You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Titanium-Composite Body Armor Plates

    SBC: Advanced Protection Products,            Topic: N/A

    Advanced Protection Products, Inc. (APPI) will use advanced materials and processes to develop and certify Very Light Body Armor (VLBA) plates that are capable of defeating a variety of ballistic threats. The VLBA plates will be designed using a titanium allow based metallic-composite armor system to provide cost-effective, lightweight protection. Composite facing and backing materials will be u ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
  2. DEVELOPMENT OF AN ADVANCED FAN BLADE CONTAINMENT SYSTEM

    SBC: Advanced Structures Technology            Topic: N/A

    AN ADVANCED TURBINE ENGINE FAN BLADE CONTAINMENT SYSTEM USING CERAMIC TILES ON A POLYMER FIBER BACKING RING IS PRO- POSED. THE PROPOSED CERAMIC/POLYMER-FIBER SYSTEM HAS PROVEN MORE WEIGHT EFFECTIVE THAN MONOLITHIC METALLIC OR POLYMER MATERIALS FOR STOPPING PENETRATION OF BALLISTIC MUNITIONS PROJECTILES. IT IS EXPECTED THAT THIS TECHNOLOGY, ORIGINAL-LY DEVELOPED FOR AIRCRAFT ARMOR SYSTEMS, WILL DEC ...

    SBIR Phase II 1989 Department of Transportation
  3. INFORMATION DISPLAY STRUCTURES

    SBC: Allotech Inc            Topic: N/A

    THIS PROPOSAL IS TO STUDY THE FEASIBILITY OF APPLYING THEORETICAL MODELS OF PERCEPTUAL PROCESSING IN HUMANS TO ESTABLISH BETTER COMMUNICATION OF INFORMATION TO HUMANS FROMTHEIR TECHNOLOGICAL ENVIRONMENT. THIS STUDY WILL DRAW ON THE LITERATURE OF PERCEPTUAL AND NEUROPHYSIOLOGICAL INFORMATION. IT WILL INCLUDE THEORETICAL WORK AND DEMONSTRATION DISPLAYS. THREE AREAS WILL BE CONSIDERED: 1) OPTIMIZING ...

    SBIR Phase I 1989 Department of Transportation
  4. DEVELOPMENT OF A HIGH HEAT FLUX HEAT EXCHANGER

    SBC: Applied Thermodynamic Systems            Topic: N/A

    GAS-TO-LIQUID HEAT EXCHANGERS FIND APPLICATION IN NEARLY EVERY ENERGY CONVERSION AND PROCESS SYSTEM. HOWEVER, DUE TO LOW HEAT FLUXES, THEY ARE EXCESSIVELY LARGE AND EXPENSIVE. LOW HEAT FLUXES ARE CAUSED PRIMARILY BY LOW GAS-SIDE HEAT TRANSFER COEFFICIENTS. THE OBJECTIVE OF THIS STUDY IS TO DEVELOP A NOVEL FLUIDIZED BED HEAT EXCHANGER WHICH HAS SIGNIFICANTLY GREATER HEAT FLUXES THAN CONVENTIONAL HE ...

    SBIR Phase I 1989 Department of DefenseNavy
  5. Highway Capacity Software in Portable Graphical User Interface (GUI) Format

    SBC: Catalina Engineering, Inc.            Topic: N/A

    The Highway Capacity Software (HCS) has, for the past 10 years, been the principal tool for applying the analysis methods of the Highway Capacity Manual (HCM). The HCS has been DOS-based with a very limited user interface. With a number of new research materials being produced, and an approved plan in place which leads to publication of an HCM 2000 and accompanying software, there is a strong op ...

    SBIR Phase II 1998 Department of Transportation
  6. Dynamic Firing Zone Imaging System

    SBC: Conceptual Systems & Software Inc            Topic: N/A

    An automated dynamic firing zone generation imaging system is needed to increase the effectiveness and utility of shipboard weapon systems. The current manual firing zone definition process is manpower intensive, complex, and cannot account for motion or changing topside configuration. These limitations greatly restrict the lethality and utility of shipboard weapons. This project proposes a dyna ...

    SBIR Phase I 1998 Department of DefenseNavy
  7. Unified HP/RT Development to Deployment Middleware Platform

    SBC: Conceptual Systems & Software Inc            Topic: N/A

    A significant problem for modern combat control system implementations is the incompatible development and deployment environments. These applications have specific performance requirements that until recently were only accurately obtained on the target installation system. However, for various logistic and economic reasons, the platforms utilized for advanced applications have typically been inc ...

    SBIR Phase I 1998 Department of DefenseNavy
  8. Self-Assembled Monolayer Based Methods for Fabrication of Diffractive Optical Elements

    SBC: DIGITAL OPTICS CORP.            Topic: N/A

    This SBIR Phase I project builds upon Digital Optics Corporation's experience in the design, fabrication and commercialization of diffractive and micro-optics and the experience of Dr. George Whitesides of Harvard University to provide an innovative approach to the fabrication of diffractive and micro-optical components using self-assembled monolayers (SAM's). The proposed approach makes use of SA ...

    SBIR Phase I 1998 Department of DefenseNavy
  9. Suprises and Opportunities

    SBC: EMERGENT TECHNOLOGIES CORP.            Topic: N/A

    Emergent Technologies Corp. (ETC) in conjunction with research partners at West Virginia University has developed and recently patented an innovation antenna that promises to revolutionize the science of antenna design, construction and utilization. The antenna, labeled the Countrawound Toroidal Helical Antenna (CTTHA), offers a number of significant advantages over conventional antennas. The CT ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
  10. TERFENOL-D Lamination Process Cost Reduction

    SBC: Etrema Products, Inc.            Topic: N/A

    All high performance TERFENOL-D sonar devices require the drivers to be laminated for eddy current control. The process of laminating TERFENOL-D to present interlamina resistivity requirements results in low yields due to considerable material loss and is, therefore, a wasteful process. The objective of this program is to define and experimentally verify accurate interlamina resistivity levels f ...

    SBIR Phase I 1998 Department of DefenseNavy
US Flag An Official Website of the United States Government