You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Small Diesel Engines, JP5 / JP8 Fueled

    SBC: Sensintel Inc.            Topic: N/A

    "The goal of this proposed Navy SBIR project is to optimize, analyze, design, build and test a high efficiency 2 cycle ceramic engine that will run on JP-5 fuel and weigh less than 10 ounces while burning less than 1.0 lbs of fuel per hour. The engine willincorporate a ceramic piston, cylinder, and head to permit high temperature operation without cooling to effectively burn this heavy fuel. In ...

    SBIR Phase I 2002 Department of DefenseNavy
  2. Small Diesel Engines, JP5 / JP8 Fueled

    SBC: Sensintel Inc.            Topic: N/A

    "The goal of this proposed Navy SBIR project is to optimize, analyze, design, build and test a novel 0.5 horsepower engine that will run on JP-5 fuel and weigh less than 10 ounces while burning less than 0.5 lbs of fuel per hour. The proposed engine is afour-stroke cycle Rand Cam Diesel engine utilizing continuous injection and combustion in a single combustion chamber. The engine will be of ...

    SBIR Phase I 2002 Department of DefenseNavy
  3. III-Nitride Integrated Micro-Cavity Photonic Devices

    SBC: III-N Technology, Inc            Topic: N/A

    "The research proposed here is built on the promising results obtained in the Phase I project. During Phase I research, we have further improved blue micro-size light emitter output power efficiencies by optimizing the material qualities as well as devicestructures. Several integrated photonics devices have been fabricated and their operation under current injection has been achieved.The objecti ...

    SBIR Phase II 2002 Department of DefenseNavy
  4. Titanium-Composite Body Armor Plates

    SBC: Advanced Protection Products,            Topic: N/A

    Advanced Protection Products, Inc. (APPI) will use advanced materials and processes to develop and certify Very Light Body Armor (VLBA) plates that are capable of defeating a variety of ballistic threats. The VLBA plates will be designed using a titanium allow based metallic-composite armor system to provide cost-effective, lightweight protection. Composite facing and backing materials will be u ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
  5. Fiber Optic Interconnect Technology

    SBC: AMBALUX CORP.            Topic: N/A

    "The proposed fiber-optic terminus provides high-bandwidth connectivity to an optical transceiver on an underwater vehicle or other platform. Unique technology is used to provide full azimuthal coverage with no moving parts for acquisition, tracking,transmission and reception. The receiver, in particular, combines very high sensitivity with high bandwidth to support data rates in excess of 10 Mb ...

    SBIR Phase I 2002 Department of DefenseNavy
  6. DEVELOPMENT OF A HIGH HEAT FLUX HEAT EXCHANGER

    SBC: Applied Thermodynamic Systems            Topic: N/A

    GAS-TO-LIQUID HEAT EXCHANGERS FIND APPLICATION IN NEARLY EVERY ENERGY CONVERSION AND PROCESS SYSTEM. HOWEVER, DUE TO LOW HEAT FLUXES, THEY ARE EXCESSIVELY LARGE AND EXPENSIVE. LOW HEAT FLUXES ARE CAUSED PRIMARILY BY LOW GAS-SIDE HEAT TRANSFER COEFFICIENTS. THE OBJECTIVE OF THIS STUDY IS TO DEVELOP A NOVEL FLUIDIZED BED HEAT EXCHANGER WHICH HAS SIGNIFICANTLY GREATER HEAT FLUXES THAN CONVENTIONAL HE ...

    SBIR Phase I 1989 Department of DefenseNavy
  7. Dynamic Firing Zone Imaging System

    SBC: Conceptual Systems & Software Inc            Topic: N/A

    An automated dynamic firing zone generation imaging system is needed to increase the effectiveness and utility of shipboard weapon systems. The current manual firing zone definition process is manpower intensive, complex, and cannot account for motion or changing topside configuration. These limitations greatly restrict the lethality and utility of shipboard weapons. This project proposes a dyna ...

    SBIR Phase I 1998 Department of DefenseNavy
  8. Unified HP/RT Development to Deployment Middleware Platform

    SBC: Conceptual Systems & Software Inc            Topic: N/A

    A significant problem for modern combat control system implementations is the incompatible development and deployment environments. These applications have specific performance requirements that until recently were only accurately obtained on the target installation system. However, for various logistic and economic reasons, the platforms utilized for advanced applications have typically been inc ...

    SBIR Phase I 1998 Department of DefenseNavy
  9. TERFENOL-D Lamination Process Cost Reduction

    SBC: Etrema Products, Inc.            Topic: N/A

    All high performance TERFENOL-D sonar devices require the drivers to be laminated for eddy current control. The process of laminating TERFENOL-D to present interlamina resistivity requirements results in low yields due to considerable material loss and is, therefore, a wasteful process. The objective of this program is to define and experimentally verify accurate interlamina resistivity levels f ...

    SBIR Phase I 1998 Department of DefenseNavy
  10. Enhanced Crystalline Alignment of TERFENOL-D

    SBC: Etrema Products, Inc.            Topic: N/A

    "Giant magnetostrictive materials, specifically the alloys of TERFENOL-D possess a high energy density that enables compact, high power, broad-band sources and similar, high authority actuators for use in several different military and commercialapplications. Current manufacturing techniques, namely the ETREMA Crystal Growth (ECG) process, yield polycrystalline materials with a preferential cryst ...

    SBIR Phase II 2002 Department of DefenseNavy
US Flag An Official Website of the United States Government