Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. 3-AXIS ALL-ROTARY-MOTION NUMERICALLY-CONTROLLED OPTICAL GENERATOR

    SBC: Breault Research Organization, Inc.            Topic: N/A

    THE DEVELOPMENT OF A LOW COST, 3-AXIS, NUMERICALLY-CONTROLLED, OPTICAL GENERATOR SUITABLE FOR USE IN GRINDING GLASS OR CERAMIC PARTS, AS WELL AS FOR MACHING METALS TO OPTICAL TOLERANCES IS DESCRIBED. THIS INNOVATIVE DESIGN USES ROTARY BEARINGS ON ALL THREE AXES BECAUSE OF THEHIGH ACCURACY AND LOW COST PROVIDED. THE NC MACHINE WILL HAVE THE CAPACITY TO GENERATE EITHER ROTATIONALLY SYMMETRIC OR ASYM ...

    SBIR Phase I 1989 National Aeronautics and Space Administration
  2. A Bread Based Environment for Test (ABBET) Architecture Prototype

    SBC: QUINCY STREET CORP.            Topic: N/A

    The overall abjective of this proposed project is the development of detailed definitions for the interfaces defined by the ABBET architecture. Signal models wil developed based upon the C/ATLAS set of signal nouns. A Test Foundation Framework (TFF) will be implemented to demonstrate the ability of test program or test program component transfer across multiple test platforms. This phase also w ...

    SBIR Phase I 1998 Department of DefenseAir Force
  3. A Novel Processing Technique for the Large-Scale Production of Red Phosphorus

    SBC: ATS-MER, LLC            Topic: N/A

    Current techniques for the production of red phosphorus powders cannot produce 5¿m size powders while maintaining a pure surface. Two new processing techniques are suggested that are capable of processing red phosphorus into powders 5¿m or smaller in size. These techniques have been demonstrated with conventional metals and alloys but not with phosphorus. One important advantage of these proc ...

    SBIR Phase I 1998 Department of DefenseNavy
  4. A PLASMA ASSIST CVD PROCESS FOR PRODUCING TIB(2) AND OTHER CERAMIC MULTIFILAMENT TOWS

    SBC: ATS-MER, LLC            Topic: N/A

    THERE IS A VERY LARGE PENT-UP DEMAND FOR ADVANCED HIGH PERFORMANCE HIGH TEMPERATURE INTERMETALLIC COMPOSITES WHICH IS LIMITED BY THE AVAILABILITY OF AN ECONOMICAL SMALL DIAMETER CERAMIC FIBER WITH GOOD STRENGTH RETENTION > OR - 1400 DEG C. COMMERCIALLY AVAILABLE CERAMIC FIBERS PRODUCED AS MONOFILAMENT BY CVD OR PYROLYSIS OF POLYMER PRECURSOR HAVE ONE OR MORE FAULTS OF POOR STRENGTH RETENTION ABOVE ...

    SBIR Phase I 1989 Department of DefenseDefense Advanced Research Projects Agency
  5. A Variable Stiffness Spar (VSS) Approach for Aircraft Maneuver Enhancement

    SBC: Zona Technology, Inc            Topic: N/A

    An innovative variable stiffness spar (VSS) approach is proposed for the enhancement of aircraft roll performance. F/A-18 pre-roll-modification aircraft (F/A-18 PRM) is selected as the baseline aircraft for its low torsional wing stiffness and available baseline data. The F/A-18 PRM, when integrated with VSS (F-18/VSS), requires only the outboard trailing-edge aileron for roll maneuver. The pre ...

    SBIR Phase I 1998 Department of DefenseAir Force
  6. AFFORDABLE OXIDATION INHIBITED CARBON-CARBON COMPOSITES FOR 1200 DEGREE F APPLICATION

    SBC: ATS-MER, LLC            Topic: N/A

    Affordable/low cost carbon-carbon (C-C) composites are enabling to a number of defense, aerospace and commercial applications. However, in addition to cost, their limitation is carbon gasification in oxidative environments above about 750¿F (=400¿C). An inhibited carbon matrix that reduces oxidation rate by a factor of 200 with up to double the strength of uninhibited composites which could be ...

    SBIR Phase I 1998 Department of DefenseAir Force
  7. Alternative Substrates for Materials Integration

    SBC: EPITRONICS CORP.            Topic: N/A

    The recent demonstration of twist bonded GaAs substrates offers the potential to develop universally compliant substrates upon which almost any III-V or related semiconductor can be grown without lattice mismatch induced defect formation. Compliant substrates would rapidly expand and improve a number of device applications, such as Sb-based detectors and a wide range of InGaAlAsP devices, which ar ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  8. Automatic Test System (ATS) Analysis and Configuration Management Tool

    SBC: QUINCY STREET CORP.            Topic: N/A

    The overall objective of this project is to develop an easy to use, reliable toolset to match test requirements to test equipment. The matching criteria will be developed by utilizing ABBET test foundation framework concepts. The requirements and capabilities for the test process and equipment wlll be defined in terms of signals. In the case of test equipment, additional information concerning ...

    SBIR Phase I 1998 Department of DefenseNavy
  9. Band-gap Engineered Visible Radiation Sensors

    SBC: Nanomaterials Research LLC            Topic: N/A

    Visible radiation detectors are enabling technology and are the basis for many military and commercial applications either in use or as proposed. Conventional sensors based on properties of Il-VI compounds are unfortunately temperature sensitive, time varying, and slow. This program seeks to overcome these limitations by developing visible radiation sensors from proprietary nanostructured material ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  10. Bandwidth- and Power-Efficient, High Rate Burst Modem

    SBC: SiCOM, Inc            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government