Award Data

THE PROPOSED WORK INVOLVES APPLICATION OF SUPPORTED MOLTEN SALT CATALYSIS TO THE CATALYTIC ENDOTHERMIC DEHYDROGENATION OF METHANOL. THE CATALYSTS OF INTEREST INCLUDE EUTECTICS COMPOSED OF CU(+1) SALTS WITH HOMOGENEOUSLY DISPERSED ZN(+2) SALTS OR HETEROGENEOUSLY DISPERSED ZNO. IN ADDITION, THE STUDY WILL INCLUDE EVALUATION OF HETEROGENEOUS DISPERSIONS OF METALLIC PALLADIUM IN BINARY AND TERNARY EUT ...

Advanced Protection Products, Inc. (APPI) will use advanced materials and processes to develop and certify Very Light Body Armor (VLBA) plates that are capable of defeating a variety of ballistic threats. The VLBA plates will be designed using a titanium allow based metallic-composite armor system to provide cost-effective, lightweight protection. Composite facing and backing materials will be u ...

Fastening and joining technology has lagged behind the progress that has been made in other areas of composites for advanced air vehicles. Aerotech proposes the development of reversible polymeric adhesive bonding of composites using variable frequency microwave energy. With this method, composites are bonded using Poly Ether Ether Ketone (a high temperature thermoplastic) which is cured using v ...

GAS-TO-LIQUID HEAT EXCHANGERS FIND APPLICATION IN NEARLY EVERY ENERGY CONVERSION AND PROCESS SYSTEM. HOWEVER, DUE TO LOW HEAT FLUXES, THEY ARE EXCESSIVELY LARGE AND EXPENSIVE. LOW HEAT FLUXES ARE CAUSED PRIMARILY BY LOW GAS-SIDE HEAT TRANSFER COEFFICIENTS. THE OBJECTIVE OF THIS STUDY IS TO DEVELOP A NOVEL FLUIDIZED BED HEAT EXCHANGER WHICH HAS SIGNIFICANTLY GREATER HEAT FLUXES THAN CONVENTIONAL HE ...

N/A

ACETYLENE-TERMINATED RESINS REPRESENT ONE CLASS OF POLYMERS HAVING GREAT POTENTIAL UTILITY IN THE AEROSPACE INDUSTRY. THIS TYPE OF RESIN POSSESSES DESIRABLE PHYSICAL PROPERTIES SUCH AS TEMPERATURE, MOISTURE AND SHEAR RESISTANCE. A NECESSARY PRECURSOR FOR SYNTHESIS OF THESE RESINS IS PHENYLACETYLENE, WHICH IS DIFFICULT AND EXPENSIVE TO MANUFACTURE THROUGH CHEMICAL MEANS. THE PHASE I RESEARCH PROGRA ...

CompuTherm, LLC proposes to develop WinChem, an innovative and user-friendly computer program integrated with a thermodynamic database, to provide a significant new capability to rapidly determine chemical equilibrium necessary to evaluate the stability of high-temperature structural materials under corrosive (generally oxidative) conditions. The lack of this capability has been an obstacle to th ...

An automated dynamic firing zone generation imaging system is needed to increase the effectiveness and utility of shipboard weapon systems. The current manual firing zone definition process is manpower intensive, complex, and cannot account for motion or changing topside configuration. These limitations greatly restrict the lethality and utility of shipboard weapons. This project proposes a dyna ...

A significant problem for modern combat control system implementations is the incompatible development and deployment environments. These applications have specific performance requirements that until recently were only accurately obtained on the target installation system. However, for various logistic and economic reasons, the platforms utilized for advanced applications have typically been inc ...

N/A