You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Monitoring of Arcing Condition in GMAW and Its Variants

    SBC: ADAPTIVE INTELLIGENT SYSTEMS            Topic: N08178

    This SBIR Phase I project is to prove the feasibility of an innovative weld monitoring technology. This innovative technology is characterized by (1) an innovative non-transferred arc sensor which responds to both surface conductivity and sensor-to-joint distance and can be used to monitor the joint geometry and possible surface contamination such as paint, oil, sand, etc. and (2) an innovative me ...

    SBIR Phase I 2008 Department of DefenseNavy
  2. A Modified GMAW System for Distortion Reduction and Travel Speed Increase through Separate Heat Input and Deposition Rate Control

    SBC: ADAPTIVE INTELLIGENT SYSTEMS            Topic: N07211

    Gas Metal Arc Welding (GMAW) is the most widely used welding process. It is also the major process used in shipbuilding. In traditional GMAW and all its modifications, the current which melts the wire is the same as the current which heats the base metal. The base metal heat input is thus proportional to the heat which melts the wire. To maintain a minimally acceptable productivity as measured by ...

    SBIR Phase I 2008 Department of DefenseNavy
  3. Sensor Torch Based Adaptive Intelligent Control for Circumferential Welding of Pipes

    SBC: ADAPTIVE INTELLIGENT SYSTEMS            Topic: N05154

    Orbital pipe welding systems are not true emulation of skilled welders who adjust welding parameters based on observation on the weld pool. This SBIR Phase II project aims at the development of commercial prototype systems which can adaptively adjust welding parameters based on an observation on the weld pool surface like a skilled welder but does not require the torch to be moved smoothly/evenly. ...

    SBIR Phase II 2008 Department of DefenseNavy
  4. Physics-Based Rapid Aeroelastic Model Updating In Support Of Aircraft Flight Testing

    SBC: Advanced Dynamics, Inc.            Topic: AF073142

    The objective of the proposed research aims to develop Reduced Order Models (ROMs) (i.e. POD, HB, combined POD and HB) based upon flight data to better predict the aircraft aeroelastic response at next flight condition, e.g. higher Mach number. By incorporating flight test data and using the highest fidelity computational models in reduced order form we will obtain computational solutions that a ...

    SBIR Phase I 2008 Department of DefenseAir Force
  5. Gradient Transport Correction (GTC): A General Confinement Method for Better Simulation of Rotor Wake and Vortex-Dominated Flows

    SBC: Advanced Dynamics, Inc.            Topic: A210

    CFD modeling and simulation has been heavily invested in decades of manpower by a large community of researchers. However, the excessive numerical diffusion inherently caused by discretization errors plus the possibly largest/finest grid requirement for rotor wake modeling prevents CFD to be routinely used in practical engineering calculations. The proposed Gradient Transport Correction (GTC) meth ...

    SBIR Phase I 2008 National Aeronautics and Space Administration
  6. VABS Enabled Design Environment for Efficient High-Fidelity Composite Rotor Blade and Wing Section Design

    SBC: Advanced Dynamics, Inc.            Topic: A08022

    This SBIR aims at developing a high-fidelity, yet efficient and easy-to-use, composite rotor blade and wing section design environment to facilitate rapid and confident aeromechanics assessment during conceptual design stages. A well-known technical barrier for composite rotor blade and wing section design is the lack of an efficient, user friendly, high-fidelity design tool to realistically repre ...

    SBIR Phase I 2008 Department of DefenseArmy
  7. Integrated Variable-Fidelity Tool Set for Modeling and Simulation of Aeroservothermoelasticity-Propulsion (ASTE-P) Effects for Aerospace Vehicles Ranging From Subsonic to Hypersonic Flight

    SBC: Advanced Dynamics, Inc.            Topic: A204

    The proposed research program aims at developing a variable-fidelity software tool set for aeroservothermoelastic-propulsive (ASTE-P) modeling that can be routinely applied to the design of aerospace vehicles. The toolset can be applied to conventional vehicle types as well as hypersonic vehicles. The major issues involved in ASTE-P modeling and simulation will be significantly and extensively inv ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  8. Automated Modeling and Simulation Tool for Lightening the Load of Warfighters

    SBC: VizTek, Inc            Topic: N08T019

    Today’s Warfighter often carries an inordinate load that can lead to injuries and encumbered performance. Equipment is distributed among squad members with little, if any regard for differences in strength and anthropometry. Consequently, the current focus on human-centric design requires a modeling and simulation tool that can reduce the load Warfighters carry and can help distribute equipmen ...

    STTR Phase I 2008 Department of DefenseNavy
  9. A device containing immobilized chelator to remove aluminum from TPN solutions

    SBC: ALKYMOS, INC            Topic: N/A

    DESCRIPTION (provided by applicant): A high percentage of the ~ 470,000 children born prematurely each year in the US require intravenous feeding after birth because they do not tolerate oral feeding. This is accomplished with a total parenteral nutrition (TPN) solution, which is prepared from component solutions: small and large volume parenterals (SVPs and LVPs). Aluminum (Al) is a common conta ...

    STTR Phase I 2008 Department of Health and Human ServicesNational Institutes of Health
  10. SBIR Phase I: Chemoenzymatic Production of Innovative Sesquiterpene-Based Fragrance Libraries

    SBC: Allylix Inc.            Topic: BT

    This Small Business Innovation Research (SBIR) Phase I research project aims to develop a yeast-based platform for the generation of novel sesquiterpene compounds, as well as commercially unavailable sesquiterpene scaffolds. The technique combines metabolic, protein and biochemical approaches to produce defined sesquiterpene scaffolds, which are in turn, used to produce libraries of interesting c ...

    SBIR Phase I 2008 National Science Foundation
US Flag An Official Website of the United States Government