Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. 355 nm Laser Design for Atmospheric Measurements

    SBC: Cutting Edge Optronics, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  2. Tri-Spectroscopy Interferometric Micro-imaging Sensor

    SBC: MEDECO, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  3. Aluminum-Nitride Infrared Window Materials for High Heat Load Applications

    SBC: AP Materials            Topic: N/A

    Feasibility of fabricating IR window materials from aluminum nitride (AlN) will be demonstrated. Aluminum nitride windows are sought as replacements for sapphire windows on high speed seeker missiles because of their higher thermal shock resistance. Our approach is to consolidate high-purity ultrafine powders of AlN to obtain a nanocrystalline window. Small grain size is expected to minimi ...

    SBIR Phase I 1998 Department of DefenseNavy
  4. Bottom Anti-Reflective Coatings (BARCs) for 193 nm Lithography

    SBC: Brewer Science Incorporated            Topic: N/A

    A long-standing trend in the integrated circuit industry is to reduce pattern geometries on semiconductor substrates. To continue this trend, the next exposure wavelength after on-going deep-ultraviolet (248 nm) will be 193 nm. This SBIR Phase I program will identify and develop thermosetting bottom anti-reflective coatings (BARCs) meeting requirements for use with 193 nm unilayer resists. A serie ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  5. Development of Uncooled Microbolometer Arrays for IR Imaging

    SBC: Brewer Science Incorporated            Topic: N/A

    Ion-implanted, thin polymer films exhibit a large temperature coefficient of resistance which suggests their application in microbolometer arrays used for infrared ( IR) imaging and temperature mapping. Compared to current microbolometer designs which require a series of difficult deposition steps, an ion-implanted polymer-based device requires only a single layer which can be applied by spin coat ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  6. Chemical Chara and Monitoring System (PMCMS)

    SBC: Deposition Research Lab            Topic: N/A

    This proposal describes Phase I of a research and development program to develop and commercialize a compact, affordable Particulate Matter on-line, Real-time, Physical and Chemical Characterization and Monitoring System (PMCMS), that will quickly and accurately analyze the chemical constituents and size distribution of particulate emissions from Air Force Operations. The PMCMS will provide size ...

    SBIR Phase I 1998 Department of DefenseAir Force
  7. Development of a Low Cost Process to Provide Improved Carbon Fiber-Vinyl Ester Adhesion

    SBC: DUKE & ASSOC.            Topic: N/A

    Duke & Associates will develop a process/material modification for carbon fiber/vinyl ester composite materials which will provide enhanced fiber-matrix adhesion using a low cost, room temperature process such as resin transfer molding (RTM) or vacuum assisted RTM to manufacture high performance composite structures. The program goal is to increase the fiber to matrix strength to that of carbon e ...

    SBIR Phase I 1998 Department of DefenseNavy
  8. Integrated Substrate and Thin-film Design Methods

    SBC: IMAGINATION ENGINES, INC.            Topic: N/A

    A recently patented connectionist paradigm, called the hine hose of thin film growth and removal. Trained by exposure to cumulative experimental data, this paradigm may autonomously compute processing routes toward specifically targeted end goals. In the case of thin film growth and removal, the Creativity Machine ma ...

    SBIR Phase I 1998 Department of DefenseAir Force
  9. Mems-Based, Reconfigurable, Fault-Tolerant Optical Backplan

    SBC: Minmax Technologies            Topic: N/A

    Backplanes are key building blocks around which larger electronic systems are often implemented. They are designed so that the insertion of application derived function boards can use backplane paths for board-to-board communication. As systems grow, requiring more, higher-bandwidth paths, electronic backplanes are becoming inadequate and, for example, pin limitations have become a severe design c ...

    STTR Phase I 1998 Department of DefenseMissile Defense Agency
  10. Lightweight Portable Blast-Resistnat Barriers

    SBC: PRODUCTION PRODUCTS MANUFACTURING & SALES CO., INC.            Topic: N/A

    Production Products will develop a lightweight, modular, easily deployable barrier system that will be based on out proven polyurethane composite technology that has demonstrated the ability to absorb very high levels of elongation and energy without failure. This material can be elongated 500% repeatedly and still returns to it's original shape. We will design a barrier system around this struc ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government