List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. 1.26 Single Frequency Fiber Laser

    SBC: NP Photonics, Inc.            Topic: S101

    This proposal is for the development of an innovative compact, high power, and extremely reliable 1.26 micron Ho-doped single frequency fiber laser. The proposed single frequency seeder fiber laser consists of Raman pump laser and single frequency 1.26-micron fiber laser, which will be constructed by using Ho3+-doped fluoride glass fiber. A Raman fiber laser is used as a resonant pump laser source ...

    SBIR Phase II 2010 National Aeronautics and Space Administration
  2. 3-AXIS ALL-ROTARY-MOTION NUMERICALLY-CONTROLLED OPTICAL GENERATOR

    SBC: Breault Research Organization, Inc.            Topic: N/A

    THE DEVELOPMENT OF A LOW COST, 3-AXIS, NUMERICALLY-CONTROLLED, OPTICAL GENERATOR SUITABLE FOR USE IN GRINDING GLASS OR CERAMIC PARTS, AS WELL AS FOR MACHING METALS TO OPTICAL TOLERANCES IS DESCRIBED. THIS INNOVATIVE DESIGN USES ROTARY BEARINGS ON ALL THREE AXES BECAUSE OF THEHIGH ACCURACY AND LOW COST PROVIDED. THE NC MACHINE WILL HAVE THE CAPACITY TO GENERATE EITHER ROTATIONALLY SYMMETRIC OR ASYM ...

    SBIR Phase I 1989 National Aeronautics and Space Administration
  3. A Bread Based Environment for Test (ABBET) Architecture Prototype

    SBC: QUINCY STREET CORP.            Topic: N/A

    The overall abjective of this proposed project is the development of detailed definitions for the interfaces defined by the ABBET architecture. Signal models wil developed based upon the C/ATLAS set of signal nouns. A Test Foundation Framework (TFF) will be implemented to demonstrate the ability of test program or test program component transfer across multiple test platforms. This phase also w ...

    SBIR Phase I 1998 Department of DefenseAir Force
  4. A DECENTRALIZED, FOCUS LEARNING INSERVICE MODEL WITH COMPUTERIZED ASSESSMENT AND RECORD KEEPING

    SBC: A.U. Software, Incorporated            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of Education
  5. A Light Weight Titanium Alloy Machine Gun Barrel with a Ceramic Liner

    SBC: ATS-MER, LLC            Topic: N091004

    Current rapid fire guns used by the Marines overheat during sustained rapid firing. As a result they are subject to failure in combat situations placing the war fighter at risk. The use of a gun barrel with greater refractory capability than the current steel barrels would present a true solution to this problem. A ceramic lined gun barrel would have excellent resistance to failure from excessive ...

    SBIR Phase I 2010 Department of DefenseNavy
  6. A Low Cost Continuous Process to Produce Magnet Alloys

    SBC: ATS-MER, LLC            Topic: 06b

    The current processes to produce Nd-Fe-B alloy powders for producing high magnetic strength permanent magnets for application in electric traction motors for use in electric vehicles requires a significant number of steps resulting in high cost. To meet the cost goals for these motors to expand the availability of electric vehicles, substantial reductions in cost to produce the Nd-Fe-B alloy powd ...

    SBIR Phase I 2010 Department of Energy
  7. A Low Cost In-Situ Bimetallic Reduction Prototype System for the Treatment and Remediation of Chlorinated Solvent-Contaminated Waters

    SBC: ATS-MER, LLC            Topic: N/A

    N/A

    SBIR Phase I 1998 Environmental Protection Agency
  8. A NATURAL GAS LIQUEFIER FOR VEHICLE FUEL

    SBC: General Pneumatics Corp            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of Energy
  9. A NEW DIAGNOSTIC TEST FOR SWINE DYSENTERY

    SBC: Arizona Biotechnology Corp.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of Agriculture
  10. A Novel Processing Technique for the Large-Scale Production of Red Phosphorus

    SBC: ATS-MER, LLC            Topic: N/A

    Current techniques for the production of red phosphorus powders cannot produce 5¿m size powders while maintaining a pure surface. Two new processing techniques are suggested that are capable of processing red phosphorus into powders 5¿m or smaller in size. These techniques have been demonstrated with conventional metals and alloys but not with phosphorus. One important advantage of these proc ...

    SBIR Phase I 1998 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government