Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Titanium-Composite Body Armor Plates

    SBC: Advanced Protection Products,            Topic: N/A

    Advanced Protection Products, Inc. (APPI) will use advanced materials and processes to develop and certify Very Light Body Armor (VLBA) plates that are capable of defeating a variety of ballistic threats. The VLBA plates will be designed using a titanium allow based metallic-composite armor system to provide cost-effective, lightweight protection. Composite facing and backing materials will be u ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
  2. Gene-Probe Electrodes to Detect Enterically-Transmitted RNA Virus Pathogens

    SBC: ALDERON BIOSCIENCES, INC.            Topic: N/A

    Enterically transmitted pathogens cause far more illness than toxicants such as lead, mercury, pesticides, and all other forms of chemical contamination. The world has become increasingly vulnerable to the spread of old and flew infectious organisms and water-borne pathogens as illustrated by recent outbreaks of 20 well-known and at least 29 previously unknown diseases. New tests are needed to d ...

    SBIR Phase II 1998 Department of DefenseArmy
  3. DEVELOPMENT OF A HIGH HEAT FLUX HEAT EXCHANGER

    SBC: Applied Thermodynamic Systems            Topic: N/A

    GAS-TO-LIQUID HEAT EXCHANGERS FIND APPLICATION IN NEARLY EVERY ENERGY CONVERSION AND PROCESS SYSTEM. HOWEVER, DUE TO LOW HEAT FLUXES, THEY ARE EXCESSIVELY LARGE AND EXPENSIVE. LOW HEAT FLUXES ARE CAUSED PRIMARILY BY LOW GAS-SIDE HEAT TRANSFER COEFFICIENTS. THE OBJECTIVE OF THIS STUDY IS TO DEVELOP A NOVEL FLUIDIZED BED HEAT EXCHANGER WHICH HAS SIGNIFICANTLY GREATER HEAT FLUXES THAN CONVENTIONAL HE ...

    SBIR Phase I 1989 Department of DefenseNavy
  4. Dynamic Firing Zone Imaging System

    SBC: Conceptual Systems & Software Inc            Topic: N/A

    An automated dynamic firing zone generation imaging system is needed to increase the effectiveness and utility of shipboard weapon systems. The current manual firing zone definition process is manpower intensive, complex, and cannot account for motion or changing topside configuration. These limitations greatly restrict the lethality and utility of shipboard weapons. This project proposes a dyna ...

    SBIR Phase I 1998 Department of DefenseNavy
  5. Unified HP/RT Development to Deployment Middleware Platform

    SBC: Conceptual Systems & Software Inc            Topic: N/A

    A significant problem for modern combat control system implementations is the incompatible development and deployment environments. These applications have specific performance requirements that until recently were only accurately obtained on the target installation system. However, for various logistic and economic reasons, the platforms utilized for advanced applications have typically been inc ...

    SBIR Phase I 1998 Department of DefenseNavy
  6. Evaluaation of alternative High-Temperature high-Field Dielectrics for SiC Devices

    SBC: CREE RESEARCH, INC.            Topic: N/A

    Silicon Carbide is exceptionally well suited for high temperature, high-power electronics. These electronics would be ideal for high-temperature applications for electric combat vehicles, including vehicle propulsion, active protection, electric gun and turret control. Therefore, silicon carbide has been identified as a critical electronic technology for use in future armored vehicles. To fully ...

    SBIR Phase I 1998 Department of DefenseArmy
  7. Self-Assembled Monolayer Based Methods for Fabrication of Diffractive Optical Elements

    SBC: DIGITAL OPTICS CORP.            Topic: N/A

    This SBIR Phase I project builds upon Digital Optics Corporation's experience in the design, fabrication and commercialization of diffractive and micro-optics and the experience of Dr. George Whitesides of Harvard University to provide an innovative approach to the fabrication of diffractive and micro-optical components using self-assembled monolayers (SAM's). The proposed approach makes use of SA ...

    SBIR Phase I 1998 Department of DefenseNavy
  8. Deformable Training Edges and Smart Material Actuation for Active Control of Rotor Blades.

    SBC: DOMZALSKI MACHINE            Topic: N/A

    This project will determine the feasibility of smart material actuation of deformable trailing edges for active control of helicopter rotor blades. Several concepts will be developed and analyzed. Innovative structural designs and use of materials will be considered. The proposed designs will be analyzed to predict their performance levels, fatigue strength, and impact on blade weight and balan ...

    SBIR Phase I 1998 Department of DefenseArmy
  9. Suprises and Opportunities

    SBC: EMERGENT TECHNOLOGIES CORP.            Topic: N/A

    Emergent Technologies Corp. (ETC) in conjunction with research partners at West Virginia University has developed and recently patented an innovation antenna that promises to revolutionize the science of antenna design, construction and utilization. The antenna, labeled the Countrawound Toroidal Helical Antenna (CTTHA), offers a number of significant advantages over conventional antennas. The CT ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
  10. TERFENOL-D Lamination Process Cost Reduction

    SBC: Etrema Products, Inc.            Topic: N/A

    All high performance TERFENOL-D sonar devices require the drivers to be laminated for eddy current control. The process of laminating TERFENOL-D to present interlamina resistivity requirements results in low yields due to considerable material loss and is, therefore, a wasteful process. The objective of this program is to define and experimentally verify accurate interlamina resistivity levels f ...

    SBIR Phase I 1998 Department of DefenseNavy
US Flag An Official Website of the United States Government