List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. 1.57 Micron High Pulse Energy Single Frequency Fiber Laser

    SBC: AdValue Photonics Inc            Topic: S101

    We propose to demonstrate and build a 1.572 micron single frequency high pulse energy and high peak power fiber laser by using an innovative Er-doped gain fiber with large core diameter and high gain per unit length. 1.572 micron single frequency high energy and high peak power fiber laser is needed for accurately measuring column CO2 concentrations . In Phase I, we will design and fabricate the l ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  2. 24/7 Monitoring of Active Satellites using Passive Radio-Frequency (RF) Sensors

    SBC: RINCON RESEARCH CORPORATION            Topic: AF171026

    Rincon Research Corporation (RRC) has developed a low-cost passive Radio Frequency (RF)- based system that generates high-accuracy tracking observations using the RF signals broadcast by active satellites. RRC has demonstrated that this system can track a

    SBIR Phase I 2017 Department of DefenseAir Force
  3. 3-AXIS ALL-ROTARY-MOTION NUMERICALLY-CONTROLLED OPTICAL GENERATOR

    SBC: Breault Research Organization, Inc.            Topic: N/A

    THE DEVELOPMENT OF A LOW COST, 3-AXIS, NUMERICALLY-CONTROLLED, OPTICAL GENERATOR SUITABLE FOR USE IN GRINDING GLASS OR CERAMIC PARTS, AS WELL AS FOR MACHING METALS TO OPTICAL TOLERANCES IS DESCRIBED. THIS INNOVATIVE DESIGN USES ROTARY BEARINGS ON ALL THREE AXES BECAUSE OF THEHIGH ACCURACY AND LOW COST PROVIDED. THE NC MACHINE WILL HAVE THE CAPACITY TO GENERATE EITHER ROTATIONALLY SYMMETRIC OR ASYM ...

    SBIR Phase I 1989 National Aeronautics and Space Administration
  4. A Bread Based Environment for Test (ABBET) Architecture Prototype

    SBC: QUINCY STREET CORP.            Topic: N/A

    The overall abjective of this proposed project is the development of detailed definitions for the interfaces defined by the ABBET architecture. Signal models wil developed based upon the C/ATLAS set of signal nouns. A Test Foundation Framework (TFF) will be implemented to demonstrate the ability of test program or test program component transfer across multiple test platforms. This phase also w ...

    SBIR Phase I 1998 Department of DefenseAir Force
  5. A DECENTRALIZED, FOCUS LEARNING INSERVICE MODEL WITH COMPUTERIZED ASSESSMENT AND RECORD KEEPING

    SBC: A.U. Software, Incorporated            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of Education
  6. A Fully Automated Mesh Generation Tool

    SBC: D&P LLC            Topic: A105

    This SBIR Phase I project proposes to develop a fully automated mesh generation tool which contains two parts: surface mesh generation from the imported Computer Aided Design (CAD) models and volume mesh generation from the generated surface mesh. It is well known that CAD geometry models constructed for manufacturing purposes are generally not directly useable by Computational Fluid Dynamics (CFD ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  7. A Low Cost In-Situ Bimetallic Reduction Prototype System for the Treatment and Remediation of Chlorinated Solvent-Contaminated Waters

    SBC: ATS-MER, LLC            Topic: N/A

    N/A

    SBIR Phase I 1998 Environmental Protection Agency
  8. A NATURAL GAS LIQUEFIER FOR VEHICLE FUEL

    SBC: General Pneumatics Corp            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of Energy
  9. A NEW DIAGNOSTIC TEST FOR SWINE DYSENTERY

    SBC: Arizona Biotechnology Corp.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of Agriculture
  10. A Novel Processing Technique for the Large-Scale Production of Red Phosphorus

    SBC: ATS-MER, LLC            Topic: N/A

    Current techniques for the production of red phosphorus powders cannot produce 5¿m size powders while maintaining a pure surface. Two new processing techniques are suggested that are capable of processing red phosphorus into powders 5¿m or smaller in size. These techniques have been demonstrated with conventional metals and alloys but not with phosphorus. One important advantage of these proc ...

    SBIR Phase I 1998 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government