You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Development of a Compact Electron Beam Accelerator

    SBC: MICROWAVE TECHNOLGIES, INC.            Topic: N/A

    Microwave Technologies Incorporated is proposing the development of a very compact radio-frequency (rf) electron beam accelerator which appears to be well-suited for BMDO's directed energy applications. This novel concept employs a single short rf cavity operating in circular polarization to accelerate a low-energy ma ~netized pencil beam to energies that range from 2 to 10 MeV. The proposed accel ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  2. Inorganic Confromal Coatings for SIC Packaging

    SBC: T P L, INC            Topic: N/A

    Glass is an attractive material for microelectronic packaging because it is hermetically sealing, has a low coefficient of thermal expansion, and is compatible with d.c. circuits. Unfortunately, the working temperature of glass is too high for this application. Low-temperature processing of a sol-gel derived, aluminosilicate material for hermetic seals is proposed for electronic packaging. This ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  3. SIDEBAND SUPPRESSION IN HIGH POWER FREE ELECTRON LASERS

    SBC: MISSION RESEARCH CORP.            Topic: N/A

    A SELF-REGENERATIVE FEEDBACK TECHNIQUE IS BEING INVESTIGATEDTO SUPPRESS THE FORMATION OF SIDEBANDS THAT LIMIT THE SPECTRAL BRIGHTNESS AND GENERAL PERFORMANCE OF PRESENT HIGH-POWER FREE ELECTRON LASERS (FELS). THIS TECHNIQUE DOES NOT INVOLVE INTRA-CAVITY COMPONENTS THAT SUFFER LOSS DAMAGE DUE TO HIGH POWER OPERATION. A POTENTIAL BREAKTHROUGH IN FEL TECHNOLOGY, ANALYSIS AND SIMULATION ARE BEING PERF ...

    SBIR Phase II 1990 Department of DefenseMissile Defense Agency
  4. Comprehensible Descriptions for Fast Processing of Image Data

    SBC: DATAMAT SYSTEMS RESEARCH, INC.            Topic: N/A

    The proposed effort will apply advanced methods of hybrid learning to problems of detection and identification of sensory events (e.g., boost phase evens). Our approach aims at building a vision system capable of hybrid learning, in which symbolic (rule-based) and subsymbolic (neural network) strategies are integrated to achieve high efficiency and accuracy both in learning human comprehensible se ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  5. HIGH TEMPERATURE SUPERCONDUCTORS WITH IMPROVED CURRENT DENSITIES

    SBC: Cryopower Associates, Inc.            Topic: N/A

    THE APPLICATION OF HIGH TEMPERATURE SUPERCONDUCTORS IS SEVERELY LIMITED BY THE LOW CURRENT DENSITIES ACHIEVABLE IN BULK MATERIALS, SUCH AS Y1BA2CU3O(7-X), OR 123 FOR SHORT. THE LARGE CURRENT DENSITIES OBSERVED WITHIN INDIVIDUAL GRAINS (AND IN THIN FILMS) ARE REDUCED BY "WEAK LINKS" AT THE GRAIN BOUNDARIES, CAUSED BY MISALIGNMENT OF THE ANISOTROPIC GRAINS AND BY INSULATING IMPURITY PHASES. SOME OF ...

    SBIR Phase II 1990 Department of DefenseMissile Defense Agency
  6. MEGAVOLT MEGAHERTZ PULSE GENERATOR TECHNOLOGY

    SBC: Tetra Corporation            Topic: N/A

    A HIGH VOLTAGE PULSE GENERATOR TECHNOLOGY IS BEING DEVELOPEDFOR PRACTICAL BEAM ACCELERATORS, PULSED X-RAY SOURCES AND OTHER PULSE POWER APPLICATIONS. THE SPECIFIC TECHNOLOGYCAPABILITY IS SHORT PULSE WIDTH (10-250 NSEC), HIGH VOLTAGE PULSE (1 MV AND ABOVE) DELIVERED AT A HIGH REPETITION RATE (1 MHZ AND ABOVE). IN THIS PROGRAM THE TECHNOLOGY PERFORMANCE IS BEING INVESTIGATED AND A SMALL SCALE PROOF ...

    SBIR Phase II 1990 Department of DefenseMissile Defense Agency
  7. DEVELOPMLENT OF A LAUNDRY MONITOR FOR DETECTION OF HOT PARTICLE CONTAMINATION

    SBC: Shonka Research Associates            Topic: N/A

    TWO APPROACHES WILL BE EXAMINED TO SIGNIFICANTLY IMPROVE THESENSITIVITY OF LAUNDRY MONITORS TO DETECT AND SPECIFY LOCATION OF HOT PARTICLES ON LAUNDERED GARMENTS. THESE PROPOSED TECNIQUES HAVE HIGH POTENTIAL FOR DETECTING BOTH LOW ENERGY BETA AND ALPHA PARTICLE RADIATION AS WELL AS IMPROVING SENSITIVITY BY REDUCING BACKGROUND COUNT RATE.

    SBIR Phase II 1990 Nuclear Regulatory Commission
  8. TWO NEW NDE TECHNIQUES FOR INSPECTION OF CONTAINMENT WELDS BENEATH COATINGS

    SBC: PHYSICAL RESEARCH, INC.            Topic: N/A

    INSPECTION OF PAINTED OR COATED CARBON STEEL SURFACES OFTEN INVOLVES THE REMOVAL OF THE COATING PRIOR TO INSPECTION, ESPECIALLY WHEN THE USE OF MAGNETIC PARTICLE TESTING (MT) IS REQUIRED. IN THE CASE OF EXAMINATION OF CONTAINMENT VESSEL WALLS IN NUCLEAR POWER PLANTS, THE REMOVAL IS TIME CONSUMING, RESULTING IN INCREASED RADIATION EXPOSURE TO WORKERS. IN ADDITION, THE REMOVAL MUST BE DONE WITHOUT C ...

    SBIR Phase II 1990 Nuclear Regulatory Commission
  9. Development of a Compact Electron Beam Accelerator

    SBC: MICROWAVE TECHNOLGIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government