You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. PULSE DETONATION SYNTHESIS FOR HIGH TEMPERATURE CERAMIC COMPOSITES AND COATINGS

    SBC: Adroit Systems, Inc.            Topic: N/A

    Adroit Systems, Inc. will develop a Pulse Detonation Synthesis (PDS) process to manufacture ceramic powders from gas-powder reactant mixtures more efficiently and inexpensively than current methods. A high combustion rate and simple design make the PDS system capable of mass producing these powders, which are used as raw materials for high-temperature, high-performance ceramics and ceramic composi ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  2. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. Mission Flexible, Low Cost, Suborbital Launch Vehicle

    SBC: AEROASTRO, INC.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of DefenseMissile Defense Agency
  4. High Performance Arcjet Engines

    SBC: Applied Sciences Inc.            Topic: N/A

    IT IS PROPOSED THAT ADVANCED ARCJET ENGINES CAN BE DEVELOPED USING KNOWN PRINCIPLES FOR ADVANCED NOZZLE DESIGN, ARC ATTACHMENT, INCREASED CHAMBER EFFECTIVE TEMPERATURE AND SO FORTH. SUCH STUDIES ARE PARTIALLY SUPPORTED BY EXPERIMENTAL RESULTS BY RESEARCHERS IN THE RUSSIAN FEDERATION. YET THESE PRINCIPLES RESULT IN INCREASED HEATING OF THE ANODE, AS THE ARC MORE EFFECTIVELY HEATS THE ANODE. THIS CA ...

    SBIR Phase I 1993 Department of DefenseMissile Defense Agency
  5. Thermionic Nuclear Thermal Propulsion Bimodal Reactor

    SBC: Applied Sciences Inc.            Topic: N/A

    BIMODAL REACTORS FOR POWER AND PROPULSION HAVE LONG BEEN OF INTEREST FOR MISSIONS REQUIRINGS BOTH HIGH POWER AND LARGE DELTA-V; E.G., HIGH ALTITUDE, GEOSYNCHRONOUS AND PLANETARY MISSIONS. IT PROPULSIVE THRUST AND ELECTRIC POWER CAN BOTH BE SUPPLIED FROM THE SAME UNIT, A LARGE POTENTIAL SAVINGS CAN OCCUR. SUCH A REACTOR CAN BE DEVELOPED FROM A URANIUM CARBIDE FUELED THERMIONIC REACTOR WITH SINGLE C ...

    SBIR Phase I 1993 Department of DefenseMissile Defense Agency
  6. Solid State Neutron Detector

    SBC: Applied Sciences Inc.            Topic: N/A

    Phase I proposes to demonstrate an easy-to-operate, inexpensive room temperature neutron detector based on boron-doped diamond. The detector would produce an immediate signal related to low-level neutron irradiation. The concept exploits the high neutron absorption cross section of B-10, which results in excellent sensitivity. The charge carriers generated in the diamond by a neutron absorption ev ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  7. Solid State Neutron Sensor

    SBC: Applied Sciences Inc.            Topic: N/A

    Unexpected coupling between nuclear reaction cross sections and the solid state of metal deuterides has been demonstrated in layered Pd-PdO deuterided structures. As a result, high rates of charged particle and neutron measurements have been observed through a reaction initiated by altering the chemical state of the system. Moreover, the system acts as an amplifier of fast neutrons, with a 200-to- ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. A Novel Technique for Processing Advance Composites and Joining/Bonding Epoxy

    SBC: Applied Sciences Inc.            Topic: N/A

    The development of a microwave curing method for resin matrix composites and jointing/bonding epoxy is proposed. This technique will take advantage of the ability of vapor-grown carbon fiber (VGCF) to absorb microwave energy with high efficiency. By adding VGCF to resin matrix composite material and epoxy, we hope that the materials can be processed by microwave irradiation in a manner that result ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. MULTI LEVEL SECURE IMAGE OPERATING SYSTEM

    SBC: ARIES Technology Corporation            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  10. OPTIMAL ENERGY MANAGEMENT FOR KINETIC ENERGY WEAPONS

    SBC: BARRON ASSOCIATES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government