You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Process-Based Assurance Product Suite

    SBC: Arca Systems, Inc.            Topic: N/A

    Arca proposes research leading to development of a suite of methodology support products to help meet the need for innovative assurance techniques appropriate for emerging information technologies. The product will consist of a licensable methodology and supporting materials for specifying, building, and evaluating assurance arguments for products and systems based on the capability of security en ...

    SBIR Phase I 1997 Department of Commerce
  2. Algorithms for Health Care Quality Management and Outcomes Assessment

    SBC: BARRON ASSOCIATES, INC.            Topic: N/A

    American health care is in the midst of momentous change. Quality improvement principles are being used increasingly to enhance productivity and efficiency of health care delivery and to help contain costs. In producing patient outcomes and resource utilization measures, it is vital to control appropriately for case mix (i.e., differences in patients due, e.g., to illness severity) in the predicti ...

    SBIR Phase I 1997 Department of Commerce
  3. A Ruggedized System for Measuring Extreme Winds

    SBC: Caregiver Technologies, Inc.            Topic: N/A

    We will develop technology, termed a Ruggedized Wind Measurement System (RWMS), to measure directly extreme winds with high space and time resolution, focusing on the winds that occur beneath hurricanes at land fall. This development effort will include design, fabrication of two prototype RWMS units, and a series of proof-of-concept demonstrations in strong mountain-induced downslope and severe t ...

    SBIR Phase I 1997 Department of Commerce
  4. ASSESSING AND INCREASING THE TESTABILITY OF OBJECT-ORIENTED SOFTWARE

    SBC: Cigital, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of Commerce
  5. A Spray Nozzle with Electrically Controllable Spray Characteristics

    SBC: Fluid Jet Associates            Topic: N/A

    In the conduction of benchmark combustion experiments, a fuel spray nozzle that produces a steady-well-defined spray is needed. This fuel spray, of known properties, is a boundary condition for the atomization, mixing, and combustion which results throughout the combustor volume. Present spray nozzles use fluid turbulence, which is chaotic, to drive the spray formation. Because the turbulence ampl ...

    SBIR Phase I 1997 Department of Commerce
  6. XRD Integral Method Determination of the Triaxial Residual Stress Field

    SBC: Lambda Research            Topic: N/A

    Finish machining of structural ceramics can produce residual stresses, and subsurface defects (SSD) acting as stress concentrators, in the near-surface material. Residual stresses and SSD produced by machining affect the mechanical properties of ceramic components. In this context, it is essential that the residual stresses be properly quantified in ceramics, in order to establish suitable machini ...

    SBIR Phase I 1997 Department of Commerce
  7. Characterization of Consolidation of Non-Spherical Powders

    SBC: MATSYS INCORPORATED            Topic: N/A

    We propose to characterize the early stage of consolidation of non-spherical powders to further the development of process models to enable simulation of powder metallurgy manufacturing for the consumer market, especially the automotive industry. Typically, spherical powders with a narrow size distribution are used for aerospace applications, while low-cost powders with irregular shapes and a wide ...

    SBIR Phase I 1997 Department of Commerce
  8. Manufacturing Framework Integration of CMMs Via Emerging Standard for

    SBC: Object Workshops, Inc.            Topic: N/A

    New work is in progress on a CORBA interface standard for online interactive communication with DMIS-based Coordinate Measurement Machines (CMMs). This work is being pursued for submission to CAM-I via a recently organized object technology working committee of the North American DMIS Users Group. We will explore how to build upon this work for integration with existing manufacturing frameworks, e ...

    SBIR Phase I 1997 Department of Commerce
  9. COMBINED OBJECT-ORIENTED AND NEURAL NETWORK APPROACHES FOR SPATIAL DATA MODELS

    SBC: Quba Inc.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of Commerce
  10. A Step/Corba Framework for Integrating Manufacturing Specifications with

    SBC: RENAISSANCE SERVICES INC            Topic: N/A

    While much of the data involved in product and order definition has been captured in standard electronic structures such as IGES and EDI, material and process specifications are still handled as amorphous, paper-based documents. The use of manual, text-based specifications is an extremely labor-intensive and time-consuming process. Specifications are an integral part of the product and order defin ...

    SBIR Phase I 1997 Department of Commerce
US Flag An Official Website of the United States Government