You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes
SBC: American Research Corporation of Virginia Topic: N/AN/A
SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense -
Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition
SBC: Cm Consulting Topic: N/AThe final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
EMP AND HPM SUPPRESSION TECHNIQUES
SBC: Integrated Sciences Topic: N/ASurvival of present day microelectronic circuits depends on their protection from self generated and external electromagnetic interference. This proposal is oriented toward the class of interference generally referred to as overvoltage transients. Means for mitigating these transients include gas discharge tubes, and various solid state devices. Each of these has their own advantages in particu ...
SBIR Phase I 1996 Department of DefenseDefense Threat Reduction Agency -
Hydrogen Supply System for Small Proton Exchange Membrane (PEM) Fuel Cell Stacks
SBC: Royal Systems/ Associated Topic: N/A1. A conceptual baseline design of a hydrogen supply system with a on/off capability will be prepared for delivering hydrogen in increments of up to 10g/hour with a total capacity of 120g hydrogen. This baseline design will be based upon a solid state hydrogen reactant mixture with a yield of 8% by reactant weight which has been previously qualified for military use. ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
Porous Sol-Gel Derived Ceramic Release Agent
SBC: TPL, INC Topic: N/ABreathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...
SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense -
HLA Federation Implementation Tools
SBC: SYNETICS, INC. Topic: N/ADeveloping a set of tools that is automated, integrated, and compliant with the deired goals of this SBIR is not a simple task. If a coordinated approach is not taken from the start, then a hodgepodge of tools and capabilities for a hodgepodge of environments wil be developed with unwanted outcome of falling short of the desired goals. Therefore, SYNETICS proposes to establish a CASE-like enviro ...
SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense -
Low Cost, Portable X-Ray Simulator Development
SBC: North Star Research Corp. Topic: N/AWe propose, in Phase I and Phase II, to build an X-ray simulator capable of easy transportation between sites which can be built for a low cost (
SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency -
Development of a Commercial Multiple Degree of Freedom Measurement System
SBC: American Research Corporation of Virginia Topic: N/AThe Multiple Degree of Freedom Measurement (MDFM) System, developed under Wright Laboratory, has been identified as having strong commercial potential as a significant enhancement to existing products in the machine tool industry for machine tool calibration or coordinate measuring machine enhancement. The MDFM is in need of revision to incorporate state-of-the-art technology, to prepare the devi ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
SMART SENSORS USING OPTICAL FIBER INTERCONNECTS AND DISTRIBUTED MEMS
SBC: LUNA INNOVATIONS INCORPORATED Topic: N/AN/A
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
Parallel Optical Memory Interconnects
SBC: LSA Topic: N/AIn this proposal, we describe a novel approach for realizing a parallel, nonmechical, read/write interconnection for angle-multiplexed three-dimensional (3-D) optical memories. Our concept represents a significant first step required toward taking this critical memory technology from the laboratory and inserting it into operational systems. The concept utilizes novel optomechanical packaging and ...
SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense