You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Titanium-Composite Body Armor Plates
SBC: Advanced Protection Products, Topic: N/AAdvanced Protection Products, Inc. (APPI) will use advanced materials and processes to develop and certify Very Light Body Armor (VLBA) plates that are capable of defeating a variety of ballistic threats. The VLBA plates will be designed using a titanium allow based metallic-composite armor system to provide cost-effective, lightweight protection. Composite facing and backing materials will be u ...
SBIR Phase I 1998 Department of DefenseSpecial Operations Command -
DEVELOPMENT OF A HIGH HEAT FLUX HEAT EXCHANGER
SBC: Applied Thermodynamic Systems Topic: N/AGAS-TO-LIQUID HEAT EXCHANGERS FIND APPLICATION IN NEARLY EVERY ENERGY CONVERSION AND PROCESS SYSTEM. HOWEVER, DUE TO LOW HEAT FLUXES, THEY ARE EXCESSIVELY LARGE AND EXPENSIVE. LOW HEAT FLUXES ARE CAUSED PRIMARILY BY LOW GAS-SIDE HEAT TRANSFER COEFFICIENTS. THE OBJECTIVE OF THIS STUDY IS TO DEVELOP A NOVEL FLUIDIZED BED HEAT EXCHANGER WHICH HAS SIGNIFICANTLY GREATER HEAT FLUXES THAN CONVENTIONAL HE ...
SBIR Phase I 1989 Department of DefenseNavy -
Variable Cell Blanket Sandwich Panel Technology
SBC: Benecor, Inc. Topic: N/AN/A
SBIR Phase I 1998 National Aeronautics and Space Administration -
3-AXIS ALL-ROTARY-MOTION NUMERICALLY-CONTROLLED OPTICAL GENERATOR
SBC: Breault Research Organization, Inc. Topic: N/ATHE DEVELOPMENT OF A LOW COST, 3-AXIS, NUMERICALLY-CONTROLLED, OPTICAL GENERATOR SUITABLE FOR USE IN GRINDING GLASS OR CERAMIC PARTS, AS WELL AS FOR MACHING METALS TO OPTICAL TOLERANCES IS DESCRIBED. THIS INNOVATIVE DESIGN USES ROTARY BEARINGS ON ALL THREE AXES BECAUSE OF THEHIGH ACCURACY AND LOW COST PROVIDED. THE NC MACHINE WILL HAVE THE CAPACITY TO GENERATE EITHER ROTATIONALLY SYMMETRIC OR ASYM ...
SBIR Phase I 1989 National Aeronautics and Space Administration -
Dynamic Firing Zone Imaging System
SBC: Conceptual Systems & Software Inc Topic: N/AAn automated dynamic firing zone generation imaging system is needed to increase the effectiveness and utility of shipboard weapon systems. The current manual firing zone definition process is manpower intensive, complex, and cannot account for motion or changing topside configuration. These limitations greatly restrict the lethality and utility of shipboard weapons. This project proposes a dyna ...
SBIR Phase I 1998 Department of DefenseNavy -
Unified HP/RT Development to Deployment Middleware Platform
SBC: Conceptual Systems & Software Inc Topic: N/AA significant problem for modern combat control system implementations is the incompatible development and deployment environments. These applications have specific performance requirements that until recently were only accurately obtained on the target installation system. However, for various logistic and economic reasons, the platforms utilized for advanced applications have typically been inc ...
SBIR Phase I 1998 Department of DefenseNavy -
THERMAL CONTROL COATINGS FOR COMPOSITE STRUCTURES
SBC: Dset Labs Inc Topic: N/ATHE PROPOSED PROGRAM ADDRESSES THE DEVELOPMENT OF A THERMAL CONTROL COATING TO MAINTAIN ADVANCED COMPOSITE MATERIALS WITHIN A SPECIFIED TEMPERATURE RANGE. THE PRINCIPAL EFFORT WILL BE DEVOTED TO FORMULATING A MANUFACTURABLE, ATOMIC OXYGEN-RESISTANT SPACECRAFT COATING HAVING BOTH THE REQUISITE ALPHA S/EPSILON RATIO (=0.8) AND SPACE ULTRAVIOLETSTABILITY. EMPHASIS WILL BE GIVEN TO TAILORING ALPHA S/E ...
SBIR Phase I 1989 National Aeronautics and Space Administration -
TERFENOL-D Lamination Process Cost Reduction
SBC: Etrema Products, Inc. Topic: N/AAll high performance TERFENOL-D sonar devices require the drivers to be laminated for eddy current control. The process of laminating TERFENOL-D to present interlamina resistivity requirements results in low yields due to considerable material loss and is, therefore, a wasteful process. The objective of this program is to define and experimentally verify accurate interlamina resistivity levels f ...
SBIR Phase I 1998 Department of DefenseNavy -
Virtual Vertical Aircraft Signal Trainer
SBC: FATS, INC. Topic: N/AAeroMed Software, L.L.C., proposes to develop an interactive virtual environment simulator for vertical aircraft signal training. The proposed system is intended to provide Landing Signal Enlisted (LSE) trainees with a dynamic training device similar to the operational flight trainers used by aviators. Recent advances in data acquisition, signal processing and graphics software, computer process ...
SBIR Phase II 1998 Department of DefenseNavy -
Fatigue evaluation and countermeasures using real-time video analysis
SBC: Future of Technology and Health, LC Topic: N/AN/A
SBIR Phase I 1998 National Aeronautics and Space Administration