Award Data

"Mass Injection Pre-Compressor Cooling (MIPCC) is a promising technology which can permit convention jet engines, normally limited in speed and altitude, to propel aircraft to substantially higher altitudes and velocities. By injecting coolant ahead of thecompressor and using its heat of vaporization to cool inlet gasses, the engine can operate at substantially higher velocities without exceeding ...

The DOD has a need to leverage state of the art technologies remotely detect, collect, and evaluate physiological signals of interest. Applications and concepts-of-operations (CONOPs) that would benefit from this capability include, but are not limited to: building-clearing, warfighter health monitoring or battle damage assessment and triage, situational awareness and assessment. The main goal o ...

As an alternative to near-obsolete double-base or triple-base propellants, Digital Solid State Propulsion (DSSP) is developing Electric Solid Propellants (ESP) as a safe, green, higher performance highly manufacturable alternative for high velocity electro-thermal-chemical (ETC) gun rounds. These electric energetic materials are inherently safe, with ignition only possible via the sustained suppl ...

A new class of high-performance, low-SWaP computational devices is emerging based on increasingly diverse architectures. This diversity is improving performance, but comes at the cost of increased programming complexity. Each architecture requires variances in programming environment and model, typically distinguished by the type of parallelism supported by the hardware, limiting software portabil ...

Lyme disease is a vector-borne illness caused by infection with B. burgdorferi. Hard ticks (Ixodes spp.) acquire the spirochete from a natural reservoir of small mammals; transmission to humans occurs via the bite of an infected tick. By any measure, Lyme disease is one of the most serious emerging infectious diseases that threaten public health in the United States. New estimates from the CDC ind ...

The objective of this research is to enable pre-process milling parameter selection for"first part correct"production. In the proposed solution the Receptance Coupling Substructure Analysis (RCSA) approach will be used to couple the measured spindle-machine dynamics to models of the tool and holder and predict the assembly"s dynamic response. Given this information, frequency/time-domain algorithm ...

Graph analytics is a key component in identifying emerging trends and threats in many real-world applications. Large-scale graph analytics frameworks provide a convenient and highly scalable platform for developing algorithms to analyze large datasets. Although conceptually scalable, these techniques exhibit poor performance on modern computational hardware. Another model of graph computation has ...

In this SBIR effort we will design (Phase I) and demonstrate (Phase II) an integrated silicon electronic-photonic upconversion receiver that when used with our photonic backend will allow for a highly sensitive, real-time, and economical millimeter wave (mmW) imaging system. The development of this chip leverages recent progress in CMOS and SiGe HBT high speed analog circuit design and integrates ...

In this Phase II SBIR effort we will dramatically reduce the size, weight, and power requirements of a passive millimeter wave imaging system based on optical upconversion. To this end, we will integrate custom silicon-germanium low noise amplifiers that have been designed to efficiently couple with our high performance lithium niobate upconversion modules. In Phase I we analyzed the design requ ...

"Air Vehicles that are able to fly autonomously into confined spaces, land, shutdown, collect information, restart, and return to base, present an interesting propulsion challenge. Critical requirements of the propulsion system include:¿ Extremely high power per unit weight and per unit volume,¿ Extremely reliable, compact, and lightweight starting system¿ High fuel efficiency¿ Mult ...