topic: N/A

    Currently, thermal spray (flame and plasma spray) is the only single step method of applying most metal and non-oxide ceramic coatings to large objects. These coatings are usually of a low quality, and thin films cannot be applied. An in situ deposition technique that inexpensively and easily applies nitrides, carbides and other non-oxide thin or thick films in an environmentally friendly manner i ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. Production Friendly GaN Coatings Using RECVD, a New CVD Method

    SBC: CCVD, Inc dba MicroCoating Technologies (MCT)            Topic: N/A

    Currently vacuum based methods of PVD and CVD are the only processes for forming GaN thin films and coatings. These methods are usually expensive and are not applied in a production friendly manner. An atmospheric deposition technique that inexpensively and easily applies GaN thin or thick films in an environmentally friendly manner is a priority for any number of DOD and commercial applications. ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. LOW COST MULTILAYERED PZT CAPACITORS MADE USING CCVD

    SBC: CCVD, Inc dba MicroCoating Technologies (MCT)            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  10. Powder Synthesis and Bulk Crystal Growth of Gallium Nitride

    SBC: CERMET, INC.            Topic: N/A

    The primary goal of Phase I work is to demonstrate the feasibility of synthesizing gallium nitride (GaN) powder. Secondarily, this powder will be used to grow high-purity single crystals of GaN from a liquid GaN phase. This would be accomplished using a proprietary variation of the skull melting technique. Since GaN demonstrates peritectic-type decomposition at atmospheric pressure, the entire sku ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government